GX Apendice C
4
GX-9100 Software Configuration Tool User’s Guide C-1 © November 1, 2001 Johnson Controls, Inc. www.johnsoncontrols.com Code No. LIT-1201100 Software Release 7.10 Appendix C Updating the DX LCD Display Firmware Introduction You can update a DT-9100 with firmware Version 3.00.00 via the DX LCD Display Update Firmware menu. This feature ne eds to be enabled in the GX Tool initialization file. This chapter describes how to update DX LCD Display firmware.
-
Upload
daniel-nogueira -
Category
Documents
-
view
218 -
download
0
Transcript of GX Apendice C
8/13/2019 GX Apendice C
http://slidepdf.com/reader/full/gx-apendice-c 1/4
GX-9100 Software Configuration Tool User’s Guide C-1
© November 1, 2001 Johnson Controls, Inc. www.johnsoncontrols.comCode No. LIT-1201100 Software Release 7.10
Appendix C
Updating the DX LCD Display
Firmware
Introduction
You can update a DT-9100 with firmware Version 3.00.00 via theDX LCD Display Update Firmware menu. This feature needs to be
enabled in the GX Tool initialization file.
This chapter describes how to update DX LCD Display firmware.
8/13/2019 GX Apendice C
http://slidepdf.com/reader/full/gx-apendice-c 2/4
8/13/2019 GX Apendice C
http://slidepdf.com/reader/full/gx-apendice-c 3/4
GX-9100 Software Configuration Tool User’s Guide C-3
dxd_dldr
Auto
MS
A
Preparing Download file, Please wait.
Preparing Download file, Please wait.Waiting to start boot load to DX Display.
Press the zero <0> key to exit this program.
Press the return <cr> key to start sending the initial download.
Figure C-2: DOS Window
3. Press Zero key to abort the download procedure and return to theGX Tool, or press the Enter key to start the download procedure.
If you press Enter, the DT-9100 is reset with a blank screen and
the download begins (Figure C-3).
When the download is complete, the Finished - dxd_dldr window
appears and the DT-9100 is reset (Figure C-4).
4. Close the download window to return to the GX Tool.
8/13/2019 GX Apendice C
http://slidepdf.com/reader/full/gx-apendice-c 4/4
GX-9100 Software Configuration Tool User’s GuideC-4
dxd_dldr
Auto
MS
A
Parsing Download file, Please wait.
Parsing Download file, Please wait.
Waiting to start boot load to DX Display.Press the zero <0> key to exit this program.
Press the return <cr> key to start sending the initial download.
Received boot load request from user.
Sending boot load request from user.
Sending boot load to DX Display.
*DS* first load size = 69
DS oRxByte is ff
Completed first boot load to DX Display.
Sending second boot load @ 9600 bps
Press the zero <0> key to exit this program.
*DS* second load size = 530
Waiting for acknowledge...
Second boot load to DX Display Completed.
Sending third boot load @ 9600 bps
Press the zero <0> key to exit this program.
148608 bytes sent out of 262144 bytes total.
Figure C-3: Download Starting
Parsing Download file, Please wait.
Parsing Download file, Please wait.Waiting to start boot load to DX Display.
Press the zero <0> key to exit this program.
Press the return <cr> key to start sending the initial download.
Received boot load request from user.
Sending boot load request from user.
Sending boot load to DX Display.
*DS* first load size = 69
DS oRxByte is ff
Completed first boot load to DX Display.
Sending second boot load @ 9600 bps
Press the zero <0> key to exit this program.
*DS* second load size = 530
Waiting for acknowledge...
Second boot load to DX Display Completed.
Sending third boot load @ 9600 bps
Press the zero <0> key to exit this program.
148608 bytes sent out of 262144 bytes total.
Third boot load to DX Display completed.
Figure C-4: Download Complete
