COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO E … · COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO . E...

COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO E DESCONTINUAÇÃO (EOL) DAS SÉRIES S2 e S2B

Data: 04 de dezembro de 2015

Produto: Módulos XBee/XBee-PRO ZigBee

Descrição: Os módulos RF XBee e XBee-PRO da Digi fornecem conectividade sem fio de baixo custo para dispositivos eletrônicos. Eles são interoperáveis com outros dispositivos ZigBee PRO, incluindo os dispositivos de outros fabricantes. Os módulos ZigBee XBee/XBee-PRO S2 e S2B utilizam o transceptor EM250 da Silicon Labs. Com o lançamento da Série S2C, os módulos ZigBee XBee/XBee-PRO agora estão disponíveis com o transceptor EM357. O transceptor EM357 é mais rápido, tem consumo de corrente mais baixo, e tem significativamente mais memória RAM e flash. Esses recursos avançados permitem aos módulos baseados no EM357 suportar mais nós filhos, lidar com mais tráfego de rede, ter mais memória para atualizações de código, e operar de forma mais eficiente. Os novos módulos S2C são compatíveis pino a pino e over-the-air com os módulos S2 e S2B*.

Descontinuação: Com o lançamento da versão S2C, o processo de descontinuação (EOL) dos módulos S2 e S2B será concluído em pelo fabricante em Abril de 2016. Até lá, a Vika Controls continuará fornecendo os modelos S2 e S2B até que a homologação pela ANATEL da Série S2C, já em andamento, seja concluída.

Uma vez que a Série S2C esteja homologada, migraremos para o fornecimento dos respectivos modelos desta nova série. A partir deste momento, o fornecimento de módulos S2 e S2B será feito apenas sob encomenda especial e limitado aos prazos informados abaixo. Após estes prazos, os modelos descontinuados (vide Tabela 1) não serão mais comercializados.

• Para módulos ZigBee XBee-PRO S2 e S2B, o prazo máximo para fornecimento pela Vika Controls será 30 de Abril de 2016;

• Para módulos ZigBee XBee S2 e S2B, o prazo máximo para fornecimento pela Vika Controls será31 de Março de 2016.

Migração: Encorajamos todos os nossos clientes usuários dos módulos S2 e S2B (vide Tabela 1) a se prepararem para o processo de migração de modelos e aproveitar das melhorias de desempenho alcançadas. Para tanto, o guia em anexo irá ajudar com a migração dos módulos XBee ZigBee baseados em EM250 para os módulos XBee ZigBee baseados em EM357.

Em caso de dúvidas sobre o processo de migração, a Vika Controls está à disposição para auxiliá-lo.

*Clientes utilizando o firmware ZNET (part numbers inciando com ‘XB24-B’ ou ‘XBP24-B’) terão compatibilidade pinoa pino, mas não terão compatibilidade RF (over-the-air) com os módulos ZigBee XBee/XBee-PRO S2C.

Rua Dona Germaine Burchard, 443 Perdizes - São Paulo | CEP 05002-060

www.vikacontrols.com.br Tel/Fax: (11) 3159-3674

Tabela 1 – Principais part numbers afetados (a serem descontinuados):

Part Number Descrição XB24-BWIT-001 XBee S2 TH WIRE Coor,API XB24-BWIT-002 XBee S2 TH WIRE Coor,AT XB24-BWIT-003 XBee S2 TH WIRE Router,API XB24-BWIT-004 XBee S2 TH WIRE Router,AT XB24-Z7WIT-001 XBee ZB TH WIRE Coor,API XB24-Z7WIT-002 XBee ZB TH WIRE Coor,AT XB24-Z7WIT-003 XBee ZB TH WIRE Router,API XB24-Z7WIT-004 XBee ZB TH WIRE Router,AT XB24-Z7WIT-005 XBee ZB TH WIRE End Device,API XB24-Z7WIT-006 XBee ZB TH Wire End Device,AT XB24-BCIT-001 XBee S2 TH Chip Coor,API XB24-BCIT-002 XBee S2 TH Chip Corr,AT XB24-BCIT-003 XBee S2 TH Chip Router,API XB24-Z7CIT-001 XBee ZB TH Chip Coor,API XB24-Z7CIT-002 XBee ZB TH Chip Coor,AT XB24-Z7CIT-003 XBee ZB TH Chip Router,API XB24-Z7CIT-005 XBee ZB TH Chip End Device,API XB24-Z7CIT-006 XBee ZB TH Chip End Device,AT XB24-BUIT-001 XBee S2 TH U.flconn Coor,API XB24-BUIT-002 XBee S2 TH U.flconn Corr,AT XB24-BUIT-003 XBee S2 TH U.flconn Router,API XB24-BUIT-004 XBee S2 TH U.flconn Router,AT XB24-Z7UIT-001 XBee ZB TH U.FL Coor,API XB24-Z7UIT-002 XBee ZB TH U.FL Coor,AT XB24-Z7UIT-003 XBee ZB TH U.FL Router,API XB24-Z7UIT-004 XBee ZB TH U.FL Router,AT XB24-Z7UIT-005 XBee ZB TH U.FL End Device,API XB24-Z7UIT-006 XBee ZB TH U.FL End Device,AT XB24-BSIT-001 XBee S2 TH rpsma Coor.,API XB24-BSIT-002 XBee S2 TH rpsma Corr.,AT XB24-BSIT-003 XBee S2 TH rpsma Router,API XB24-BSIT-004 XBee S2 TH rpsma Router,AT XB24-Z7SIT-001 XBee ZB TH RPSMA Coor,API XB24-Z7SIT-002 XBee ZB TH RPSMA Coor,AT XB24-Z7SIT-003 XBee ZB TH RPSMA Router,API XB24-Z7SIT-004 XBee ZB TH RPSMA Router,AT XB24-Z7SIT-005 XBee ZB TH RPSMA End Device,API XB24-Z7SIT-006 XBee ZB TH RPSMA End Device,AT XBP24-BUIT-001 XBee-PRO ZNet 2.5 TH U.FL Coor,API XBP24-BUIT-002 XBee-PRO ZNet 2.5 TH U.FL Coor,AT XBP24-BUIT-003 XBee-PRO ZNet 2.5 TH U.FL Rtr,API XBP24-BUIT-004 XBee-PRO ZNet 2.5 TH U.FL Router,AT XBP24-BWIT-001 XBee-PRO ZNet 2.5 TH Wire Coor,API XBP24-BWIT-002 XBee-PRO ZNet 2.5 TH Wire Coor,AT



XBP24-BWIT-003 XBee-PRO ZNet 2.5 TH Wire Rtr,API XBP24-BWIT-004 XBee-PRO ZNet 2.5 TH WIRE Router,AT XBP24-Z7UIT-001 XBee-PRO ZB TH U.FL Coor,API XBP24-Z7UIT-002 XBee-PRO ZB TH U.FL Coor, AT XBP24-Z7UIT-003 XBee-PRO ZB TH U.FL Router, API XBP24-Z7UIT-004 XBee-PRO ZB TH U.FL Router, AT XBP24-Z7UIT-005 XBee-PRO ZB TH U.FL End Device, API XBP24-Z7UIT-006 XBee-PRO ZB TH U.FL End Device, AT XBP24-Z7WIT-001 XBee-PRO ZB TH Wire XBP24-Z7WIT-002 XBee-PRO ZB TH WIRE Coor,AT XBP24-Z7WIT-003 XBee-PRO ZB TH WIRE Router, API XBP24-Z7WIT-004 XBee-PRO ZB TH WIRE Router, AT XBP24-Z7WIT-005 XBee-PRO ZB TH WIRE End Device, API XBP24-Z7WIT-006 XBee-PRO ZB TH Wire End Device, AT XBP24-BCIT-001 XBee-PRO ZNet 2.5 TH CHIP Coor,API XBP24-BCIT-002 XBee-PRO ZNet 2.5 TH CHIP Coor,AT XBP24-BCIT-003 XBee-PRO ZNet 2.5 TH CHIP Rtr,API XBP24-Z7CIT-002 XBee-PRO ZB TH CHIP Coor, AT XBP24-Z7CIT-003 XBee-PRO ZB TH CHIP Router, API XBP24-Z7CIT-006 XBee-PRO ZB TH CHIP End Device, AT XBP24-BSIT-001 XBee-PRO ZNet 2.5 TH RPSMA Coor,API XBP24-BSIT-002 XBee-PRO ZNet 2.5 TH RPSMA Coor,AT XBP24-BSIT-003 XBee-PRO ZNet 2.5 TH RPSMA Rtr,API XBP24-BSIT-004 XBee-PRO ZNet 2.5 TH RPSMA Router,AT XBP24-SESIT-001 XBee-PRO SE TH RPSMA Coor,API XBP24-Z7SIT-001 XBee-PRO ZB TH RPSMA Coor,API XBP24-Z7SIT-002 XBee-PRO ZB TH RPSMA Coor, AT XBP24-Z7SIT-003 XBee-PRO ZB TH RPSMA Router, API XBP24-Z7SIT-004 XBee-PRO ZB TH RPSMA Router, AT XBP24-Z7SIT-005 XBee-PRO ZB TH RPSMA End Device, API XBP24-Z7SIT-006 XBee-PRO ZB TH RPSMA End Device, AT XBP24BZ7SIT-001 XBP ZB S2B TH SMA Coor API XBP24BZ7SIT-002 XBP ZB S2B TH SMA Coor AT XBP24BZ7SIT-003 XBee-PRO ZB S2B, TH SMA, Rtr API XBP24BZ7SIT-004 XBee-PRO ZB S2B, TH SMA, Rtr AT XBP24BSEWIT-001 XBP, SE S2B TH WIRE Coor,API XBP24BZ7WIT-001 XBee-PRO ZB S2B, TH Wire, Coor API XBP24BZ7WIT-002 XBee-PRO ZB S2B, TH Wire, Coor AT XBP24BZ7WIT-003 XBee-PRO ZB S2B, TH Wire, Rtr API XBP24BZ7WIT-004 XBee-PRO ZB S2B, TH Wire, Rtr AT XBP24BZ7WIT-005 XBP, ZB S2B, TH Wire, End API XBP24BZ7WIT-006 XBP, ZB S2B, TH Wire, End AT XBP24BZ7UIT-001 XBee-PRO ZB S2B, TH UFL, Coor API XBP24BZ7UIT-002 XBee-PRO ZB S2B, TH UFL, Coor AT XBP24BZ7UIT-003 XBee-PRO ZB S2B, TH UFL, Rtr API XBP24BZ7UIT-004 XBee-PRO ZB S2B, TH UFL, Rtr AT XBP24BZ7PIT-001 XBP ZB S2B, TH PCB Ant, Coor API



XBP24BZ7PIT-002 XBP ZB S2B TH PCB Ant Coor AT XBP24BZ7PIT-003 XBP ZB S2B TH PCB Ant Rtr API XBP24BZ7PIT-004 XBee-PRO ZB S2B, TH PCB Ant, Rtr AT XBP24BZ7PIT-005 XBP, ZB S2B, TH PCB Ant, End API XBP24BZ7SITB001 XBP ZB S2B 32K TH SMA Coor API XBP24BZ7SITB003 XBP ZB S2B 32K,TH SMA,Rtr,API XBP24BZ7WITB001 XBP ZB S2B 32K TH Wire Coor API XBP24BZ7WITB003 XBP ZB S2B 32K TH Wire Rtr API XBP24BZ7UITB001 XBP ZB S2B 32K TH UFL Coor API XBP24BZ7UITB003 XBP ZB S2B 32K TH UFL Rtr API XBP24BZ7PITB001 XBP ZB S2B 32K, TH PCB Ant, Coor API XBP24BZ7PITB003 XBP ZB S2B 32K TH PCB Ant Rtr API XBP24BZ7SITA001 XBP, ZB S2B 128K TH SMA Coor API XBP24BZ7SITA003 XBP, ZB S2B 128K TH SMA Rtr API XBP24BZ7WITA001 XBP, ZB S2B 128K TH Wire Coor API XBP24BZ7WITA003 XBP, ZB S2B 128K TH Wire Rtr API XBP24BZ7UITA001 XBP, ZB S2B 128K TH U.FL Coor API XBP24BZ7UITA003 XBP, ZB S2B 128K TH U.FL Rtr API XBP24BZ7PITA001 XBP ZB S2B 128K, TH PCB Ant, Coor API XBP24BZ7PITA003 XBP, ZB S2B 128K, TH PCB Ant, Rtr API XB24-BPIT-001 XBee, S2 TH PCB Coor API XB24-BPIT-002 XBee, S2 TH PCB Coor AT XB24-BPIT-003 XBee, S2 TH PCB Router API XB24-BPIT-004 XBee, S2 TH PCB Router AT XB24-Z7PIT-001 XBee ZB TH PCB Coor, API XB24-Z7PIT-002 XBee, ZB TH PCB Coor AT XB24-Z7PIT-003 XBee, ZB TH PCB Router API XB24-Z7PIT-004 XBee, ZB TH PCB Router AT XBP24-BPIT-001 XBee-PRO ZNet 2.5 TH PCB ANT Coor,API XBP24-BPIT-002 XBee-PRO ZNet 2.5 TH PCB ANT Coor,AT XBP24-BPIT-003 XBee-PRO ZNet 2.5 TH PCB ANT Rtr,API XBP24-BPIT-004 XBee-PRO ZNet 2.5 TH PCB ANT Router,AT XBP24-Z7PIT-001 XBee-PRO ZB TH PCB ANT Coor, API XBP24-Z7PIT-002 XBee-PRO ZB TH PCB ANT Coor, AT XBP24-Z7PIT-003 XBee-PRO ZB TH PCB ANT Router, API XBP24-Z7PIT-004 XBee-PRO ZB TH PCB ANT Router, AT XBP24-Z7PIT-005 XBee-PRO ZB TH PCB ANT End Device, API XBP24-Z7PIT-006 XBee-PRO ZB TH PCB ANT End Device, AT



Tabela 2 – Novos Part Numbers/Descrições dos módulos XBee/XBee-PRO S2C:

Part number Descrição XB24CZ7UIT-004 XBee ZB S2C (Antena conector U.FL) XB24CZ7SIT-004 XBee ZB S2C (Antena conector RPSMA) XB24CZ7WIT-004 XBee ZB S2C (Antena Fio) XB24CZ7PIT-004 XBee ZB S2C (Antena PCB) XB24CZ7UITB003 XBee ZB S2C Programável (Antena conector U.FL) XB24CZ7SITB003 XBee ZB S2C Programável (Antena conector RPSMA) XB24CZ7WITB003 XBee ZB S2C Programável (Antena Fio) XB24CZ7PITB003 XBee ZB S2C Programável (Antena PCB) XBP24CZ7UIT-004 XBee-PRO ZB S2C (Antena conector U.FL) XBP24CZ7SIT-004 XBee-PRO ZB S2C (Antena conector RPSMA) XBP24CZ7WIT-004 XBee-PRO ZB S2C (Antena Fio) XBP24CZ7PIT-004 XBee-PRO ZB S2C (Antena PCB) XBP24CZ7UITB003 XBee-PRO ZB S2C Programável (Antena conector U.FL) XBP24CZ7SITB003 XBee-PRO ZB S2C Programável (Antena conector RPSMA) XBP24CZ7WITB003 XBee-PRO ZB S2C Programável (Antena Fio) XBP24CZ7PITB003 XBee-PRO ZB S2C Programável (Antena PCB)



1

Digi XBee Application Note Migration from XBee/XBee-PRO ZB (S2/S2B) to XBee/XBee-PRO ZB (S2C)

This guide will assist you with migrating from the XBee/XBee-PRO ZB (S2/S2B) to the XBee/XBee-PRO ZB

(S2C) Through-Hole modules. Even though these XBee modules are similar in function, there are some

differences that you need to keep in mind. The S2/S2B used the Ember EM250 microprocessor to

control the ZigBee Protocol. The XBee/XBee-PRO ZB (S2C) module uses the Ember EM357; this new

microprocessor contains much more memory allowing for more flexibility. The footprint of the

XBee/XBee-PRO ZB (S2C) Though-Hole is identical to the XBee/XBee-PRO ZB (S2/S2B) and is fully over-

the-air (OTA) compatible. A key change with the XBee/XBee-PRO ZB (S2C) is that six firmware images

(Coordinator AT, Coordinator API, Router AT, Router API, End Device AT, and End Device API) are

combined into a single firmware load.

Migration Considerations

XBee ZigBee (S2) to XBee ZigBee (S2C) Through-Hole Considerations

Considerations XBee ZB (S2) XBee ZB (S2C) TH Comments

Indoor/Urban Range up to 133 ft. (40 m) Up to 200 ft. (60 m) Improved

Outdoor RF line-of-sight Range

up to 400 ft. (120 m) Up to 4000 ft. (1200 m) Improved

Transmit Power Output

2mW (+3dBm), Boost mode 1.25mW (+1dBm), Normal mode

6.3mW (+8dBm), Boost mode 3.1mW (+5dBm), Normal mode Channel 26 max power is +3dBm

Improved Note: An International variant of the XBee ZB (S2C) TH is not available; the +8dBm non-PRO variant should be used.

Receiver Sensitivity -96 dBm, Boost mode -95 dBm, Normal mode

-102 dBm, Boost mode -100 dBm, Normal mode

Improved

Operating Current (Transmit)

40mA (@ 3.3 V, Boost mode) 35mA (@ 3.3 V, Normal mode)

45mA (+8 dBm, Boost mode) 33mA (+5 dBm, Normal mode)

Slightly higher on boost mode to due to increased output power. Improved on normal mode.

Operating Current (Receive)

40mA (@ 3.3 V, Boost mode) 38mA (@ 3.3 V, Normal mode)

31mA (Boost mode) 28mA (Normal mode)

Improved

SPI Not Supported 5 Mbps maximum (burst) Added SPI interface

FCC ID OUR-XBEE2 MCQ-S2CTH

Customer will need to change the label on their end product to show the appropriate FCC ID for the S2C.

Industry Canada (IC) ID 4214A-XBEE2 1846A-S2CTH

Customer will need to change the label on their end product to show the appropriate IC ID for the S2C.

2

XBee-PRO ZigBee (S2) to XBee-PRO ZigBee (S2C) Through-Hole Considerations

Considerations XBee-PRO ZB (S2) XBee-PRO ZB (S2C) TH Comments

Transmit Power Output 50mW (+17 dBm) 63mW (+18 dBm) Improved

Receiver Sensitivity -102 dBm -101 dBm Comparable

Supply Voltage 3.0 - 3.4 V 2.7 - 3.6 V Larger voltage range


295mA (@3.3 V)

120mA @ +3.3 V, +18 dBm Improved


45 mA (@3.3 V) 31 mA Improved

Power-down Current 3.5A @ 25oC < 1A @ 25

oC Improved

Channels 11 to 24 11 to 25 One additional channel


FCC ID MCQ-XBEEPRO2 MCQ-PS2CTH


Industry Canada (IC) ID 1846A-XBEEPRO2 1846A-PS2CTH


XBee-PRO ZigBee (S2B) to XBee-PRO ZigBee (S2C) Through-Hole Considerations

Considerations XBee-PRO ZB (S2B) XBee-PRO ZB (S2C) TH Comments

Receiver Sensitivity -102 dBm -101 dBm Comparable


205mA, up to 220 mA with programmable variant (@3.3 V)

120mA @ +3.3 V, +18 dBm Improved


47 mA, up to 62 mA with programmable variant (@3.3 V)

31mA Improved

Power-down Current 3.5A @ 25oC < 1A @ 25

oC Improved


FCC ID MCQ-PROS2B MCQ-PS2CTH


Industry Canada (IC) ID 1846A-PROS2B 1846A-PS2CTH


3

Pin Compatibility

The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. The

table below shows which pins are used for the SPI interface. Please refer to the XBee/XBee-PRO ZB (S2C)

product manual for more information.

Pin # XBee/XBee-PRO ZB (S2/S2B) XBee/XBee-PRO ZB (S2C) TH

1 VCC VCC

2 DOUT DOUT / DIO13

3 DIN / CONFIG DIN / CONFIG / DIO14

4 DIO12 DIO12 / SPI_MISO

5 RESET RESET

6 RSSI PWM / DIO10 RSSI PWM / PWMO DIO10

7 DIO11 PWM1 / DIO11

8 [RESERVED] [RESERVED]

9 DTR / SLEEP_RQ/ DIO8 DTR / SLEEP_RQ / DIO8

10 GND GND

11 DIO4 SPI_MOSI / DIO4

12 CTS / DIO7 CTS / DIO7

13 ON / SLEEP ON_SLEEP / DIO9

14 VREF VREF

15 ASSOCIATE / DIO5 ASSOCIATE / DIO5

16 RTS / DIO6 RTS / DIO6

17 AD3 / DIO3 AD3 / DIO3 / SPI_SSEL

18 AD2 / DIO2 AD2 / DIO2 / SPI_CLK

19 AD1 / DIO1 AD1 / DIO1 / SPI_ATTN

20 AD0 / DIO0 / COMMISIONING BUTTON AD0 / DIO0 / COMMISIONING BUTTON

4

Part Number Migration Guide

The following table shows which XBee/XBee-PRO ZB (S2C) module to migrate to depending on which

XBee/XBee-PRO ZB (S2/S2B) module you are currently using.

Legacy Part Number

Description Migrate To Description

XB24-BPIT-*** XBee ZB (ZNet 2.5) low power ZigBee module w/ PCB antenna

XB24CZ7PIT-004 XBee ZB (S2C) low power ZigBee module w/ PCB antenna

XB24-BSIT-*** XBee ZB (ZNet 2.5) low power ZigBee module w/ RPSMA connector

XB24CZ7SIT-004 XBee ZB (S2C) low power ZigBee module w/ RPSMA connector

XB24-BUIT-*** XBee ZB (ZNet 2.5) low power ZigBee module w/ U.FL connector

XB24CZ7UIT-004 XBee ZB (S2C) low power ZigBee module w/ U.FL connector

XB24-BWIT-*** XBee ZB (ZNet 2.5) low power ZigBee module w/ integrated wire antenna

XB24CZ7WIT-004 XBee ZB (S2C) low power ZigBee module w/ integrated wire antenna

XBP24-BPIT-*** XBee-PRO ZB (ZNet 2.5) module w/ PCB antenna

XBP24CZ7PIT-004 XBee-PRO ZB (S2C) module w/ PCB antenna

XBP24-BSIT-*** XBee-PRO ZB (ZNet 2.5) module with RPSMA connector

XBP24CZ7SIT-004 XBee-PRO ZB (S2C) module with RPSMA connector

XBP24-BUIT-*** XBee-PRO ZB (ZNet 2.5) module w/ U.FL antenna connector

XBP24CZ7UIT-004 XBee-PRO ZB (S2C) module w/ U.FL antenna connector

XBP24-BWIT-*** XBee-PRO ZB (ZNet 2.5) module w/ wire antenna

XBP24CZ7WIT-004 XBee-PRO ZB (S2C) module w/ wire antenna

XBP24-BPIT-***J XBee-PRO ZB (ZNet 2.5) module w/ PCB antenna (International)


XBP24-BSIT-***J XBee-PRO ZB (ZNet 2.5) module with RPSMA connector (International)


XBP24-BUIT-***J XBee-PRO ZB (ZNet 2.5) module w/ U.FL antenna connector (International)


XBP24-BWIT-***J XBee-PRO ZB (ZNet 2.5) module w/ wire antenna (International)


XB24-Z7PIT-*** XBee ZB (S2) low power ZigBee module w/ PCB antenna


XB24-Z7WIT-*** XBee ZB (S2) low power ZigBee module w/ integrated wire antenna


XB24-Z7UIT-*** XBee ZB (S2) low power ZigBee module w/ U.FL connector


XB24-Z7SIT-*** XBee ZB (S2) low power ZigBee module w/ RPSMA connector


XBP24-Z7PIT-*** XBee-PRO ZB (S2) module w/ PCB antenna


XBP24-Z7WIT-*** XBee-PRO ZB (S2) module w/ wire antenna


5

XBP24-Z7UIT-*** XBee-PRO ZB (S2) module w/ U.FL antenna connector


XBP24-Z7SIT-*** XBee-PRO ZB (S2) module with RPSMA connector


XBP24-Z7PIT-***J XBee-PRO ZB (S2) module w/ PCB antenna (International)


XBP24-Z7WIT-***J XBee-PRO ZB (S2) module w/ wire antenna (International)


XBP24-Z7UIT-***J XBee-PRO ZB (S2) module w/ U.FL antenna connector (International)


XBP24-Z7SIT-***J XBee-PRO ZB (S2) module with RPSMA connector (International)


XBP24BZ7PIT-*** XBee-PRO ZB (S2B) module w/ PCB antenna


XBP24BZ7SIT-*** XBee-PRO ZB (S2B) module with RPSMA connector


XBP24BZ7UIT-*** XBee-PRO ZB (S2B) module w/ U.FL antenna connector


XBP24BZ7WIT-*** XBee-PRO ZB (S2B) module w/ wire antenna


XBP24BZ7PIT-***J XBee-PRO ZB (S2B) module w/ PCB antenna (International)


XBP24BZ7SIT-***J XBee-PRO ZB (S2B) module with RPSMA connector (International)


XBP24BZ7UIT-***J XBee-PRO ZB (S2B) module w/ U.FL antenna connector (International)


XBP24BZ7WIT-***J XBee-PRO ZB (S2B) module w/ wire antenna (International)


XBP24BZ7SITB*** Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ RPSMA connector

XBP24CZ7SITB003 Programmable XBee-PRO ZB (S2C) extended range ZigBee module w/ RPSMA connector

XBP24BZ7WITB***

Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ integrated wire antenna

XBP24CZ7WITB003 Programmable XBee-PRO ZB (S2C) extended range ZigBee module w/ integrated wire antenna

XBP24BZ7PITB*** Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ PCB antenna

XBP24CZ7PITB003 Programmable XBee-PRO ZB (S2C) extended range ZigBee module w/ PCB antenna

XBP24BZ7UITB*** Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ U.FL connector

XBP24CZ7UITB003 Programmable XBee-PRO ZB (S2C) extended range ZigBee module w/ U.FL connector

XBP24BZ7SITB***J

Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ RPSMA connector (International)

XB24CZ7SITB003 Programmable XBee ZB (S2C) low power ZigBee module w/ RPSMA connector

6

XBP24BZ7WITB***J

Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ integrated wire antenna (International)

XB24CZ7WITB003 Programmable XBee ZB (S2C) low power ZigBee module w/ integrated wire antenna

XBP24BZ7PITB***J

Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ PCB antenna (International)

XB24CZ7PITB003 Programmable XBee ZB (S2C) low power ZigBee module w/ PCB antenna

XBP24BZ7UITB***J

Programmable XBee-PRO ZB (S2B) extended range ZigBee module w/ U.FL connector (International)

XB24CZ7UITB003 Programmable XBee ZB (S2C) low power ZigBee module w/ U.FL connector

Configuration

The XBee/XBee-PRO ZB (S2/S2B) modules had six different firmware images (Coordinator AT,

Coordinator API, Router AT, Router API, End Device AT, and End Device API). The XBee/XBee-PRO ZB

(S2C) modules combine these six function sets into a single firmware image. The table below shows you

which settings to enable on the XBee/XBee-PRO ZB (S2C) modules to match the function set you were

using on the XBee/XBee-PRO ZB (S2/S2B) modules.

XBee/XBee-PRO ZB (S2/S2B) Function Set XBee/XBee-PRO ZB (S2C) Firmware Settings

ZigBee Router AT Default Settings

ZigBee Router API Set AP (API Enable) = API enabled [1]

ZigBee Coordinator AT Set CE (Coordinator Enable) = Enabled [1]

ZigBee Coordinator API Set CE (Coordinator Enable) = Enabled [1] Set AP (API Enable) = API enabled [1]

ZigBee End Device AT Set SM (Sleep Mode) = Cyclic Sleep [4]

ZigBee End Device API Set SM (Sleep Mode) = Cyclic Sleep [4] Set AP (API Enable) = API enabled [1]

7

What’s New

The XBee/XBee-PRO ZB (S2C) introduces some new features and commands such as:

An alternative serial port is available using SPI slave mode operation

Six firmware images (Coordinator AT, Coordinator API, Router AT, Router API, End Device AT,

and End Device API) are combined into a single firmware

o ATCE command (1-enables/0-disables) Coordinator mode

o ATSM command (0 is Router/Coordinator, nonzero is sleeping End Device)

o Note that Coordinator mode cannot be enabled is SM is nonzero and you can’t set a

nonzero SM if CE is nonzero

Fragmentation is now available in both API mode and transparent mode

P3 (DOUT), P4 (DIN), D8 (SleepRq), and D9 (On-Sleep) are now available for I/O sampling

Both pull-up and pull-down resistors can now be applied to pins configured for inputs

ATVL command added for long version information

ATDO command added for configuring device options

ATAS command added for Active Scan

Self-addressed Tx Status messages return a status code of 0x23

ATDO has HIGH_RAM_CONCENTRATOR and NO_ACK_IO_SAMPLING options added

Binding and Multicasting transmissions are supported

AT&X command added to clear binding and group tables

Added Tx options 0x04 (indirect addressing) and 0x08 (multicast addressing)

A 5 second break will reset the XBee. Then it will boot with default baud settings into command

mode.

BD range increased from 0-7 to 0-0x0A, and nonstandard baud rates are permitted, but not

guaranteed

NI, DN, ND string parameters support upper and lower case

TxOption 0x01 disables retries and route repair. RxOption 0x01 indicates the transmitter

disabled retries.

FR returns 0x00 modem status code instead of 0x01

DC10 - verbose joining mode option

Self-addressed fragmentable messages now return the self-addressed Tx Status code (0x23)

instead of simply success (0x00)

Three command characters ("+++") typed rapidly will shift the device from API mode to AT

command mode

ATCN will shift the device from AT command mode to API mode

COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO E … · COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO . E...

Documents

Transcript of COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO E … · COMUNICADO DE LANÇAMENTO DE NOVO PRODUTO . E...