Soluções Tubulares para o Mercado de Energia Tubular Solutions for the Energy Market
VallourecUsina BarreiroBarreiro Plant
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.3
Líder mundial na fabricação de tubos de aço sem costura e em soluções tubulares premium, o GRUPO VALLOUREC está presente em mais de 20 países, com 50 unidades industriais, escritórios de vendas, seis centros de pesquisa e 23 mil empregados para atender às demandas dos setores de energia, petrolífero, industrial, construção civil e automotivo.No Brasil há mais de 60 anos, a Empresa tem o controle das seguintes unidades produtivas: Vallourec Tubos do Brasil S.A, Vallourec Mineração Ltda., Vallourec Florestal Ltda., Vallourec Transporte e Serviços Ltda., Tubos Soldados Atlântico S.A e Serimax, que trabalham de forma integrada para atender as necessidades de cada projeto.
A world leader in the manufacturing of seamless steel tubes and in tubular premium solutions, the VALLOUREC Group is present in more than 20 countries. Vallourec relies on 50 industrial units and sales offices, 6 research centers and 23 thousand employees; Vallourec is ready to meet the demands of the energy, oil and gas, industrial, civil construction and automotive sectors.Established in Brazil for more than 60 years, the company operates the following production units: Vallourec Tubos do Brasil S.A, Vallourec Mineração Ltda., Vallourec Florestal Ltda., Vallourec Transporte and Serviços Ltda., Tubos Soldados Atlântico S.A and Serimax. These units work as integrated facilities to meet the needs of each project.
Sobre a Vallourec
About Vallourec
p.4 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Especializada também nas aplicações mais complexas, a Vallourec possui seis centros de pesquisa e mais de 500 engenheiros e técnicos dedicados à busca de soluções eficientes para seus clientes.São especialistas em metalurgia, comportamento mecânico, ensaios destrutivos e não-destrutivos, solda, corrosão, oxidação, tratamento de superfície e simulações de processos e de transferência de calor.A área de Pesquisa & Desenvolvimento (P&D) está em sintonia com a evolução do mercado. Nossas equipes atuam em estreita colaboração com os clientes para desenvolver, industrializar e comercializar novos produtos e serviços.
Uma Empresa Inovadora An Innovate Company
EUropa
aMérIca do NorTE NorTh aMErIca
Aciarias / Steel mills Usinas de produção de tubos / Tube mills Unidades de acabamento / Finishing units Centros de P&D / R&D centers Silvicultura e Mineração / Plantation and mine Escritórios de vendas e serviços / Sales & services offices
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.5
Also specialized in more complex applications, Vallourec relies on 6 research centers and employs more than 500 engineers and technicians who are dedicated to the pursuit of more effective solutions for their clients.They are specialists in metallurgy, mechanical behavior, destructive and non –destructive testing, welding, corrosion, steam oxidation, surface treatment, product and process simulations and heat transfer technology.Our Research and Development area (R&D) is attuned to the evolution of market needs. Our teams work in close contact and collaboration with our clients to develop, industrialize and commercialize new services and products.
LIdEraNÇa
• A mais ampla gama de tubos sem costura do mundo
• Líder mundial em conexões premium com a linha de produtos VAM®
• Líder mundial em soluções de soldagem integradas para projetos offshore
• Mundialmente classificada em segundo lugar no mercado de tubos offshore, especializada em poços profundos e ultraprofundos
• Líder mundial e único fornecedor de toda a gama de tubos para usinas de energia
• Líder europeu em tubos sem costura para aplicações mecânicas
LEADERSHIP
• Thebroadestrangeofseamlesstubesandpipesintheworld
•World leader inpremiumconnectionswith the VAM®productline•Worldleaderinintegratedweldingsolutionsfor offshoreprojects•World N° 2 on the offshore line pipe market, specializingindeepandultra-deepwells
•Worldleaderandonlysuppliertooffertheentire rangeoftubesandpipeforpowerplants•European leader in seamless tubes for mechanicalapplications
aMérIca do SUL SoUTh aMErIca
ÁSIa E orIENTE MédIo aSIa aNd MIddLE EaST
p.6 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
SUMÁrIo
INTRODUCTORy REMARkS
Vallourec assures the accuracy of the information and data published in this catalog. Any use or copy of this content should be kept authentic. Otherwise Vallourec disclaims any responsibility for the results obtained through the incorrect use of this material.
CONSIDERAÇÕES
A Vallourec buscou ser precisa quanto às informações e aos dados apresentados neste catálogo. A Empresa solicita que o uso e a replicação do conteúdo sejam feitos de forma responsável para manter a coerência, a veracidade e a segurança dos textos. Dessa forma, a Vallourec não se responsabiliza pelos resultados obtidos por meio da utilização incorreta deste material.
Fluxograma de ProduçãoProduction flow Chart
Processo de ProduçãoProductive Process
Qualidade Certificada seja qual for a AplicaçãoCertified Quality whatever the Application
Exemplos de Aplicação Examples of Applications
p.8
p.10
p.12
p.14
Agregando Valor ao seu Negócio Adding Value to Your Business
p.18
Tubos de Condução Line Pipes
p.20
Soluções Line Pipe para aplicação Onshore e Offshore Line Pipe Solutions for Onshore and Offshore applications
p.22
Tubos para Caldeiras e Trocadores de Calor Tubes for Boilers and Heat Exchangers
p.50
Responsabilidade Social Social Sustainability
p.66
p.8 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Os produtos Vallourec são ambientalmente corretos. Os tubos de aço sem costura são fabricados com aço cujo processo de produção utiliza o carvão vegetal como termo-redutor. Isso significa que, para cada tonelada de aço fabricada na Usina Barreiro (MG) com carvão vegetal, fornecido pela unidade Florestal, deixa-se de acumular 1,99 toneladas de CO2.
Vallourec’s products are environmentally sustainable. We use charcoal as a thermo reductant to produce the steel used in our seamless steel tubes. This means that, for every ton of steel manufactured at the Barreiro Plant (MG) with charcoal (supplied by the Florestal unit) 1,99 tons of CO2 build up is avoided.
processo Integrado de produção Integrated Productive Process
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.9
p.10 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Fluxograma de produção Production Flow Chart
ARGON STIRRING
IRON OREMINÉRIO DE FERRO CHARCOAL
CARVÃO VEGETAL
PIG IRONFERRO-GUSA
BLAST FURNACEALTO-FORNO
SAWSERRA
STRETCH REDUCING MILLLAMINADOR REDUTOR
SCALE REMOVALDESCAREPADOR HIDRÁULICO
COOLING BEDLEITO DE RESFRIAMENTO SHELL REDUCING MILLLAMINADOR REDUTOR
PIERCING MILLLAMINADOR PERFURADORCONTINUOUS ROLLING MILLLAMINADOR CONTÍNUOCOOLING BEDLEITO DE RESFRIAMENTOWALKING BEAM REHEATING FURNACE
FORNO DE REAQUECIMENTO DE SOLEIRA CAMINHANTE
ROTARY HEARTH FURNACEFORNO ROTATIVO
SCRAP (20% max.)SUCATA (20% max.)
BOF LD ConverterBOF Convertedor LD
LADLE FURNACE(70 tons)
VACUUM DEGASSERFORNO-PANELA
(70 ton)
DESGASEIFICADOR A VÁCUO
STEEL PLANT
PRODUÇÃO DE AÇO
CONTINUOUS MANDREL MILL (1" to 7")LAMINAÇÃO CONTÍNUA (1" a 7")
PLUG MILL (6" to 14")LAMINAÇÃO AUTOMÁTICA (6" a 14")
CONTINUOUS CASTINGLINGOTAMENTO CONTÍNUO
ROUND BARBARRA
ROUND BARBARRA
HOMOGENEIZAÇÃO COM ARGÔNIO
WALKING BEAM FURNACE DOUBLE ROWFORNO DE SOLEIRA CAMINHANTE DUPLA
PLUG MILLLAMINADOR COM MANDRIS
PIERCING MILLLAMINADOR PERFURADORREELERREELER
COOLING BEDLEITO DE RESFRIAMENTO
WALKING BEAM REHEATING FURNACE
FORNO DE REAQUECIMENTO DE SOLEIRA CAMINHANTE
SCALE REMOVALDESCAREPADOR HIDRÁULICO
SIZING MILL
LAMINADOR ACABADOR
COOLING BEDLEITO DE RESFRIAMENTO
PIERCING MILLLAMINADOR OBLÍQUO
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.11
ARGON STIRRING
IRON OREMINÉRIO DE FERRO CHARCOAL
CARVÃO VEGETAL
PIG IRONFERRO-GUSA
BLAST FURNACEALTO-FORNO
SAWSERRA
STRETCH REDUCING MILLLAMINADOR REDUTOR
SCALE REMOVALDESCAREPADOR HIDRÁULICO
COOLING BEDLEITO DE RESFRIAMENTO SHELL REDUCING MILLLAMINADOR REDUTOR
PIERCING MILLLAMINADOR PERFURADORCONTINUOUS ROLLING MILLLAMINADOR CONTÍNUOCOOLING BEDLEITO DE RESFRIAMENTOWALKING BEAM REHEATING FURNACE
FORNO DE REAQUECIMENTO DE SOLEIRA CAMINHANTE
ROTARY HEARTH FURNACEFORNO ROTATIVO
SCRAP (20% max.)SUCATA (20% max.)
BOF LD ConverterBOF Convertedor LD
LADLE FURNACE(70 tons)
VACUUM DEGASSERFORNO-PANELA
(70 ton)
DESGASEIFICADOR A VÁCUO
STEEL PLANT
PRODUÇÃO DE AÇO
CONTINUOUS MANDREL MILL (1" to 7")LAMINAÇÃO CONTÍNUA (1" a 7")
PLUG MILL (6" to 14")LAMINAÇÃO AUTOMÁTICA (6" a 14")
CONTINUOUS CASTINGLINGOTAMENTO CONTÍNUO
ROUND BARBARRA
ROUND BARBARRA
HOMOGENEIZAÇÃO COM ARGÔNIO
WALKING BEAM FURNACE DOUBLE ROWFORNO DE SOLEIRA CAMINHANTE DUPLA
PLUG MILLLAMINADOR COM MANDRIS
PIERCING MILLLAMINADOR PERFURADORREELERREELER
COOLING BEDLEITO DE RESFRIAMENTO
WALKING BEAM REHEATING FURNACE
FORNO DE REAQUECIMENTO DE SOLEIRA CAMINHANTE
SCALE REMOVALDESCAREPADOR HIDRÁULICO
SIZING MILL
LAMINADOR ACABADOR
COOLING BEDLEITO DE RESFRIAMENTO
PIERCING MILLLAMINADOR OBLÍQUO
p.12 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Qualidade certificada seja qual for a aplicação
Certified Quality whatever the Application
Com excelência reconhecida pelos clientes e pelas certificações internacionais ISO 9001, ISO 14001, ISO 50001, PED, OHSAS 18001, ISO/TS 16949, CERFLOR, API Spec Q1, API Spec 5CT, API Spec 5L e API Spec 5DP, DNV Rules for Classification Pt2-Steel Tubes and Pipes e ANPEI, os tubos Vallourec asseguram o alto grau de qualidade e confiabilidade estrutural e operacional nas suas diversas aplicações.
Having its excellence acknowledged by its clients and by international certifications such as: ISO 9001, ISO 14001, ISO 50001, PED, OHSAS 18001, ISO/TS 16949, CERFLOR, API Spec Q1, API Spec 5CT, API Spec 5L e API Spec 5DP, DNV Rules for Classification Pt2-Steel Tubes and Pipes e ANPEI, Vallourec tubes assure the highest levels of quality as well as structural and operational reliability for the whole range of its applications.
VALLOUREC TUBOS DO BRASIL S.A.
Av. Olinto Meireles, 65, Barreiro de Baixo, 30640-010 - Belo Horizonte/MG
Brazil
Bureau Veritas Certification certify that the Management System of the
above organization has been audited and found to be in accordance
with the requirements of the management system standards detailed below
Standards
ISO 14001:2004
Scope of certification
MANUFACTURE OF PIG IRON, CAST BAR, BILLETS, TUBE ROUNDS, CONTINUOUS
CAST BAR, HOT ROLLED BARS, COLD DRAWN BARS, SEAMLESS HOT ROLLED PIPES
AND TUBES, SEAMLESS COLD DRAWN TUBES, SEAMLESS PIPES FOR THE PETROLEUM
INDUSTRY (OCTG AND LINE PIPE), PUP JOINT COUPLING AND FORGED TUBES.
Certification cycle start date: 11 September 2011
Subject to the continued satisfactory operation of the organization’s Management
System, this certificate expires on: 10 September 2014
Original certification date:11 September 2011
Certificate No. BR014564 Version: 3
Revision date: 26 July 2013
Certification Authority
Local office: Lúcia Nunes – Technical Manager
Av. Café, 277 - Tower B - 5th floor - São Paulo - SP
Zip: 04311-000 - Brazil
Further clarifications regarding the scope of this certificate and the applicability of the management system requirements
may be obtained by consulting the organization. To check this certificate validity please call +551126559000.
OHSAS 18001:2007
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.13
p.14 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Exemplos de aplicações dos produtos Examples of Product Applications
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.15
p.16 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Os produtos Vallourec têm elevado índice de nacionalização (conteúdo local) para atender às mais variadas demandas do mercado de energia:
• Refinarias;• Químicas/Petroquímicas;• FPSO/FLNG;• Indústria Naval/Estaleiros;• Plantas de Tratamento e Distribuição de
Gás;• Unidades Fertilizantes;• Mineradoras;• Siderúrgicas;• Usinas de Alumínio;• Plantas de Papel e Celulose;• Usinas de Açúcar e Álcool;• Termelétricas;• Gasodutos;• Flowlines e Risers.
Vallourec products contain an elevated rate of local content and meet a wide variety of demands from the energy market:
• Refinaries;• Chemical/Petrochemical;• FPSO/FLNG;• Naval Industry/Shipyards;• Gas Treatment and Distribution Plants;• Fertilizer Units;• Mines;• Steel Plants;• Aluminium Plants;• Paper and Cellulose Mills;• Sugar and Ethanol Mills;• Thermoelectric Power plants;• Onshore Pipeline;• Flowlines and Risers.
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.17
p.18 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
FIELd SoLUTIoN - CONSULTORIA ESPECIALIzADA
Ao adquirir os produtos Vallourec, o cliente recebe atendimento personalizado e assistência técnica para o uso eficiente das soluções tubulares. Toda essa assessoria é gratuita e fornecida pela equipe de técnicos do Field Solution, criada especialmente para atender às necessidades de cada cliente de forma diferenciada, com pontualidade, agilidade e flexibilidade.Além de orientar sobre aplicações já existentes, a equipe do Field Solution oferece o suporte necessário para o desenvolvimento de novas soluções de acordo com as características de cada projeto/segmento.
Entre elas:
• Solda, metalurgia, tratamento térmico e testes; • Elaboração de layout logístico;• Descarregamento e manuseio;• Gestão de estoques;• Inspeção de qualidade;• Rastreabilidade dimensional e documental;• Suporte técnico em manutenção e projetos.
FIELD SOLuTION – SPECIALIzED CONSuLTINg
When acquiring Vallourec products, our client receives customized services and technical assistance for the effective use of our tubular solutions. All of this assistance is free of charge and is supplied by the Field Solution technicians. Field Solution was set up specially to meet the needs of each client in a customized way. These services are delivered in a timely manner, with speed and flexibilityBesides advising on already existing uses, Field Solution team offers the necessary support for the development of new solutions according to the characteristics of each project/segment.
Among them is:
• Welding, metallurgy, thermo treatment and testing; • Development of logistics layout;• Unloading and handling;• Inventory management;• Quality inspection;• Dimensional and traceability reports;• Technical support in maintenance and projects.
agregando Valor ao seu Negócio Adding Value to Your Business
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.19
SErVIÇoS VaLLoUrEc - ATENDIMENTO DIFERENCIADO E QUALIDADE COMPROVADA
Através de uma estrutura completa e cuidadosamente qualificada, a Vallourec investe em inovação customizando produtos e serviços para atender aos mais rígidos requisitos do mercado, agregando valor e favorecendo ganhos de produtividade e redução de custos seja na obra ou no processo produtivo do cliente.
Principais serviços:
• Aletamento;• Corte de tubos;• Curvamento por indução a quente;• Double Joint;• End-Truing;• Galvanização;• Jateamento/pintura externa e interna (N-0442 e outras);• Revestimento internos e externos (anti-corrosivos, térmico e de
garantia de fluxo);• Rosca e luva BSP/NPT;• Serviços Logísticos;• Soldagem.
VALLOuREC SERVICES – DISTINCT CuSTOmER SERVICES AND RENOwN QuALITy
Having a complete and carefully qualified structure, Vallourec invests in innovation, tailoring products and services to meet the most rigorous market standards, adding value to products and processes and favoring productivity gains and cost reduction whether it be at the construction site or in the our client’s productive process.
Main services provided:
• Finned Tubes;• Tube cutting;• Bending through heat induction;• Double Joint;• End-Truing;• Galvanization;• Blasting/outer and inner paint (N-0442 and others);• Inner and outer coating (anti-corrosion, thermo and flow assurance);• BSP/NPT Threads and couplings;• Logistic services;• Welding.
Tubos de Condução Line Pipes
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.21
Os tubos de aço sem costura produzidos pela Vallourec possuem qualidade diferenciada para o transporte de fluidos. Reconhecidos pelo excelente desempenho e resistência em ambientes críticos, podem ser aplicados em condições extremas de variação de temperatura, pressão, ambientes corrosivos, abrasivos e criogênicos. Nossos produtos atendem as mais exigentes especificações técnicas para garantir o excelente desempenho mecânico, precisão dimensional e integridade estrutural. Além de fornecer diretamente para o mercado, a Vallourec, para atender seus clientes nas mais diferentes demandas, possui na América Latina uma rede de distribuidores credenciados para entregas em quantidades variáveis, de acordo com a demanda do projeto.
The seamless steel pipes manufactured by Vallourec have distinct qualities for fluid conveyance. known for their excellent performance and resistance in the harshest environments, they can be applied in conditions of extreme variations in temperature, pressure, corrosive environments, and abrasive and cryogenic conditions. Our products meet the most demanding technical specifications to assure excellent mechanical performance, dimensional precision and structural integrity. Besides direct market supply Vallourec relies on an accredited distribution network in Latin America to meet its clients demands in varying quantities and according to project demands.
FLNG / FPSO
EstaleirosShipyards/Shipbuilding
RefinariasRefineries
GasodutosOnshore Pipeline
MineraçãoMining
PetroquímicaPetrochemicals
Soluções Line Pipe para aplicação Onshore e Offshore Line Pipe Solutions for Onshore and Offshore applications
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.23
by S
teph
an C
aso
Soluções em Line pipe A Vallourec desenvolveu uma variada gama de produtos e serviços integrados para atender projetos de condução e transporte. Desde a elaboração de especificações técnicas, em conjunto com o cliente, até a entrega personalizada, a integração de produtos e serviços resulta na oferta de soluções completas.No pacote: dimensionais padronizados ou sob medida, tolerâncias restritas nas pontas dos tubos através de moderno sistema de medição e usinagem, serviços de soldas, curvamento de tubulações, revestimentos anticorrosivos, para isolamento térmico ou internos e, ainda, logística especializada e pontual.
Line pipe SolutionsVallourec has developed a wide variety of products and integrated services to supply line pipe and transport projects. From elaborating technical specifications together with the client to personalized delivery, the integration of products and services results in the offering of complete solutions.In the package: standardized or customized dimensions, restricted tolerances at the ends (reached through a modern system of measuring and machining), welding services, bending, anticorrosion coating, thermo insulation, internal coating and specialized and timely logistics.
Gestão de projetos A Vallourec dispõe de uma equipe de especialistas que acompanham as demandas dos clientes e asseguram uma interface ativa entre comunicação e gestão de projetos.Dependendo da complexidade do empreendimento, o fornecimento fica a cargo das diversas unidades produtoras ao redor do mundo, inteiramente administrada pela Vallourec.
project managementVallourec has a team of experts available to follow up on client demands and assure an active communication insuring work flow is flawless during project managementDepending on the complexity of the project, supply stays with one of our many production facilities around the world, fully managed by Vallourec.
onshore & offshoreA diversidade de projetos dos segmentos Onshore e Offshore, é plenamente atendida pela variada gama de produtos e serviços da Vallourec. A integração, seja por meio das de empresas do grupo Vallourec ou via parceiros, visa oferecer soluções integradas e simplificar o processo de contratação e execução do projeto. A experiência da companhia nesses segmentos, somada à estrutura de suporte e produção em todo o mundo, resulta na oferta das melhores soluções para atender as demandas dos clientes.
Onshore & OffshoreThe diversity of projects of the Onshore and Offshore segments is fully met by the wide range of Vallourec’s products and services. Integration, whether by means of companies in the Vallourec group or through partners, aims at offering integrated solutions from tendering to delivering making the process hassle – free. The company’s experience in these segments, in addition to its worldwide production facilities and customer support systems , make it possible for Vallourec to offer its clients the best solutions to meet their demands.
p.24 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
grau (a)Grade (a)
C (máx.) (b)
mn (máx.) (b)
P S (máx.)
V Nb Ti(mín.) (máx.)
A25 0,21 0,60 - 0,030 0,030 -
A25P 0,21 0,60 0,045 0,080 0,030 -
A 0,22 0,90 - 0,030 0,030 -
B 0,28 1,20 - 0,030 0,030 c, d
X42 0,28 1,30 - 0,030 0,030 d
X46/ X52/ X56 0,28 1,40 - 0,030 0,030 d
X60 / X65 / X70 0,28 e 1,4 e - 0,030 0,030 f
grauGrade
Limite de escoamento (mín)Yield strength (min)
Resistência à tração (mín)Tensile strength (min)
psi mPa psi mPa
A25 / A25P 25.400 175 45.000 310
A 30.500 210 48.600 335
B 35.500 245 60.200 415
X42 42.100 290 60.200 415
X46 46.400 320 63.100 435
X52 52.200 360 66.700 460
X56 56.600 390 71.100 490
X60 60.200 415 75.400 520
X65 65.300 450 77.600 535
X70 70.300 485 82.700 570
Conforme tabela 12 da Norma API 5L
According to table 12 of the standard API 5L
6m (20 pés): 2,74 a 6,86m (9,0 a 22,5 pés), com média mínima de 5,33m (17,5 pés)12m (40 pés): 4,27 a 13,72m (14,0 a 45,0 pés), com média mínina de 10,67m (35,0 pés)
6m(20ft):2,74to6,86m(9,0to22,5ft),withminimumaverageof5,33m(17,5ft)12m(40ft):4,27to13,72m(14,0to45,0ft),withminimumaverageof10,67m(35,0ft)
FabricaçãoStandard manufacturing lengths
4 a 8 metros ou 8 a 13 metros4to8metersor8to13meters
Fixos ou FaixasOther lengths or ranges
Mediante consultauponrequest
Obs.:a) Cu = 0,50% máx. Ni = 0,50% máx. Cr = 0,50% máx. Mo = 0,15% máx. b) Para cada 0,01% de redução sobre o carbono máximo especificado, é permitido um acréscimo de 0,05% sobre o manganês máximo especificado, até um máximo de
1,65% para os graus B até X52, até 1,75% para os graus X56 até X65 e até 2,00% para o grau X70 c) Salvo acordado de outra forma a soma de Nb + V ≤ 0,06% d) A soma de Nb + V + Ti ≤ 0,15% e) Salvo especificado de outra forma f) Salvo especificado de outra forma a soma de Nb + V + Ti ≤ 0,15
Obs.:a) Cu = 0,50% max. Ni = 0,50% max. Cr = 0,50% max. Mo = 0,15% max. b) Each 0,01% reduction in maximum specified carbon allows, 0,05% increase in maximum specified manganese up to a limit of 1,65% for grades B to x52 , 1,75%
for grades X56 to X 65 and up to 2 % for the grades X70c) If not agreed diferently, the sum of Nb + V ≤ 0,06% d) The sum of Nb + V + Ti ≤ 0,15% e) Unless otherwise agreed f) Unless otherwise agreed the sum of Nb + V + Ti ≤ 0,15
Obs: Alongamento conforme a normaObs: Elongation as per standard
API 5L - LINE PIPE - PSL11 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
3 - COmPRImENTOS / LENgThS
Tubos de aço Sem costura para condução de produtos petrolíferos e outros FinsSeamless Steel Pipes for Oil Product Conveyance and Other Purposes
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.25
Diâmetro ExternoOutside diameter
Até 48,3 mm (1.9’’): + 0,40 mm (+0.016’’) - 0,80 mm (- 0.031’’)60,3mm (2.3/8’’) e maior: +/- 0,75%
Upto48,3mm(1.9’’):+0,40mm(+0.016’’)-0,80mm(-0.031’’)60,3mm(2.3/8’’)andlarger:+/-0,75%
Espessura de ParedeWall thickness
≤ 4,0mm (0.157’’): + 0,6mm (0.024’’) - 0,5mm (0.020’’) > 4,0mm (0.157’’) a < 25,0mm (0.984’’): + 15% - 12,5%≥ 25,0mm (0.984’’): + 3,7mm (0.146’’) ou + 10% o que for maior - 3,0mm (0.120’’) ou - 10% o que for maior ≤4,0mm(0.157’’):+0,6mm(0.024’’)-0,5mm(0.020’’)>4,0mm(0.157’’)a<25,0mm(0.984’’):+15%-12,5%≥25,0mm(0.984’’):+3,7mm(0.146’’)or+10%Whicheveristhegrater-3,0mm(0.120’’)or-10%Whicheveristhegrater
PesoWeight
Por Tubo: Grau A, B e X42 a X70: + 10% - 3,5% Grau A25: + 10% - 5% Por Lote: Grau A, B e X42 a X70: -1,75% Grau A25: -3,5%
PerTube:GradeA,BeX42aX70:+10%-3,5% GrauA25:+10%-5%PerLot:GradeA,BeX42aX70:-1,75% GrauA25:-3,5%
Lisas Chanfradas: ≥ 1’’ (33,40 mm) Roscas e Luvas conforme API Std 5B: 60,3 mm (2’’) a 355,6 mm (14’’)
Plain Beveled: ≥ 1’’ (33,40 mm) Threads and couplings as per API Std 5B: 60,3 mm (2’’) a 355,6 mm (14’’)
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste hidrostático de acordo com a bitola e o aço.In addition to technological and physical testing, each pipe undergoes a specified hydrostatic test according to size, range and steel type.
5 - TOLERâNCIAS / TOLERANCES
4 - ACABAmENTO DE PONTAS / END FINIShINg
6 - ENSAIOS E TESTES / TESTINg
p.26 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
grauGrade
Limite de escoamentoYield strength
Resistência à traçãoTensile strength
(mín.) psi mPa
(máx.) psi mPa
(mín.) psi mPa
(máx.) psi mPa
BN 35.500 245 65.300 (a) 450 60.200 415 95.000 655
X42N 42.100 290 71.800 495 60.200 415 95.000 655
X46N 46.400 320 76.100 525 63.100 435 95.000 655
X52N 52.200 360 76.900 530 66.700 460 110.200 760
X56N 56.600 390 79.000 545 71.100 490 110.200 760
X60Q 60.200 415 81.900 565 75.400 520 110.200 760
X65Q 65.300 450 87.000 600 77.600 535 110.200 760
X70Q 70.300 485 92.100 635 82.700 570 110.200 760
X80Q 80.500 555 102.300 705 90.600 625 119.700 825
Obs.: a) Carbono Equivalente máximo: Valores para paredes até 25,0 mm e até grau X70. Paredes acima e grau X80 mediante acordo
Obs.: a) Maximum carbon equivalent: Values for wall thickness up to 25,0 mm and up to grade X70. Wall thickness above and grade X80 upon previous agreement
b) Para cada 0,01% de redução sobre o carbono máximo especificado, é permitido um acréscimo de 0,05% sobre o manganês máximo especificado, até um máximo de 1,65% para os graus B até X52, até 1,75% para os graus X56 até X65 e até 2,00% para os graus X70 e X80
c) Salvo acordado de outra forma a soma de Nb + V ≤ 0,06% d) A soma de Nb + V + Ti ≤ 0,15% e) Salvo acordado de outra forma: Cu ≤ 0,50%; Ni ≤ 0,30%; Cr ≤ 0,30% e Mo ≤ 0,15% f) Salvo acordado de outra forma g) Salvo acordado de outra forma a soma de Nb + V + Ti ≤ 0,15% h) Salvo acordado de outra forma: Cu ≤ 0,50%; Ni ≤ 0,50%; Cr ≤ 0,50% e Mo ≤ 0,50% i) Salvo acordado de outra forma: Cu ≤ 0,50%; Ni ≤ 1,00%; Cr ≤ 0,50% e Mo ≤ 0,50% j) B ≤ 0,004%
b) Each 0,01% reduction in maximum specified carbon, allow a 0,05% increase in maximum specified manganese up to a limit of 1,65% for gradess B to X52, up to 1,75% for grades X56 up to X65 and up to 2,00% for grades X70 and X80
c) If not agreed differently the sum of Nb + V ≤ 0,06% d)The sum of Nb + V + Ti ≤ 0,15% e) If not agreed differentlya: Cu ≤ 0,50%; Ni ≤ 0,30%; Cr ≤ 0,30% e Mo ≤ 0,15% f) unless otherwise agreed g) Unless otherwise agreed the sum Nb + V + Ti ≤ 0,15% h) Unless otherwise agreed: Cu ≤ 0,50%; Ni ≤ 0,50%; Cr ≤ 0,50% e Mo ≤ 0,50% i)Unless otherwise agreed: Cu ≤ 0,50%; Ni ≤ 1,00%; Cr ≤ 0,50% e Mo ≤ 0,50% j) B ≤ 0,004%
Obs.: Alongamento conforme a norma a) Para tubos com D < 219,1mm o limite de escoamento máximo será 495 MPa (71.800 psi)
Obs.: Elongation as per standard a) For tubes with D < 219,1mm maximum yield strength will be 495 MPa (71.800 psi)
API 5L - LINE PIPE - PSL2
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
grauGrade
C (máx.)
Si (máx.)
mn(máx.)
P(máx.)
S(máx.)
V(máx.)
Nb(máx.)
Ti(máx.)
OutrosOthers
BN 0,24 0,40 1,20 0,025 0,015 c c 0,040 e
X42N 0,24 0,40 1,20 0,025 0,015 0,06 0,05 0,040 e
X46N 0,24 0,40 1,40 0,025 0,015 0,07 0,05 0,040 d, e
X52N 0,24 0,45 1,40 0,025 0,015 0,10 0,05 0,040 d, e
X56N 0,24 0,45 1,40 0,025 0,015 0,10 f 0,05 0,040 d, e
X60Q/X65Q 0,18 f 0,45 1,70 0,025 0,015 g g g h
X70Q 0,18 f 0,45 1,80 0,025 0,015 g g g h
X80Q 0,18 f 0,45 1,90 0,025 0,015 g g g i, j
CE (Pcm) ≤ 0,25% para percentual de Carbono ≤ 0,12%, calculado usando a fórmula: CE (IIW) ≤ 0,43% para percentual de Carbono > 0,12%, calculado usando a fórmula:
CE (Pcm) = C+ Si + Mn+ Cu+ Ni+ Cr+ Mo+ V+ 5B 30 20 20 60 20 15 10 CE (IIW) = C+ Mn+ (Cr + Mo + V) + (Ni + Cu) 6 5 15
CE (Pcm) ≤ 0,25% for carbon content < 0,12%, calculated through the formula: CE (IIW) ≤ 0,43% for carbon content > 0,12%, calculated through the formula:
CE (Pcm) = C+ Si + Mn+ Cu+ Ni+ Cr+ Mo+ V+ 5B 30 20 20 60 20 15 10 CE (IIW) = C+ Mn+ (Cr + Mo + V) + (Ni + Cu) 6 5 15
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.27
3 - COmPRImENTOS / LENgTh
Lisas Chanfradas: ≥ 1’’ (33,4 mm) Roscas e luva
Plain Beveled: ≥ 1’’ (33,4 mm) Threads and couplings
4 - ACABAmENTO DE PONTAS / END FINIShINg
5 - TOLERâNCIAS / TOLERANCES
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste hidrostático de acordo com a bitola e o aço e também a um teste não destrutivo conforme norma API 5L. Para PSL2 também são executados ensaios de impacto para as dimensões de tubos previstas na norma.
In addition to technological and physical testing each pipe undergoes a hydrostatic test according to its size and steel type as well as NDT as per API 5L. For PSL2 Impact tests are also carried out for dimensions as specified by standard.
6 - ENSAIOS E TESTES / TESTINg
Conforme tabela 11 da Norma API 5L
According to table 11 of the standard API 5L
6m (20 pés): 2,74 a 6,86m (9,0 a 22,4 pés), com média mínima de 5,33m (17,5 pés)12m (40 pés): 4,27 a 13,72m (14,0 a 45,0 pés), com média mínina de 10,67m (35,0 pés)
6m(20ft): 2,74to6,86m(9,0to22,5ft),withminimumaverageof5,33m(17,5ft)12m(40ft): 4,27to13,72m(14,0to45,0ft),withminimumaverageof10,67m(35,0ft)
FabricaçãoStandard manufacturing lengths
4 a 8 metros ou 8 a 13 metros4to8metersor8to13meters
Fixos ou FaixasOther lengths or ranges
Mediante consultauponrequest
Diâmetro ExternoOutside diameter
Até 48,3 mm (1.9’’): + 0,40 mm (+0.016’’) - 0,80 mm (- 0.031’’)60,3mm (2.3/8’’) e maior: +/- 0,75%
Upto48,3mm(1.9’’):+0,40mm(+0.016’’)-0,80mm(-0.031’’)60,3mm(2.3/8’’)andlarger:+/-0,75%
Espessura de ParedeWall thickness
≤ 4,0mm (0.157’’): + 0,6mm (0.024’’) - 0,5mm (0.020’’) > 4,0mm (0.157’’) a < 25,0mm (0.984’’): + 15% - 12,5%≥ 25,0mm (0.984’’): + 3,7mm (0.146’’) ou + 10% o que for maior - 3,0mm (0.120’’) ou - 10% o que for maior ≤4,0mm(0.157’’):+0,6mm(0.024’’)-0,5mm(0.020’’)>4,0mm(0.157’’)a<25,0mm(0.984’’):+15%-12,5%≥25,0mm(0.984’’):+3,7mm(0.146’’)or+10%Whicheveristhegrater-3,0mm(0.120’’)or-10%Whicheveristhegrater
PesoWeight
Por Tubo: + 10% - 3,5%Por Lote: -1,75%
PerTube:+10%-3,5% PerLot:-1,75%
p.28 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Categorias de testes da norma API 5L - gRAu BCategories of tests for standard API 5L - Grade B
Item PSL1 PSL2
Descrição do açoSteel description
Sem informação adicional: Ex: GRAU B Noadditionalinformation:Ex:GRAUB
Adiciona na nomenclatura do aço o estado de fornecimento: Por exemplo: GRAU BN - indicando que
o estado de fornecimento do tubo é normalizado Addtothenameofthesteelthestateofsupply:
Example:GRAUBN-indicatesthethestateinwhichtubewassuppliedisnormalized
Composição químicaChemical composition
C ≤ 0,28 % C ≤ 0,24 %
P ≤ 0,030% P ≤ 0,025%
S ≤ 0,030% S ≤ 0,015%
Carbono equivalente ou PCM não são requeridos EquivalentCarbonorPCMarenotrequired
Carbono equivalente ou PCM são requeridos EquivalentCarbonorPCMarerequired
Estado de fornecimentoState of supply
Laminado à quente Hotrolled
Normalizado Normalized
Acabamento de pontaEnd finishing
Ponta lisa, chanfrada ou com rosca e luva Plainend,beveledorwiththreadandcouplings
Ponta lisa ou chanfrada Plainorbeveledends
Propriedade mecânicaMechanical properties
Limite de escomaneto somente com limite mínimo Yieldstrengthonlywithminimumstrength
Limite de escomaneto com limites mínimos e máximos Yieldstrengthwithminimumandmaximumlimits
Resistência à tração somente com limite mínimo Tensilestrengthwithminimumlimit
Resistência à tração com limites mínimos e máximos Tensilestrengthwithminimumandmaximumlimits
Sem exigência de ensaio de impacto Impacttestingnotrequired
Com exigência de ensaio de impacto, aplicável de acordo com a dimensão do tubo
Requiredimpacttesting,applicableaccordingtotubedimensions
NDT (testes não destrutivos) NDT (non destructive testing)
Aplicado somente quando especificado pelo cliente Applicableonlywhenspecifiedbytheclient
Requisito obrigatório conforme critério de aceitação da norma
Mandatoryrequisiteaccordingtostandardaccetancecriteria
Outras informações gerais para comparação: Other general information for comparing:
graus de aço Steel grades
A25 até X70 A25uptoX70
BN até X80Q BNuptoX80Q
ANEXO B - mPQ Attachment B - MPQ
Não aplicável Doesnotapply
Aplicável se requerido Applicableonrequest
ANEXO E - NDT Attachment E - NDT
Aplicado somente quando especificado pelo cliente Applicableonlywhenspecifiedbytheclient
Requisito obrigatório conforme critério de aceitação da norma
Mandatoryrequisitaccordingtostandardacceptancecriteria
ANEXO F - Luva Attachment F - Luva
Aplicável para tubos com rosca e luva Applicablefortubeswiththreadandcouplings
Não aplicável Doesnotapply
ANEXO g - Ductilidade Attachment G - Ductilidade
Não aplicávelDoesnotapply
Aplicável se requerido Applicableonrequest
ANEXO h - Sour Service Attachment H - Sour Service
Não aplicável Doesnotapply
Aplicável se requerido Applicableonrequest
ANEXO J - Offshore Service Attachment J - Offshore Service
Não aplicável Doesnotapply
Aplicável se requerido Applicableonrequest
ANEXO K - NDT para Offshore Service e Sour Service
Attachment K - NDT for Offshore Service and Sour Service
Não aplicável Doesnotapply
Aplicável se requeridoApplicableonrequest
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.29
Obs.: 1) Para cada 0,01% de redução sobre o carbono máximo especificado, é permitido um acréscimo de 0,05% sobre o manganês máximo especificado, até um máximo
acréscimo de 0,20% 2) Al total ≤ 0,060%; N ≤ 0,012%; Al/N ≥ 2:1 3) e 4) PCM% e CE% são calculados usando a mesma fórmula da API 5L 5) A soma de Nb + V ≤ 0,06% 6) A soma de Nb + V + Ti ≤ 0,15% 7) Cu ≤ 0,35%; Ni ≤ 0,30%; Cr ≤ 0,30%; Mo ≤ 0,10%; B ≤ 0,0005% 8) Para tubos de aço sem costura o PCM poderá ser acrescido até 0,03%, mas sem exceder 0,25% 9) Cu ≤ 0,50%; Ni ≤ 0,50%; Cr ≤ 0,50%; Mo ≤ 0,50%; B ≤ 0,0005%
Obs.:1) For every 0,01% of reduction on maximum specified carbono, 0,05% increase in maximum manganese is allowed up to a maximum increase of 0,20%2) Total Al ≤ 0,060%; N ≤ 0,012%; Al/N ≥ 2:1 3) e 4) PCM% and CE% are calculated using the same API 5L formula 5) The sum of Nb + V ≤ 0,06% 6) The sum of Nb + V + Ti ≤ 0,15% 7) Cu ≤ 0,35%; Ni ≤ 0,30%; Cr ≤ 0,30%; Mo ≤ 0,10%; B ≤ 0,0005% 8) For seamless steel tubes PCM can be increased up to 0,03%, but not exceeding 0,25% 9) Cu ≤ 0,50%; Ni ≤ 0,50%; Cr ≤ 0,50%; Mo ≤ 0,50%; B ≤ 0,0005%
DNV OS F101 - SECTION 7
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
grau Grade
C 1) (máx.)
Si (máx.)
mn 1) (máx.)
P(máx.)
S(máx.)
V(máx.)
Nb(máx.)
Ti(máx.)
Outros Others
CE 3) PCm 4)
NormalizadoNormalized
DNV 245 0,14 0,40 1,35 0,020 0,010 5) 5) 0,04 6,7) 0,36 0,19 8)
DNV 290 0,14 0,40 1,35 0,020 0,010 0,05 0,05 0,04 7) 0,36 0,19 8)
DNV 320 0,14 0,40 1,40 0,020 0,010 0,07 0,05 0,04 6,7) 0,38 0,20 8)
DNV 360 0,16 0,45 1,65 0,020 0,010 0,10 0,05 0,04 6) 0,43 0,22 8)
Temperado e RevenidoQuench and Tempered
DNV 360 0,16 0,45 1,65 0,020 0,010 0,07 0,05 0,04 6,9) 0,39 0,20 8)
DNV 390 0,16 0,45 1,65 0,020 0,010 0,07 0,05 0,04 6,9) 0,40 0,21 8)
DNV 415 0,16 0,45 1,65 0,020 0,010 0,08 0,05 0,04 6,9) 0,41 0,22 8)
DNV 450 0,16 0,45 1,65 0,020 0,010 0,09 0,05 0,06 6,9) 0,42 0,22 8)
DNV 485 0,17 0,45 1,75 0,020 0,010 0,10 0,05 0,06 6,9) 0,42 0,23 8)
DNV 555 0,17 0,45 1,85 0,020 0,010 0,10 0,06 0,06 6,9) As agreed
grauGrade
Limite de escoamentoYield strength
Resistência a Tração Tensile strength
DurezaHardness
ImpactoImpact
(mín.) (máx.) (mín.) (máx.) (máx.) average mín.
mPa mPa mPa mPa hV10 joules joules
DNV 245 245 450 1) 415 760 270 27 22
DNV 290 290 495 415 760 270 30 24
DNV 320 320 520 435 760 270 32 27
DNV 360 360 525 460 760 270 36 30
DNV 390 390 540 490 760 270 39 33
DNV 415 415 565 520 760 270 42 35
DNV 450 450 570 535 760 270 45 38
DNV 485 485 605 570 760 300 50 40
DNV 555 555 675 625 825 300 56 45
Obs.: Le/Rt ≤0.93 1) Para tubos com D < 219,1mm o limite de escoamento máximo será 495 MPa
Obs.: Le/Rt ≤0.93 1) For tubes with D < 219,1mm maximum yield stength will be 495 MPa
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
Tubos de aço Sem costura para aplicação offshore e outros FinsSeamless Steel Pipes for Offshore Applications and Others Purpose
p.30 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Fixos ou FaixasFix and randon
Mediante consultauponrequest
3 - COmPRImENTOS / LENgThS
Lisas ou faceada Chanfradas
Plain or faced endBeveled
4 - ACABAmENTO DAS PONTAS (*) / END FINIShINg (*)
Diâmetro ExternoOuter Diameter
Corpo: ± 0,5mm ou ± 0.0075 D prevalecendo o maior valor Ponta: ± 0,5mm ou ± 0.005 D prevalecendo o maior valor, limitado em +/-1,6 mm Body:±0,5mmou±0.0075Dhighestvalueconsidered End:±0,5mmou±0.005Dhighestvalueconsidered,limitedin+/-1,6mm
Espessura de ParedeWall thickness
< 4,0mm: + 0,6mm - 0,5mm ≥ 4,0mm a < 10,0 mm: + 15% - 12,5% ≥ 10,0 mm a < 25,0 mm: + 12,5% - 12,5% ≥ 25,0mm : + 3,7mm ou + 10,0% prevalecendo o maior valor - 3,0mm ou - 10,0% prevalecendo o maior valor <4,0mm:+0,6mm -0,5mm ≥4,0mma<10,0mm:+15% -12,5% ≥10,0mma<25,0mm:+12,5% -12,5% ≥25,0mm:+3,7mmou+10,0%highestvalueconsidered -3,0mmou-10,0%highestvalueconsidered
PesoWeight
Por Tubo: + 10% - 3,5%Por Lote: -1,75% PerTube:+10%-3,5%PerLot:-1,75%
5 - TOLERâNCIAS (*) / TOLERANCES (*)
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste hidrostático de acordo com a bitola, aço e também a um teste não destrutivo.
De acordo com as exigências da aplicação e do lançamento dos tubos durante a instalação e funcionamento do Linepipe.
De acordo com o especificicado pelos clientes para projetos Line Pipe.
According to that specified by the clients for projects Line Pipe.
In addition to technological and physical testing each pipe undergoes a hydrostatic test according to its size and steel type as well as NDT.
According to the application demands and launch of the tubes during the installation and functioning of the Linepipe.
6 - ENSAIOS E TESTES (*) / TESTINg (*)
7 - REQuISITOS SuPLEmENTARES (*) / SuPPLEmENTARy REQuIREmENT (*)
8 - DImENSÕES DE FORNECImENTO (*) / SuPPLy DImENSIONS (*)
(*) Mediante Consulta / (*) Upon request
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.31
AplicaçãoApplication
API-5L / PSL1 ASTm A 106 NBR 6321 Tri-Norma
Tubos com ou sem costura, para uso em Oleodutos, Gasodutos e outros fins.
Weldedorseamlesspipes,foruseinoilducts,gasductsand
otherpurposes.
Tubos sem costura, para temperaturas elevadas. O
aço-carbono deverá ser sempre acalmado com silício e alumínio.
Seamlesspipes,forhightempera-tures.Thecarbonsteelwillbefullykilledwithaluminiumandsilicon.
Tubo de aço sem solda longitudinal para serviços em
altas temperaturas.Seamlesspipeforhightemperatureservices.
Tubos que atendem as Normas ASTM A 106/NBR 6321 e
API 5L. Exclusivo para Tubos Sem Costura.
TubesthatmeettheASTMA106/NBR6321eAPI5Lstandards.Exclusiveforseamlesstubes.
Tolerâncias - Ex: 168,3 x 7,11 mmTolerances - Ex: 168,3 x 7,11 mm
Diâmetro Externo(168,3 mm)
Outer Diameter(168,3 mm)
+/- 1,26 mm - 0,80 mm / + 1,60 mm - 0,80 mm / + 1,60 mm - 0,80 mm / + 1,26 mm
ParedeWall Thickness
- 12,5% / + 15% -12,50% -12,50% - 12,5% / + 15%
Composição química (gr.B)Chemical composition (Gr.B)
C Máx. 0,28 Máx. 0,30 Máx. 0,30 Máx. 0,28
mn Máx. 1,20 (1) 0,29 – 1,06 (1) 0,29 – 1,06 (1) 0,29 – 1,06 (1)
P Máx. 0,030 Máx. 0,035 Máx. 0,035 Máx. 0,030
S Máx. 0,030 Máx. 0,035 Máx. 0,035 Máx. 0,030
Si - Min. 0,10 Min. 0,10 Min. 0,10
Cr Máx. 0,50 Máx. 0,40 Máx. 0,40 Máx. 0,40
Cu Máx. 0,50 Máx. 0,40 Máx. 0,40 Máx. 0,40
mo Máx. 0,15 Máx. 0,15 Máx. 0,15 Máx. 0,15
Ni Máx. 0,50 Máx. 0,40 Máx. 0,40 Máx. 0,40
V (2) Máx. 0,08 Máx. 0,08 (2)
TuBOS FABRICADOS Em TRI-NORmA - AÇO gRAu BTRI-STANDARD mANuFACTuRED PIPES - gRADE B STEEL
Os tubos fabricados em Tri-Norma, aço grau B, foram desenvolvidos pela Vallourec, exclusivamente para tubos sem costura, para atender as normas ASTm A 106/NBR 6321 e API 5L, simultaneamente, mantendo o nível de qualidade e garantindo as especificações técnicas de cada norma (composição química, propriedades mecânicas e tolerâncias dimensionais), conforme tabela abaixo:
The tubes manufactured in grade Tri-Norma, steel grade B, were developed by Vallourec, exclusively for seamless, to meet ASTm A 106/NBR 6321 e API 5L standards, simultaneaously, maintaining quality level and guaranteeing the technical specification of each norm (chemical composition, mechanical properties and dimensional tolerances), See table below:
Obs.: (1) Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, até 1,65% (2) Salvo acordado de outra forma a soma de Nb + V ≤ 0,06% e Nb + V + Ti ≤ 0,15%
Obs.: (1) For every 0,01% of reduction on maximum specified carbon, a 0,06% increas on the maximum specified manganese is allowed, up to 1,65%(2) Except when otherwise agreed the sum Nb + V ≤ 0,06% e Nb + V + Ti ≤ 0,15%
Propriedades mecânicas (gr.B): Mechanical properties (Gr.B):
Limite de Escoamento, min.Yield Strength, min.
psi 35.500 35.000 35.000 35.500
MPa 245 240 240 245
Resistência à Tração, min.Tensile Strength, min.
psi 60.200 60.000 60.000 60.200
MPa 415 415 415 415
COmPRImENTO / LENgTh
Fabricação – 4 a 8 metros ou 8 a 13 metrosFixo ou Faixas: Mediante Consulta
Manufacturing – 4 to 8 meters or 8 to 13metersOther fixed lengths or ranges: Upon request
Tubos de aço Sem costura para condução de produtos petrolíferos e outros FinsSeamless Steel Pipes for the Conveyance of Oil Products and Other Purposes
p.32 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
LisasChanfradas: ≥ 1” (33,4 mm)
A norma ASTM A 106 prevê este teste para tubos até 2’’. A norma API 5L não prevê este teste. Para os tubos Bi-Norma este teste é efetuado até 2’’. Acima deste diâmetro, o teste tecnológico não é previsto em nenhuma das duas normas.
Standard ASTM A 106 requires this test for pipes up to 2’’.The API 5Lstandard does not require this test. For pipes Bi-Standard this test is made for up to 2’’. Above this diameter, the technological test is not required in neither standard.
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste hidrostático de acordo com a bitola.
PlainBeveled: ≥ 1” (33,4 mm)
In addition to technological and physical testing each pipe undergoes a hydrostatic test according to its size and steel type.
ACABAmENTO DE PONTAS / END FINIShINg
TESTE TECNOLógICO: DOBRAmENTO / TEChNOLOgICAL TESTINg: BENDINg
ENSAIOS E TESTES / TESTINg
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.33
DImENSÕES LINE PIPE - API 5L E TRI-NORmA
LINE PIPE DImENSIONS - API 5L AND TRI-STANDARD
Diâmetro externoOuter Diameter
Espessura de parede Wall Thickness
Peso Weight
Comprimento Length
pol mm pol mm kg/m 20 pés 40 pés
0.540 13,70.088 2,20 0,62 x x
0.119 3,00 0,79 x x
0.675 17,10.091 2,30 0,84 x x
0.126 3,20 1,10 x x
0.840 21,3
0.095 2,40 1,12 x x
0.109 2,80 1,28 x x
0.147 3,70 1,61 x x
0.188 4,80 1,95 x x
1.050 26,70.113 2,90 1,70 x x
0.154 3,90 2,19 x x
1.315 33,40.133 3,40 2,52 x x
0.179 4,50 3,21 x x
1.660 42,2
0.140 3,60 3,43 x x
0.191 4,90 4,51 x x
0.382 9,70 7,77 x x
1.900 48,3
0.145 3,70 4,07 x x
0.200 5,10 5,43 x x
0.400 10,20 9,58 x x
2 3/8 60,3
0.125 3,20 4,51 x x
0.141 3,60 5,03 x x
0.154 3,90 5,42 x x
0.172 4,40 6,07 x x
0.188 4,80 6,57 x x
0.218 5,50 7,43 x x
0.250 6,40 8,51 x x
0.281 7,10 9,31 x x
0.436 11,10 13,47 x x
2 7/8 73,0
0.141 3,60 6,16 x x
0.156 4,00 6,81 x x
0.172 4,40 7,44 x x
0.188 4,80 8,07 x x
0.203 5,20 8,69 x x
0.216 5,50 9,16 x x
0.250 6,40 10,51 x x
0.276 7,00 11,39 x x
0.552 14,00 20,37 x x
3 1/2 88,9
0.141 3,60 7,57 x x
0.156 4,00 8,37 x x
0.172 4,40 9,17 x x
0.188 4,80 9,95 x x
0.216 5,50 11,31 x x
0.250 6,40 13,02 x x
0.281 7,10 14,32 x x
0.300 7,60 15,24 x x
0.600 15,20 27,63 x x
4 101,6
0.141 3,60 8,70 x x
0.156 4,00 9,63 x x
0.172 4,40 10,55 x x
0.188 4,80 11,46 x x
0.226 5,70 13,48 x x
0.250 6,40 15,02 x x
0.281 7,10 16,55 x x
0.318 8,10 18,68 x x
Diâmetro / paredes fornecidos como trefilados a frio.Nota: Outros diâmetros / paredes poderão ser fabricados mediante consulta.
Diameter / wall thickness supplied as cold drawn.Note: Other Diameters / Wall thicknessescan be manufactured upon request.
p.34 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
DImENSÕES LINE PIPE - API 5L E TRI-NORmA
LINE PIPE DImENSIONS - API 5L AND TRI-STANDARD
Diâmetro externoOuter Diameter
Espessura de parede Wall Thickness
Peso Weight
Comprimento Length
pol mm pol mm kg/m 20 pés 40 pés
4 1/2 114,3
0.156 4,00 10,88 x x
0.172 4,40 11,92 x x
0.188 4,80 12,96 x x
0.203 5,20 13,99 x x
0.219 5,60 15,01 x x
0.237 6,00 16,02 x x
0.250 6,40 17,03 x x
0.281 7,10 18,77 x x
0.312 7,90 20,73 x x
0.337 8,60 22,42 x x
0.438 11,10 28,25 x x
0.531 13,50 33,56 x x
0.674 17,10 40,99 x x
5 9/16 141,3
0.188 4,80 16,16 x x
0.219 5,60 18,74 x x
0.258 6,60 21,92 x x
0.281 7,10 23,50 x x
0.312 7,90 25,99 x x
0.344 8,70 28,45 x x
0.375 9,50 30,88 x x
0.500 12,70 40,28 x x
0.625 15,90 49,17 x x
0.750 19,10 57,56 x x
6 5/8 168,3
0.188 4,80 19,35 x x
0.203 5,20 20,91 x x
0.219 5,60 22,47 x x
0.250 6,40 25,55 x x
0.280 7,10 28,22 x x
0.312 7,90 31,25 x x
0.344 8,70 34,24 x x
0.375 9,50 37,20 x x
0.432 11,00 42,67 x x
0.500 12,70 48,73 x x
0.562 14,30 54,31 x x
0.625 15,90 59,76 x x
0.719 18,30 67,69 x x
0.750 19,10 70,27 x x
0.864 21,90 79,06 x x
0.875 22,20 79,98 x x
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.35
DImENSÕES LINE PIPE - API 5L E TRI-NORmA
LINE PIPE DImENSIONS - API 5L AND TRI-STANDARD
Diâmetro externoOuter Diameter
Espessura de parede Wall Thickness
Peso Weight
Comprimento Length
pol mm pol mm kg/m 20 pés 40 pés
8 5/8 219,1
0.250 6,40 33,57 x x
0.277 7,00 36,61 x x
0.312 7,90 41,14 x x
0.322 8,20 42,65 x x
0.344 8,70 45,14 x x
0.375 9,50 49,10 x x
0.438 11,10 56,94 x x
0.500 12,70 64,64 x x
0.562 14,30 72,22 x x
0.625 15,90 79,67 x x
0.719 18,30 90,62 x x
0.750 19,10 94,20 x x
0.812 20,60 100,84 x x
0.875 22,20 107,79 x x
1.000 25,40 121,33 x x
1.260 32,00 147,64 x X
10 3/4 273,1
0.250 6,40 42,09 x x
0.279 7,10 46,57 x x
0.307 7,80 51,03 x x
0.344 8,70 56,72 x x
0.365 9,30 60,50 x x
0.438 11,10 71,72 x x
0.500 12,70 81,55 x x
0.562 14,30 91,26 x x
0.625 15,90 100,85 x x
0.719 18,30 114,99 x x
0.812 20,60 128,27 x x
0.875 22,20 137,36 x x
0.938 23,80 146,32 x x
1.000 25,40 155,15 x x
12 3/4 323,9
0.250 6,40 50,11 x x
0.281 7,10 55,47 x x
0.312 7,90 61,56 x x
0.330 8,40 65,35 x x
0.344 8,70 67,62 x x
0.375 9,50 73,65 x x
0.406 10,30 79,65 x x
0.438 11,10 85,62 x x
0.500 12,70 97,46 x x
0.562 14,30 109,18 x x
0.625 15,90 120,76 x x
0.688 17,50 132,23 x x
0.750 19,10 143,56 x x
0.812 20,60 154,08 x x
0.875 22,20 165,17 x x
0.938 23,80 176,13 x
1.000 25,40 186,97 x
1.062 27,00 197,68 x
1.125 28,60 208,27 x
p.36 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
DImENSÕES LINE PIPE - API 5L E TRI-NORmA
LINE PIPE DImENSIONS - API 5L AND TRI-STANDARD
Nota: Outros diâmetros / paredes poderão ser fabricados mediante consulta. Note: other diameters / Wall thicknessescan be manufactured upon request.
Mass Calculation: m= 0,02466*e*(D-e) where:m = theoretical mass (kg/m)e = wall thickness (mm)D = outer diameter (mm)
cálculo Massa: m= 0,02466*e*(d-e) onde:m = massa teórica (kg/m)e = espessura de parede (mm)d = diâmetro externo (mm)
Diâmetro externoOuter Diameter
Espessura de parede Wall Thickness
Peso Weight
Comprimento Length
pol mm pol mm kg/m 20 pés 40 pés
14 355,6
0.312 7,90 67,74 x x
0.344 8,70 74,42 x x
0.375 9,50 81,08 x x
0.406 10,30 87,71 x x
0.438 11,10 94,30 x x
0.469 11,90 100,86 x x
0.500 12,70 107,39 x x
0.562 14,30 120,36 x x
0.625 15,90 133,19 x x
0.688 17,50 145,91 x x
0.750 19,10 158,49 x x
0.812 20,60 170,18 x
0.875 22,20 182,52 x
0.938 23,80 194,74 x
1.000 25,40 206,83 x
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.37
ASTM A 53 • CoM requiSiToS de quAlidAde
ASTM A 53 • WiTh quAliTy requireMenTS
grauGrade
Limite de Escoamento - mín.Yield Strength - mín.
Resistência à Tração - mín.Tensile Stength - mín.
psi mPa psi mPa
A 30.000 205 48.000 330
B 35.000 240 60.000 415
Diâmetro ExternoOuter diameter
Até 1.1/2’’ (48,3 mm) +/- 0,4mmA partir de 2’’ (60,3 mm) +/- 1%
Upto1.1/2’’(48,3mm)+/-0,4mmFrom2’’(60,3mm)+/-1%
Espessura de paredeWall thickness
A espessura de parede mínima não estará em nenhum ponto mais que 12,5% abaixo da espessura de parede nominal especificada
Theminimumwallthicknesswillnotbeatanypointmorethan12,5%belowthespecifiednominalwallthickness
PesoWeight
(+/-) 10%
Single random lengths De 4,88 a 6,71m com até 5% de 3,66 a 4,88m
From4,88to6,71mwithupto5%from3,66to4,88m
Double random lengthsMédia mínima de 10,67m e comprimento mínimo de 6,71mMinimumaverageof10,67mandminimumlengthof6,71m
FabricaçãoStandard Manufacturing lengths
4 a 8m ou 8 a 13 m4to8mor8to13m
Fixos ou FaixasOther fixed lengths or ranges
Mediante ConsultaUponrequest
ObservaçãoNote
Não poderão ser fornecidos tubos em ‘‘double random lengths’’ para bitola 10’’ e parede ≥ 28,58 mm, para bitola 12’’ e parede ≥ 23,83 mm de 14’’ e parede ≥ 20,62mm
‘‘doublerandomlengths’’tubescannotbesuppliedforOD10’’andwallthickness≥ 28,58mm,forOD12’’andwallthickness≥ 23,83mmandforOD14’’andwallthickness≥ 20,62mm
grauGrades
C (máx.)
mn. (máx.)
P (máx.)
S (máx.)
Cr (máx.)
Cu (máx.)
mo (máx.)
Ni (máx.)
V (máx.)
A 0,25 0,95 0,05 0,045 0,40 0,40 0,15 0,40 0,08
B 0,30 1,20 0,05 0,045 0,40 0,40 0,15 0,40 0,08
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
3 - COmPRImENTOS / LENgTh
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
5 - TOLERâNCIAS / TOLERANCES
Obs.: Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, até um máximo de 1,35%
Obs.: Alongamento conforme a normaObs.:Elongation according to standard
Obs.: For every 0,01% on maximum specified Carbon reduced, 0,06% increase in the maximum specified manganese is allowed up to a maximum of 1,35%
LisasChanfradas: ≥ 1” (33,4 mm) Rosca
Plain Beveled: > 1’’ (33,4 mm) Thread
4 - ACABAmENTO DE PONTAS / END FINIShINg
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste elétrico não destrutivo ou hidrostático de acordo com a bitola e o aço.In addition to technological and physical testing each pipe undergoes a hydrostatic test or NDT according to its size and steel.
6 - ENSAIOS E TESTES / TESTINg
NOTA: Conforme regulamentação do Inmetro, esta norma não pode ser comercializada no mercado brasileiro. Neste mercado, para o tipo de aplicação, somente poderá ser comercializado material na norma NBR 5590 devidamente certificado.
NOTE: According to Inmetro regulation, this standard cannot be commercialized in the Brazilian market.In this market, for this kind of application, only duely certified material in the NBR 5590 standard can be commercialized.
Tubos de aço Sem costura para condução de Fluidos e outros FinsSeamless Steel Pipes for Fluid Conveyance and Others Purposes
p.38 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
nBr 5590 • CoM requiSiToS de quAlidAde
nBr 5590 • WiTh quAliTy requireMenTS
NOTA: Material em conformidade com os requisitos de regulamentação e devidamente certificado pelo Inmetro.
NOTE: Material in accordance with regulation requisites and duely certified by Inmetro.
grauGrade
Limite de Escoamento - mín.Yield Strength - mín.
Resistência à Tração - mín.Tensile Stength - mín.
psi mPa psi mPa
A 30.000 205 48.000 330
B 35.000 240 60.000 415
Diâmetro ExternoOuter diameter
Até 1.1/2’’ (48,3 mm) +/- 0,4mmA partir de 2’’ (60,3 mm) +/- 1%
Upto1.1/2’’(48,3mm)+/-0,4mmFrom2’’(60,3mm)+/-1%
Espessura de paredeWall thickness
A espessura de parede mínima não estará em nenhum ponto mais que 12,5% abaixo da espessura de parede nominal especificada
Theminimumwallthicknesswillnotbeatanypointmorethan12,5%belowthespecifiednominalwallthickness
PesoWeight
(+/-) 10%
Single random lengths De 4,88 a 6,71m com até 5% de 3,66 a 4,88m
From4,88to6,71mwithupto5%from3,66to4,88m
Double random lengthsMédia mínima de 10,67m e comprimento mínimo de 6,71mMinimumaverageof10,67mandminimumlengthof6,71m
FabricaçãoStandard Manufacturing lengths
4 a 8m ou 8 a 13 m4to8mor8to13m
Fixos ou FaixasOther fixed lengths or ranges
Mediante ConsultaUponrequest
ObservaçãoNote
Não poderão ser fornecidos tubos em ‘‘double random lengths’’ para bitola 10’’ e parede ≥ 28,58 mm, para bitola 12’’ e parede ≥ 23,83 mm de 14’’ e parede ≥ 20,62mm
‘‘doublerandomlengths’’tubescannotbesuppliedforOD10’’andwallthickness≥ 28,58mm,forOD12’’andwallthickness≥ 23,83mmandforOD14’’andwallthickness≥ 20,62mm
grauGrades
C (máx.)
mn. (máx.)
P (máx.)
S (máx.)
Cr (máx.)
Cu (máx.)
mo (máx.)
Ni (máx.)
V (máx.)
A 0,25 0,95 0,05 0,045 0,40 0,40 0,15 0,40 0,08
B 0,30 1,20 0,05 0,045 0,40 0,40 0,15 0,40 0,08
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
3 - COmPRImENTOS / LENgTh
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
5 - TOLERâNCIAS / TOLERANCES
Obs.: Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, até um máximo de 1,35%
Obs.: Alongamento conforme a normaObs.: Elongation according to standard
Obs.: For every 0,01% on maximum specified Carbon reduced, 0,06% increase in the maximum specified manganese is allowed up to a maximum of 1,35%
LisasChanfradas: ≥ 1” (33,4 mm) Rosca
Plain Beveled: > 1’’ (33,4 mm) Thread
4 - ACABAmENTO DE PONTAS / END FINIShINg
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste elétrico não destrutivo ou hidrostático de acordo com a bitola e o aço.
In addition to technological and physical testing each pipe undergoes a hydrostatic test or NDT according to its size and steel.
6 - ENSAIOS E TESTES / TESTINg
Tubos de aço Sem costura para condução de Fluidos e outros FinsSeamless Steel Pipes for Fluid Conveyance and Others Purposes
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.39
ASTM A 106 • PArA AlTAS TeMPerATurAS / ASTM A 106 • For high TeMPerATureS
grauGrade
Limite de Escoamento - mín.Yield Strength - mín.
Resistência à Tração - mín.Tensile Stength - mín.
psi mPa psi mPa
A 30.000 205 48.000 330
B 35.000 240 60.000 415
C 40.000 275 70.000 485
Diâmetro ExternoOuter diameter
de 1/8’’ até 1.1/2’’> 1.1/2’’ até 4’’
> 4’’ até 8’’
> 8’’
de1/8’’upto1.1/2’’>1.1/2’’upto4’’
>4’’upto8’’
>8’’
+/- 0,4mm+/- 0,8mm+ 1,6mm- 0,8mm+ 2,4mm-0,8mm
+/- 0,4mm+/-0,8mm+1,6mm-0,8mm+2,4mm-0,8mm
Espessura de paredeWall thickness
A espessura de parede mínima não estará em nenhum ponto mais que 12,5% abaixo da espessura de parede nominal especificada
Theminimumwallthicknesswillnotbeatanypointmorethan12,5%belowthespecifiednominalwallthickness
PesoWeight
+ 10% -3,5%
grauGrade
C (máx.)
mn. (máx.)
Si(máx.)
P (máx.)
S (máx.)
Cr (máx.)
Cu (máx.)
mo (máx.)
Ni (máx.)
V (máx.)
A 0,25 0,27 / 0,93 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
B 0,30 0,29 / 1,06 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
C 0,35 0,29 / 1,06 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
3 - COmPRImENTOS / LENgTh
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
5 - TOLERâNCIAS / TOLERANCES
Obs.: Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, para o grau A até um máximo de 1,35%, para os graus B e C máximo de 1,65%
Obs.: For every 0,01% on maximum specified Carbon reduced, 0,06% increase in the maximum specified manganese is allowed, for grade A up to a maximum of 1,35%,for B and C grades maximum of 1,65%
LisasChanfradas: ≥ 1” (33,4 mm)
Plain Beveled: > 1’’ (33,4 mm)
4 - ACABAmENTO DE PONTAS / END FINIShINg
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste elétrico não destrutivo ou hidrostático de acordo com a bitola e o aço.In addition to technological and physical testing each pipe undergoes a hydrostatic test or NDT according to its size and steel.
6 - ENSAIOS E TESTES / TESTINg
Single random lengths De 4,8 a 6,7m com até 5% de 3,7 a 4,8m
From4,8to6,7mwithupto5%from3,7to4,8m
Double random lengthsMédia mínima de 10,7 m e comprimento mínimo de 6,7 m com até 5% de 4,8 a 6,7m
Minimumaverageof10,7mandminimumlengthof6,7mwithupto5%of4,8to6,7m
FabricaçãoStandard Manufacturing lengths
4 a 8m ou 8 a 13 m4to8mor8to13m
Fixos ou FaixasOther fixed lengths or ranges
Mediante ConsultaUponrequest
ObservaçãoNote
Não poderão ser fornecidos tubos em ‘‘double random lengths’’ para bitola 10’’ e parede ≥ 28,58 mm, para bitola 12’’ e parede ≥ 23,83 mm de 14’’ e parede ≥ 20,62mm
‘‘doublerandomlengths’’tubescannotbesuppliedforOD10’’andwallthickness≥ 28,58mm,forOD12’’andwallthickness≥ 23,83mmandforOD14’’andwallthickness≥ 20,62mm
Obs.: Alongamento conforme a normaObs.: Elongation according to standard
Tubos de aço Sem costura para Serviços em alta TemperaturaSeamless Steel Pipes for high Temperature Service
p.40 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
nBr 6321 • PArA AlTAS TeMPerATurAS / nBr 6321 • For high TeMPerATureS
grauGrade
Limite de Escoamento - mín.Yield Strength - mín.
Resistência à Tração - mín.Tensile Stength - mín.
psi mPa psi mPa
A 30.000 205 48.000 330
B 35.000 240 60.000 415
C 40.000 275 70.000 485
Diâmetro ExternoOuter diameter
de 1/8’’ até 1.1/2’’> 1.1/2’’ até 4’’
> 4’’ até 8’’
> 8’’
de1/8’’upto1.1/2’’>1.1/2’’upto4’’
>4’’upto8’’
>8’’
+/- 0,4mm+/- 0,8mm+ 1,6mm- 0,8mm+ 2,4mm-0,8mm
+/- 0,4mm+/-0,8mm+1,6mm-0,8mm+2,4mm-0,8mm
Espessura de paredeWall thickness
A espessura de parede mínima não estará em nenhum ponto mais que 12,5% abaixo da espessura de parede nominal especificadaTheminimumwallthicknesswillnotbeatanypointmorethan12,5%belowthespecifiednominalwallthickness
PesoWeight
+ 10% -3,5%
grauGrade
C (máx.)
mn. (máx.)
Si(máx.)
P (máx.)
S (máx.)
Cr (máx.)
Cu (máx.)
mo (máx.)
Ni V
(máx.)
A 0,25 0,27 / 0,93 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
B 0,30 0,29 / 1,06 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
C 0,35 0,29 / 1,06 0,10 0,035 0,035 0,40 0,40 0,15 0,40 0,08
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
3 - COmPRImENTOS / LENgTh
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
5 - TOLERâNCIAS / TOLERANCES
Obs.: Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, para o grau A até um máximo de 1,35%, para os graus B e C máximo de 1,65%
Obs.: For every 0,01% on maximum specified Carbon reduced, 0,06% increase in the maximum specified manganese is allowed, for grade A up to a maximum of 1,35%,for B and C grades maximum of 1,65%
LisasChanfradas: ≥ 1” (33,4 mm)
Plain Beveled: > 1’’ (33,4 mm)
4 - ACABAmENTO DE PONTAS / END FINIShINg
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste elétrico não destrutivo ou hidrostático de acordo com a bitola e o aço.In addition to technological and physical testing each pipe undergoes a hydrostatic test or NDT according to its size and steel.
6 - ENSAIOS E TESTES / TESTINg
Single random lengths De 4,8 a 6,7m com até 5% de 3,7 a 4,8m
From4,8to6,7mwithupto5%from3,7to4,8m
Double random lengthsMédia mínima de 10,7 m e comprimento mínimo de 6,7 m com até 5% de 4,8 a 6,7m
Minimumaverageof10,7mandminimumlengthof6,7mwithupto5%of4,8to6,7m
FabricaçãoStandard Manufacturing lengths
4 a 8m ou 8 a 13 m4to8mor8to13m
Fixos ou FaixasOther fixed lengths or ranges
Mediante ConsultaUponrequest
ObservaçãoNote
Não poderão ser fornecidos tubos em ‘‘double random lengths’’ para bitola 10’’ e parede ≥ 28,58 mm, para bitola 12’’ e parede ≥ 23,83 mm de 14’’ e parede ≥ 20,62mm
‘‘doublerandomlengths’’tubescannotbesuppliedforOD10’’andwallthickness≥ 28,58mm,forOD12’’andwallthickness≥ 23,83mmandforOD14’’andwallthickness≥ 20,62mm
Obs.: Alongamento conforme a normaObs.: Elongation according to standard
Tubos de aço Sem costura para Serviços em alta TemperaturaSeamless Steel Pipes for High Temperature Service
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.41
ASTM A 333 • PArA BAixAS TeMPerATurAS
ASTM A 333 • For loW TeMPerATureS
grauGrade
Limite de Escoamento - mín.Yield Strength - mín.
Resistência à Tração - mín.Tensile Stength - mín.
psi mPa psi mPa
1 30.000 205 55.000 380
6 35.000 240 60.000 415
8 75.000 515 100.000 690
Diâmetro ExternoOuter diameter
< 48,3mm> 48,3 < 114,3mm
> 114,3 mm < 219,1mm> 219,1 mm
+ 0,4 / - 0,8mm+ 0,8 / - 0,8mm+ 1,6 / - 0,8mm+ 2,4 / - 0,8mm
Espessura de paredeWall thickness
A espessura de parede mínima não estará em nenhum ponto mais que 12,5% abaixo da espessura de parede nominal especificada
Theminimumwallthicknesswillnotbeatanyendmorethan12,5%belowthespecifiednominalwallthickness
PesoWeight
Diâmetro externo < 323,8 mm +10.0% / -3.5%Diâmetro externo > 323,8 mm +10.0% / -5.0%
Outer Diameter < 323,8 mm + 10.0% / -3.5%Inner Diameter > 323,8 mm + 10.0% / -5.0%
grauGrade
C (máx.)
Si mn. P
(máx.)S
(máx.)Ni Cr Cu V Nb mo
1 0,30 - 0,40 / 1,06 0,025 0,025 - - - - - -
6 0,30 0,10 (mín) 0,29 / 1,06 0,025 0,025 0,40 (max) 0,30 (max) 0,40 (max) 0,08 (max) 0,02 (max) 0,12 (max)
8 0,13 0,13 / 0,32 0,90 (máx) 0,025 0,025 8,40 / 9,60 - - - - -
1 - COmPOSIÇãO QuímICA (%) / ChEmICAL COmPOSITION (%)
5 - TOLERâNCIAS / TOLERANCES
Obs.: Para cada 0,01% de redução sobre o Carbono máximo especificado, é permitido um acréscimo de 0,06% sobre o Manganês máximo especificado, até um máximo de 1,35%Obs.: For every 0,01% of maximum specific carbon reduction,an increase in 0,06% of the maximum manganese is allowed, up to a maximum of 1,35%
LisasChanfradas: ≥ 1” (33,4 mm)
Plain Beveled: > 1’’ (33,4 mm)
Além dos ensaios físicos e tecnológicos executados, cada tubo é submetido a um teste não destrutivo ou hidrostático de acordo com a bitola e o aço.
In addition to technological and physical testing each pipe undergoes a hydrostatic test or NDT according to its size and steel.
6 - ENSAIOS E TESTES / TESTINg
Single random lengths De 4,8 a 6,7m com até 5% de 3,7 a 4,8m
From4,8to6,7mwithupto5%from3,7to4,8m
Double random lengthsMédia mínima de 10,7 m e comprimento mínimo de 6,7 m com até 5% de 4,8 a 6,7m
Minimumaverageof10,7mandminimumlengthof6,7mwithupto5%of4,8to6,7m
FabricaçãoStandard Manufacturing lengths
4 a 8m ou 8 a 13 m4to8mor8to13m
Fixos ou FaixasOther fixed lengths or ranges
Mediante ConsultaUponrequest
ObservaçãoNote
Não poderão ser fornecidos tubos em ‘‘double random lengths’’ para bitola 10’’ e parede ≥ 28,58 mm, para bitola 12’’ e parede ≥ 23,83 mm de 14’’ e parede ≥ 20,62mm
‘‘doublerandomlengths’’tubescannotbesuppliedforOD10’’andwallthickness≥ 28,58mm,forOD12’’andwallthickness≥ 23,83mmandforOD14’’andwallthickness≥ 20,62mm
2 - PROPRIEDADES mECâNICAS / mEChANICAL PROPERTIES
Tubos de aço Sem costura para Serviços em Baixa TemperaturaSeamless Steel Pipes for Low-Temperature Service
Obs.: Alongamento conforme a normaObs.: Elongation according to standard
3 - COmPRImENTOS / LENgTh
4 - ACABAmENTO DE PONTAS / END FINIShINg
p.42 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
diMenSÕeS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
diMenSionS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
Diam. Nom.Diâmetro ExternoOuter Diameter
Espessura de paredeWall thickness
PesoWeight
Esp.Spc.
ComprimentoLength
pol pol mm pol mm kg/m lb/ft SCh SRL DRL
1/4 0.540 13,70.09 2,24 0,63 0,43 STD/40 x x
0.12 3,02 0,80 0,54 XS/80 X x
3/8 0.675 17,1
0.073 1,85 0,70 0,47 30 x x
0.091 2,31 0,84 0,57 STD/40 x x
0.126 3,20 1,10 0,74 XS/80 x x
1/2 0.840 21,3
0.095 2,41 1,12 0,76 30 x x
0.109 2,77 1,27 0,85 STD/40 x x
0.147 3,73 1,62 1,09 XS/80 x x
0.188 4,78 1,95 1,31 160 x x
0.294 7,47 2,55 1,72 XXS x x
3/4 1.050 26,7
0.095 2,41 1,44 0,97 30 x x
0.113 2,87 1,69 1,13 STD/40 x x
0.154 3,91 2,20 1,48 XS/80 x x
0.219 5,56 2,90 1,95 160 x x
0.308 7,82 3,64 2,44 XXS x x
1 1.315 33,4
0.114 2,90 2,18 1,46 30 x x
0.133 3,38 2,50 1,68 STD/40 x x
0.179 4,55 3,24 2,17 XS/80 x x
0.250 6,35 4,24 2,85 160 x x
0.358 9,09 5,45 3,66 XXS x x
1 1/4 1.660 42,2
0.117 2,97 2,87 1,93 30 x x
0.126 3,20 3,08 2,07 x x
0.140 3,56 3,39 2,27 STD/40 x x
0.191 4,85 4,47 3,00 XS/80 x x
0.250 6,35 5,61 3,77 160 x x
0.382 9,70 7,77 5,22 XXS x x
1 1/2 1.900 48,3
0.125 3,18 3,54 2,37 30 x x
0.145 3,68 4,05 2,72 STD/40 x x
0.200 5,08 5,41 3,63 XS/80 x x
0.281 7,14 7,25 4,86 160 x x
0.400 10,15 9,55 6,41 XXS x x
2 2.375 60,3
0.125 3,18 4,48 3,01 30 x x
0.141 3,58 5,01 3,37 x x
0.154 3,91 5,44 3,66 STD/40 x x
0.172 4,37 6,03 4,05 x x
0.188 4,78 6,54 4,40 x x
0.218 5,54 7,48 5,03 XS/80 x x
0.250 6,35 8,45 5,68 x x
0.281 7,14 9,36 6,29 x x
0.344 8,74 11,11 7,47 160 x x
0.436 11,07 13,44 9,04 XXS x x
2 1/2 2.875 73
0.125 3,18 5,48 3,67 x x
0.141 3,58 6,13 4,12 x x
0.156 3,96 6,74 4,53 x x
0.172 4,37 7,40 4,97 x x
0.188 4,78 8,04 5,40 30 x x
0.203 5,16 8,63 5,80 STD/40 x x
0.216 5,49 9,14 6,14 x x
0.250 6,35 10,44 7,02 x x
0.276 7,01 11,41 7,67 XS/80 x x
0.375 9,53 14,92 10,02 160 x x
0.552 14,02 20,39 13,71 XXS x x
Diâmetro / paredes fornecidos como trefilados a frioNota: Outros diâmetros / paredes poderão ser fabricados mediante consulta.Para o aço Grau 8, diametro/paredes serão fornecidos mediante consulta.
Diameter / wall thickness supplied as cold drawnNote: other diameters / wall thickness can be manufactures upon request.For steel grade 8,diameter/wall thickness will be supplied upon demand.
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.43
diMenSÕeS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
diMenSionS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
Diam. Nom.Diâmetro ExternoOuter Diameter
Espessura de paredeWall thickness
PesoWeight
Esp.Spc.
ComprimentoLength
pol pol mm pol mm kg/m lb/ft SCh SRL DRL
3 3.500 88,9
0.141 3,58 7,53 5,06 x x
0.156 3,96 8,29 5,58 x x
0.172 4,37 9,11 6,12 x x
0.188 4,78 9,92 6,66 30 x x
0.216 5,49 11,29 7,58 STD/40 x x
0.250 6,35 12,93 8,69 x x
0.281 7,14 14,40 9,67 x x
0.300 7,62 15,27 10,26 XS/80 x x
0.438 11,13 21,35 14,34 160 x x
0.600 15,24 27,68 18,60 XXS x x
3 1/2 4.000 101,6
0.141 3,58 8,65 5,82 x x
0.156 3,96 9,53 6,41 x x
0.172 4,37 10,48 7,04 x x
0.188 4,78 11,41 7,66 30 x x
0.226 5,74 13,57 9,12 STD/40 x x
0.250 6,35 14,92 10,02 x x
0.281 7,14 16,63 11,17 x x
0.318 8,08 18,63 12,52 XS/80 x x
4 4.500 114,3
0.156 3,96 10,78 7,24 x x
0.172 4,37 11,85 7,96 x x
0.188 4,78 12,91 8,67 30 x x
0.203 5,16 13,89 9,32 x x
0.219 5,56 14,91 10,02 x x
0.237 6,02 16,07 10,80 STD/40 x x
0.250 6,35 16,90 11,36 x x
0.281 7,14 18,87 12,67 x x
0.312 7,92 20,78 13,97 x x
0.337 8,56 22,32 15,00 XS/80 x x
0.438 11,13 28,32 19,02 120 x x
0.531 13,49 33,54 22,53 160 x x
0.674 17,12 41,03 27,57 XXS x x
5 5.563 141,3
0.188 4,78 16,09 10,80 x x
0.219 5,56 18,61 12,51 x x
0.258 6,55 21,77 14,63 STD/40 x x
0.281 7,14 23,62 15,87 x x
0.312 7,92 26,05 17,51 x x
0.344 8,74 28,57 19,19 x x
0.375 9,53 30,97 20,80 XS/80 x x
0.500 12,7 40,28 27,06 120 x x
0.625 15,88 49,11 32,99 160 x x
0.750 19,05 57,43 38,59 XXS x x
6 6.625 168,3
0.188 4,78 19,28 12,94 x x
0.203 5,16 20,76 13,94 x x
0.219 5,56 22,31 15,00 x x
0.250 6,35 25,36 17,04 x x
0.280 7,11 28,26 18,99 STD/40 x x
0.312 7,92 31,33 21,06 x x
0.344 8,74 34,39 23,10 x x
0.375 9,53 37,31 25,05 x x
0.432 10,97 42,56 28,60 XS/80 x x
0.500 12,70 48,73 32,74 x x
0.562 14,27 54,21 36,43 120 x x
0.625 15,88 59,69 40,09 x x
0.719 18,26 67,57 45,39 160 x x
0.750 19,05 70,12 47,10 x x
0.864 21,95 79,22 53,21 XXS x x
0.875 22,23 80,08 53,78 x x
p.44 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Diam. Nom.Diâmetro ExternoOuter Diameter
Espessura de paredeWall thickness
PesoWeight
Esp.Spc.
ComprimentoLength
pol pol mm pol mm kg/m lb/ft SCh SRL DRL
8 8.625 219,1
0.250 6,35 33,32 22,38 20 x x
0.277 7,04 36,82 24,72 30 x x
0.312 7,92 41,25 27,23 x x
0.322 8,18 42,55 28,58 STD/40 x x
0.344 8,74 45,34 30,45 x x
0.375 9,53 49,25 33,07 x x
0.406 10,31 53,09 35,67 60 x x
0.438 11,13 57,08 38,33 x x
0.500 12,70 64,64 43,43 XS/80 x x
0.562 14,27 72,08 48,44 x x
0.594 15,09 75,92 51,00 100 x x
0.625 15,88 79,59 53,45 x x
0.719 18,26 90,44 60,77 120 x x
0.750 19,05 93,98 63,14 x x
0.812 20,62 100,93 67,82 140 x x
0.875 22,23 107,93 72,49 XXS x x
0.906 23,01 111,27 74,76 160 x x
1.000 25,40 121,33 81,51 x x
1.260 32,00 147,64 99,22 x x
1.311 33,32 152,65 102,58 (*) (*)
10 10.750 273,0
0.250 6,35 41,76 28,06 20 x x
0.279 7,09 46,49 31,23 x x
0.307 7,80 51,01 34,27 30 x x
0.344 8,74 56,96 38,27 x x
0.365 9,27 60,29 40,52 STD/40 x x
0.438 11,13 71,88 48,28 x x
0.500 12,70 81,53 54,79 XS/60 x x
0.562 14,27 91,05 61,21 x x
0.594 15,09 95,98 64,49 80 x x
0.625 15,88 100,69 67,65 x x
0.719 18,26 114,71 77,10 100 x x
0.812 20,62 128,34 86,26 x x
0.844 21,44 133,01 89,39 120 x x
0.875 22,23 137,48 92,37 x x
0.938 23,83 146,43 98,39 x x
1.000 25,40 155,10 104,23 XXS/140 x x
1.125 28,58 172,27 115,77 160 x
1.250 31,75 188,90 126,96 x
1.311 33,32 196,95 132,36 (*) (*)
diMenSÕeS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
diMenSionS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.45
Notas: 1 - Outros diâmetros / paredes poderão ser fabricados mediante consulta.2 - Acima de 28,6 mm fornecemos em ponta lisa.3 - Para o aço Grau 8, diâmetro/paredes serão fornecidos mediante consulta. (*) sob consulta
Note: 1 - Other diameters / wall thicknesses can be manufactured upon request.2 - Above 28,6 mm we supply plain end.3 - For steel grade 8, diameter/wallthicknessare manufactered upon request.(*) upon request
Diam. Nom.Diâmetro ExternoOuter Diameter
Espessura de paredeWall thickness
PesoWeight
Esp.Spc.
ComprimentoLength
pol pol mm pol mm kg/m lb/ft SCh SRL DRL
12 12.750 323,8
0.250 6,35 49,71 33,41 20 x x
0.281 7,14 55,76 37,46 x x
0.312 7,92 61,70 41,48 x x
0.330 8,38 65,19 43,81 30 x x
0.344 8,74 67,91 45,62 x x
0.375 9,53 73,86 49,61 STD x x
0.406 10,31 79,71 53,57 40 x x
0.438 11,13 85,82 57,65 x x
0.500 12,70 97,44 65,48 XS x x
0.562 14,27 108,93 73,22 60 x x
0.625 15,88 120,59 81,01 x x
0.688 17,48 132,05 88,71 80 x x
0.750 19,05 143,17 96,21 x x
0.812 20,62 154,17 103,63 x x
0.844 21,44 159,87 107,42 100 x x
0.875 22,23 165,33 111,08 x x
0.938 23,83 176,29 118,40 x
1.000 25,40 186,92 125,61 XXS/120 x
1.062 26,97 197,43 132,69 x
1.125 28,58 208,08 139,81 140 x
1.311 33,32 238,69 160,40 (*) (*)
14 14.000 355,6
0.311 7,90 67,73 45,52 20 x x
0.344 8,74 74,76 50,22 x x
0.375 9,53 81,33 54,62 STD/30 x x
0.406 10,31 87,79 59,00 x x
0.438 11,13 94,55 63,50 40 x x
0.469 11,91 100,95 67,84 x x
0.500 12,70 107,40 72,16 XS x x
0.562 14,27 120,12 80,73 x x
0.594 15,09 126,72 85,14 60 x x
0.625 15,88 133,04 89,36 x x
0.688 17,48 145,76 97,91 x x
0.750 19,05 158,11 106,23 80 x x
0.812 20,62 170,34 114,48 x
0.875 22,23 182,76 122,77 x
0.938 23,83 194,98 130,98 100 x
1.000 25,40 206,84 138,97 x
1.095 27,80 232,00 155,92 (*) (*)
Mass Calculation: m= 0,02466*e*(D-e) where:m = theoretical mass (kg/m)e = wall thickness (mm)D = outer diameter (mm)
cálculo Massa: m= 0,02466*e*(d-e) onde:m = massa teórica (kg/m)e = espessura de parede (mm)d = diâmetro externo (mm)
diMenSÕeS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
diMenSionS • ASTM A 53 / nBr 5590 / ASTM A 106 / nBr 6321 / ASTM A 333
p.46 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
PRINCIPAIS DImENSÕES / mAIN DImENSIONS
MEdIdaS coNForME NorMaS apI 5L, NBr 5590, aSTM a 106, NBr 6321, aSTM a 333Measurements as per API 5L, ASTM A 53, NBR-5590, ASTM A 106, NBR 6321, ASTM A 333 standard
dIMENSÕES E pESo TEÓrIco coNForME NorMa aNSI B36. 10M-1996Dimensions and theoretical weights as per ANSI B36. 10M-1996
dN dE Wall Thickness Weight /
Metro
SchEdULE NUMBEr
pol. mm pol. mm 20 30 40 60 80 100 120 140 160 STd XS XXS
1/4* - 0.540 13,7mm
Kg/m
- - 2,24 - 3,02 - - - - 2,24 3,02 -
- - 0,63 - 0,80 - - - - 0,63 0,80 -
3/8 10 0.675 17,1mm
Kg/m
- 1,85 2,31 - 3,20 - - - - 2,31 3,20 -
- 0,70 0,84 - 1,10 - - - - 0,84 1,10 -
1/2 15 0.840 21,3mm
Kg/m
- 2,41 2,77 - 3,73 - - - 4,78 2,77 3,73 7,47
- 1,12 1,27 - 1,62 - - - 1,95 1,27 1,62 2,55
3/4 20 1.05 26,7mm
Kg/m
- 2,41 2,87 - 3,91 - - - 5,56 2,87 3,91 7,82
- 1,44 1,69 - 2,20 - - - 2,90 1,69 2,20 3,64
1 25 1.315 33,4mm
Kg/m
- 2,90 3,38 - 4,55 - - - 6,35 3,38 4,55 9,09
- 2,18 2,50 - 3,24 - - - 4,24 2,50 3,24 5,45
1 1/4 32 1.66 42,2mm
Kg/m
- 2,97 3,56 - 4,85 - - - 6,35 3,56 4,85 9,70
- 2,87 3,39 - 4,47 - - - 5,61 3,39 4,47 7,77
1 1/2 40 1.9 48,3mm
Kg/m
- 3,18 3,68 - 5,08 - - - 7,14 3,68 5,08 10,15
- 3,53 4,05 - 5,41 - - - 7,25 4,05 5,41 9,56
2 50 2.375 60,3mm
Kg/m
- 3,18 3,91 - 5,54 - - - 8,74 3,91 5,54 11,07
- 4,48 5,44 - 7,48 - - - 11,11 5,44 7,48 13,44
2 1/2 65 2.875 73,0mm
Kg/m
- 4,78 5,16 - 7,01 - - - 9,53 5,16 7,01 14,02
- 8,04 8,63 - 11,41 - - - 14,92 8,63 11,41 20,39
3 80 3.500 88,9mm
Kg/m
- 4,78 5,49 - 7,62 - - - 11,13 5,49 7,62 15,24
- 9,92 11,29 - 15,27 - - - 21,35 11,29 15,27 27,68
3 1/2 - 4 101,6mm
Kg/m
- 4,78 5,74 - 8,08 - - - - 5,74 8,08 -
- 11,41 13,57 - 18,63 - - - - 13,57 18,64 -
4 100 4.500 114,3mm
Kg/m
- 4,78 6,02 - 8,56 - 11,13 - 13,49 6,02 8,56 17,12
- 12,91 16,08 - 22,32 - 28,32 - 33,54 16,07 22,32 41,03
5 125 5.563 141,3mm
Kg/m
- - 6,55 - 9,53 - 12,7 - 15,88 6,55 9,53 19,05
- - 21,77 - 30,97 - 40,28 - 49,12 21,77 30,97 57,43
6 150 6.625 168,3mm
Kg/m
- - 7,11 - 10,97 - 14,27 - 18,26 7,11 10,97 21,95
- - 28,26 - 42,56 - 54,21 - 67,57 28,26 42,56 79,22
8 200 6,625 219,1mm
Kg/m
6,35 7,04 8,18 10,31 12,70 15,09 18,26 20,62 23,01 8,18 12,7 22,23
33,32 36,82 42,55 53,09 64,64 75,92 90,44 100,93 111,27 42,55 64,64 107,92
10 250 10.750 273,0mm
Kg/m
6,35 7,80 9,27 12,7 15,09 18,26 21,44 25,4 28,58 9,27 12,70 25,40
41,76 51,01 60,29 81,55 95,98 114,71 133,01 155,1 172,27 60,3 81,55 155,15
12 300 12.750 323,8mm
Kg/m
6,35 8,38 10,31 14,27 17,48 21,44 25,4 28,58 33,32 9,53 12,70 25,40
49,71 65,19 79,71 108,93 132,05 159,87 186,92 208,08 238,69 73,88 97,48 186,97
14 350 14000 355,6mm
Kg/m
7,92 9,53 11,13 15,09 19,05 23,83 27,79 31,75 35,71 9,53 12,70 -
67,91 81,33 94,55 126,72 158,11 198,98 224,66 253,58 281,72 81,33 107,39 -
16 400 16000 406,4mm
Kg/m
7,92 9,53 12,70 16,66 21,44 26,19 30,96 36,53 40,49 9,53 12,70 -
77,83 93,27 123,31 160,13 203,53 245,57 286,66 333,21 365,35 93,27 123,31 -
18 450 18000 457,0mm
Kg/m
7,92 11,13 14,27 19,05 23,83 29,36 34,93 39,67 45,24 9,53 12,70 -
87,71 122,38 155,81 205,75 254,57 309,64 363,58 408,28 459,39 105,17 139,16 -
20 500 20000 508,0mm
Kg/m
9,53 12,70 15,09 20,62 26,19 32,54 38,10 44,45 50,01 9,53 12,70 -
117,15 155,13 183,43 248,84 311,19 381,55 441,52 508,15 564,85 117,15 155,13 -
22 ... 22000 559,0mm
Kg/m
9,53 12,70 - 22,23 28,58 34,93 41,28 47,63 53,98 9,53 12,70 -
129,14 171,1 - 294,27 373,85 451,45 527,05 600,67 672,3 129,14 171,1 -
24 600 24000 610,0mm
Kg/m
9,53 14,27 17,48 24,61 30,96 38,89 46,02 52,37 59,54 9,53 12,70 -
141,12 209,65 255,43 355,28 442,11 547,74 640,07 720,19 808,27 141,12 187,07 -
*exceto API 5L PRODuzImOS OuTRAS mEDIDAS ALÉm DAS APRESENTADAS NAS NORmAS INTERNACINAIS
wE PRODuCE OThER mEASuRES IN ADDITION TO ThOSE PRESENTED IN ThE INTERNATIONAL STANDARDS
Vallourec BrasilDN - Diâmetro Nominal / NominaldiameterDN - Diâmetro Nominal / Nominaldiameter
Grupo ValourecSTD - StandardXS - Extra StrongXXS- Double Extra Strong
As principais normas internacionais para tubos condutores de aço sem costura são API 5L, ASTM A 53, NBR 5590, ASTM A 106, NBR 6321, ASTM A 333
The main international standards for seamless steel line pipes are API 5L, ASTM A 53,NBR 5590, ASTM A 106, NBR 6321, ASTM A 333
p.48 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
END-TRuINg - USINAGEM DE PONTAS
Desenvolvido pela Vallourec o processo consiste na usinagem das pontas dos tubos, assegurando precisas tolerâncias dimensionais dos diâmetros internos e externos. A usinagem de ponta permite um aumento na produtividade em termos de operação de soldagem e redução de custos baseada principalmente em:
• Redução do tempo de setup durante o processo de soldagem e inspeção ndt.
• Eliminação da necessidade de pipe sorting na base ou no canteiro de obra.
• Redução de perdas e retrabalho durante o processo de soldagem e inspeção ndt.
• Redução no prazo de entrega dos tubos, se considerarmos que a usinagem seria feita de forma manual fora de linha.
• Aumento da resistência à fadiga em aplicações dinâmicas como os risers de produção.
END-TRuING - END mAChININg
Developed by Vallourec this process consists of machining the ends of the tubes, this way assuring precise dimensional tolerances of inner and outer diameters. The machining of the ends allows an increase in productivity in relation to welding operation and cost reduction based especially on:
• Lowering of setup time during the welding process and NDT inspections.
• Eliminating the need for pipe sorting at the spoolbase or the construction site.
• Reducing losses and rework during welding and NDT inspection processes.
• Shortening delivery time of tubes, considering the machining would otherwise be done manually and outside the line.
• Increase in resistance to stress in dynamic applications such as production risers.
principais Serviços oferecidos para Tubos condutores e projetos Lipe pipe Main Services offered for Line pipes and Line Pipe Projects
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.49
REVESTIMENTO INTERNO E EXTERNO
Através de parceiros criteriosamente selecionados e com base em normas e padrões internacionais de produção e qualidade, a Vallourec oferece soluções em revestimentos que atendem as especificações de cada cliente, em variadas aplicações.
INNER AND OuTER COATINg
Through carefully selected partners and based on international production and quality standards and norms, Vallourec offers coating solutions to meet the specifications of each client, in various applications.
Diâmetro nominal dos tubos: Nominal pipe diameter:
de 2” (60,3 mm) a 14” (355,6 mm) 2” (60,3 mm) to 14” (355,6 mm)
Comprimento: Length:
de 8 a 14 metros8m (26.25 ft.) to 14m (45.93 ft.)
Peso máximo por tubo: Max. pipe weight:
4.000 kg (8.000 lb.)
Tipo de aplicação: Application:
Revestimentos externos em fusion Bonded Epoxy (FBE) e sistemas multicamada utilizando Polietileno ou Polipropileno, além de isolamento térmico em polipropileno sólido ou sintático, ULTRA.FBE (Fusion Bonded Epoxy) external coatings and multi-layer Polyethylene or Polypropylene coating systems.
Normas e especificações: Standards and specifications:
Poderão ser aplicados conforme normas e especificações Brasileiras (Petrobras), Alemã (DIN), Francesa (NFA), Canadense ou outras especificações mediante análise prévia.Brazilian (Petrobras), German (DIN), French (NFA), Canadian or other technical standards and specifications can be applied, subject to consultation.
Jateamento e Pintura: Blasting/Paint
Poderão ser aplicadas conforme normas e especificações Brasileiras (Petrobras) – outras especificações mediante análise prévia.Brazilian (Petrobras) or other technical standards and specifications can be applied, subject to consultation.
REVESTImENTO DE JuNTA DE CAmPOEm POLIPROPILENO E POLIETILENO SPRAy guN®
FIELD JOINT COATING IN POLYPROPYLENE AND POLYETHYLENE SPRAY GuN®
mANTAS TERmOCONTRÁTEIS
SHRINKABLE SLEEVES
PE/PP APLICADO ATRAVÉS DE SISITEMA SPRAY GUN®
pe/pp applied through spray gun system®
FBE APLICADO ELETROSTATICAMENTEFBe eletrostatically applies
TUBO DE AÇO / steel pipe
TRIPLA CAMADA PE/PP / tree layer pe/pp
MANTA TERMOCONTRÁTIL / shrinkaBle sleeves
TUBO DE AÇO / steel pipe
PRIMER EPÓXI LÍQUIDO (RECOMENDADO)liquid primer epoxi (recomended)
TRIPLA CAMADA POLIETILENOtree layer polyethylene
Fusion Bonded Epoxy Dupla camada de FBEduo layer FBe
FBeFBE
adhesive
solid ppPolipropileno Sólido
Espuma de PolipropilenoFoam pp
Capa protetora externaouter shield
AdesivoFBEFBe
Adesivocopolymer adhesive
Polipropilenopolyethylene
FBEFBe
Adesivocopolymer adhesive
Polipropilenopolyethylene
Revestimento de eficiência de fluxoFlow efficiency coating
Tubos para Caldeiras e Trocadores de Calor Tubes for Boilers and Heat Exchangers
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.51
Líder no mercado de geração de energia, a Vallourec é capaz de fornecer a mais variada gama de tubos para a construção de caldeiras, trocadores de calor e os mais complexos equipamentos para troca térmica.Oferecemos soluções eficientes em tubos de aço carbono e aços ligados sobmedida para cada projeto através de uma relação estreita e trasparente com os nossos clientes. A Vallourec oferece serviços e produtos através de parcerias de longa duração e planejamento colaborativo visando garantir o melhor preço, prazo de entrega e flexibilidade de produção.
World leader in the Powergen Market, Vallourec is able to supply a wide variety of tubes for boilers, heat exchangers and the most complex equipment related to heat exchange.We offer effective solutions in Carbon Steel tubes and low alloy steels, tailor made for each application. This is done through close and intense cooperation with our clients.Vallourec offers services and products which are the result of long term frame agreement and collaborative planning. This way we insure the best prices, delivery times and flexibility in terms of production.
Vantagens Advantages
Alta resistência à corrosão High corrosion resistance
Baixo custo de manutenção Low maintenance costs
Excelentes propriedades mecânicas Excellent Mechanical Properties
Alta confiabilidade High reliability
Facilidade de conformação Facility to conform
Longa vida útil Long product lifetime
Boa soldabilidade Good weldability
Assistência técnica especializada e in loco Specialized technical assistance on site
Baixa rugosidade interna Low internal roughness
Alta condutividade térmica High Thermo conveyance
p.52 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
NormaStandard
AplicaçãoApplication
DIN
1629Caldeiras, aparelhos, reservatórios e outros
Generalapplication
1630Caldeiras, aparelhos, reservatórios e outros
Generalapplication
17175Caldeiras - altas temperaturas
High-temperatureservices
ASTm
A 106Serviços de alta temperaturaHigh-temperatureservices
A 179Condensadores e trocadores de calor
Condensers,heatexchangersandaircoolers
A 192Caldeiras e superaquecedores de alta pressão
Boilersandhighpressuresuperheaters
A 209Caldeiras e superaquecedores
Boilersandsuperheaters
A 210Caldeiras e superaquecedores
Boilersandsuperheaters
A 213Caldeiras, superaquecedores e trocadores de calor
Boilers,superheatersandheatexchangers
A 333Serviços em baixa temperatura
Low-temperatureservices
A 334Serviços em baixa temperatura
Low-temperatureservices
A 335Serviços em alta temperatura
High-temperatureservices
A 423Trabalho sob pressão, com maior resistência à corrosão
Corrosionresistance
principais Normas Técnicas de Tubos de aço Sem costura para caldeiras e Trocadores de calorMain Technical Standards for Boilers and Heat Exchangers
p.54 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
NormaStandard
AçoSteel
C mn P max. S max. Si Ni Cr mo Cu V max Nb N
Propriedades mecânicasMechanical Properties
RT.(mPa)mín LE.(mPa)minDureza max.
Max. Hardness
A 106
Gr A Max 0,25 0,27 / 0,93 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 330 205
Gr B Max 0,30 0,29 / 1,06 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 415 240
Gr C Max 0,35 0,29 / 1,06 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 485 275
A 179 A 179 0,06 / 0,18 0,27 / 0,63 0,035 0,035 72 HRB
A 192 A 192 0,06 / 0,18 0,27 / 0,63 0,035 0,035 Max 0,25 137 HB
A 209
Gr T1 0,10 / 0,20 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 380 205 146 HB
Gr T1a 0,15 / 0,25 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 415 220 153 HB
Gr T1b Max 0,14 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 365 195 137 HB
A 210Gr A1 Max 0,27 Max 0,93 0,035 0,035 Mín 0,10 415 255 143 HB
Gr C Max 0,35 0,29 / 1,06 0,035 0,035 Mín 0,10 485 275 179 HB
A 213
Gr T2 0,10 / 0,20 0,30 / 0,61 0,025 0,025 0,10 / 0,30 0,50 / 0,81 0,44 / 0,65 415 205 163 HB
Gr T5 Max 0,15 0,30 / 0,60 0,025 0,025 Max 0,5 4,00 / 6,00 0,45 / 0,65 415 205 163 HB
Gr T9 Max 0,15 0,30 / 0,60 0,025 0,025 0,25 / 1,00 8,00 / 10,00 0,90 / 1,10 415 205 179 HB
Gr T11 0,05 / 0,15 0,30 / 0,60 0,025 0,025 0,50 / 1,00 1,00 / 1,50 0,44 / 0,65 415 205 163 HB
Gr T12 0,05 / 0,15 0,30 / 0,61 0,025 0,025 Max 0,50 0,80 / 1,25 0,44 / 0,65 415 220 163 HB
Gr T22 0,05 / 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 1,90 / 2,60 0,87 / 1,13 415 205 163 HB
A 333Gr1 Max 0,30 0,40 / 1,06 0,025 0,025 380 205
Gr6 Max 0,30 0,29 / 1,06 0,025 0,025 Min 0,10 Max 0,40 Max 0,30 Max 0,12 Max 0,40 0,08 Max 0,02 415 240
A 334Gr1 Max 0,30 0,40 / 1,06 0,025 0,025 380 205
Gr6 Max 0,30 0,29 / 1,06 0,025 0,025 Min 0,10 415 240
A 335
Gr P1 0,10 / 0,20 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 380 205
Gr P2 0,10 / 0,20 0,30 / 0,61 0,025 0,025 0,10 / 0,30 0,50 / 0,81 0,44 / 0,65 380 205
Gr P5 Max 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 4,00 / 6,00 0,45 / 0,65 415 205
Gr P9 Max 0,15 0,30 / 0,60 0,025 0,025 0,25 / 1,00 8,00 / 10,00 0,90 / 1,10 415 205
Gr P11 0,05 / 0,15 0,30 / 0,60 0,025 0,025 0,50 / 1,00 1,00 / 1,50 0,90 / 1,10 415 205
Gr P12 0,05 / 0,15 0,30 / 0,61 0,025 0,025 Max 0,50 0,80 / 1,25 0,44 / 0,65 415 220
Gr P22 0,05 / 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 1,90 / 2,60 0,87 / 1,13 415 205
A 423 Gr 1 Max 0,15 Max 0,55 0,06 / 0,16 0,06 Min 0,10 0,20 / 0,70 0,24 / 1,31 0,20 / 0,60 415 255 170 HB
DIN 1629
St 37.0 Max 0,17 0,040 0,040 Max 0,09 350 / 480 235
St 44.0 Max 0,21 0,040 0,040 Max 0,09 420 / 550 275
St 52.0 Max 0,22 Max 1,70 0,040 0,035 Max 0,60 500 / 650 355
DIN 1630
St 37.4 Max 0,17 Min 0,35 0,040 0,040 Max 0,35 350 / 480 235
St 44.4 Max 0,20 Min 0,40 0,040 0,040 Max 0,35 420 / 550 275
St 52.4 Max 0,22 Max 1,60 0,040 0,035 Max 0,55 500 / 650 355
DIN 17175
St 35.8 Max 0,17 0,40 / 0,80 0,040 0,040 0,10 / 0,35 360 / 480 235
St 45.8 Max 0,21 0,40 / 1,20 0,040 0,040 0,10 / 0,35 410 / 530 255
15 Mo3 0,12 / 0,20 0,40 / 0,80 0,035 0,035 0,10 / 0,35 0,25 / 0,35 450 / 600 270
13CrMo44 0,10 / 0,18 0,40 / 0,70 0,035 0,035 0,10 / 0,35 0,70 / 1,10 0,45 / 0,65 440 / 590 290
10CrMo910 0,08 / 0,15 0,40 / 0,70 0,035 0,035 Max 0,50 2,00 / 2,50 0,90 / 1,20 450 / 600 280
1 - COmPOSIÇãO QuímICA (%) E PROPRIEDADES mECâNICAS1 - ChEmICAL COmPOSITION (%) AND mEChANICAL PROPERTIES
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.55
NormaStandard
AçoSteel
C mn P max. S max. Si Ni Cr mo Cu V max Nb N
Propriedades mecânicasMechanical Properties
RT.(mPa)mín LE.(mPa)minDureza max.
Max. Hardness
A 106
Gr A Max 0,25 0,27 / 0,93 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 330 205
Gr B Max 0,30 0,29 / 1,06 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 415 240
Gr C Max 0,35 0,29 / 1,06 0,035 0,035 Mín 0,10 Max 0,40 Max 0,40 Max 0,15 Max 0,40 0,08 485 275
A 179 A 179 0,06 / 0,18 0,27 / 0,63 0,035 0,035 72 HRB
A 192 A 192 0,06 / 0,18 0,27 / 0,63 0,035 0,035 Max 0,25 137 HB
A 209
Gr T1 0,10 / 0,20 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 380 205 146 HB
Gr T1a 0,15 / 0,25 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 415 220 153 HB
Gr T1b Max 0,14 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 365 195 137 HB
A 210Gr A1 Max 0,27 Max 0,93 0,035 0,035 Mín 0,10 415 255 143 HB
Gr C Max 0,35 0,29 / 1,06 0,035 0,035 Mín 0,10 485 275 179 HB
A 213
Gr T2 0,10 / 0,20 0,30 / 0,61 0,025 0,025 0,10 / 0,30 0,50 / 0,81 0,44 / 0,65 415 205 163 HB
Gr T5 Max 0,15 0,30 / 0,60 0,025 0,025 Max 0,5 4,00 / 6,00 0,45 / 0,65 415 205 163 HB
Gr T9 Max 0,15 0,30 / 0,60 0,025 0,025 0,25 / 1,00 8,00 / 10,00 0,90 / 1,10 415 205 179 HB
Gr T11 0,05 / 0,15 0,30 / 0,60 0,025 0,025 0,50 / 1,00 1,00 / 1,50 0,44 / 0,65 415 205 163 HB
Gr T12 0,05 / 0,15 0,30 / 0,61 0,025 0,025 Max 0,50 0,80 / 1,25 0,44 / 0,65 415 220 163 HB
Gr T22 0,05 / 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 1,90 / 2,60 0,87 / 1,13 415 205 163 HB
A 333Gr1 Max 0,30 0,40 / 1,06 0,025 0,025 380 205
Gr6 Max 0,30 0,29 / 1,06 0,025 0,025 Min 0,10 Max 0,40 Max 0,30 Max 0,12 Max 0,40 0,08 Max 0,02 415 240
A 334Gr1 Max 0,30 0,40 / 1,06 0,025 0,025 380 205
Gr6 Max 0,30 0,29 / 1,06 0,025 0,025 Min 0,10 415 240
A 335
Gr P1 0,10 / 0,20 0,30 / 0,80 0,025 0,025 0,10 / 0,50 0,44 / 0,65 380 205
Gr P2 0,10 / 0,20 0,30 / 0,61 0,025 0,025 0,10 / 0,30 0,50 / 0,81 0,44 / 0,65 380 205
Gr P5 Max 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 4,00 / 6,00 0,45 / 0,65 415 205
Gr P9 Max 0,15 0,30 / 0,60 0,025 0,025 0,25 / 1,00 8,00 / 10,00 0,90 / 1,10 415 205
Gr P11 0,05 / 0,15 0,30 / 0,60 0,025 0,025 0,50 / 1,00 1,00 / 1,50 0,90 / 1,10 415 205
Gr P12 0,05 / 0,15 0,30 / 0,61 0,025 0,025 Max 0,50 0,80 / 1,25 0,44 / 0,65 415 220
Gr P22 0,05 / 0,15 0,30 / 0,60 0,025 0,025 Max 0,50 1,90 / 2,60 0,87 / 1,13 415 205
A 423 Gr 1 Max 0,15 Max 0,55 0,06 / 0,16 0,06 Min 0,10 0,20 / 0,70 0,24 / 1,31 0,20 / 0,60 415 255 170 HB
DIN 1629
St 37.0 Max 0,17 0,040 0,040 Max 0,09 350 / 480 235
St 44.0 Max 0,21 0,040 0,040 Max 0,09 420 / 550 275
St 52.0 Max 0,22 Max 1,70 0,040 0,035 Max 0,60 500 / 650 355
DIN 1630
St 37.4 Max 0,17 Min 0,35 0,040 0,040 Max 0,35 350 / 480 235
St 44.4 Max 0,20 Min 0,40 0,040 0,040 Max 0,35 420 / 550 275
St 52.4 Max 0,22 Max 1,60 0,040 0,035 Max 0,55 500 / 650 355
DIN 17175
St 35.8 Max 0,17 0,40 / 0,80 0,040 0,040 0,10 / 0,35 360 / 480 235
St 45.8 Max 0,21 0,40 / 1,20 0,040 0,040 0,10 / 0,35 410 / 530 255
15 Mo3 0,12 / 0,20 0,40 / 0,80 0,035 0,035 0,10 / 0,35 0,25 / 0,35 450 / 600 270
13CrMo44 0,10 / 0,18 0,40 / 0,70 0,035 0,035 0,10 / 0,35 0,70 / 1,10 0,45 / 0,65 440 / 590 290
10CrMo910 0,08 / 0,15 0,40 / 0,70 0,035 0,035 Max 0,50 2,00 / 2,50 0,90 / 1,20 450 / 600 280
p.56 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
2.1 - mATERIAIS COm REQuISITOS gERAIS CONFORmE NORmA ASTm A 4502.1 - mATERIALS wITh gENERAL REQuIREmENTS AS PROVIDED By ASTm A 450
2.2 - mATERIAIS COm REQuISITOS gERAIS CONFORmE NORmA ASTm 10162.2 - mATERIALS wITh gENERAL REQuIREmENTS AS PROVIDED By ASTm 1016
2.3 - mATERIAS COm REQuISITOS gERAIS CONFORmE NORmA ASTm A 5302.3 - mATERIALS wITh gENERAL REQuIREmENTS AS PROVIDED By ASTm A 530
2.4 - mATERIAS COm REQuISITOS gERAIS CONFORmE NORmA ASTm A 999 2.4 - mATERIALS wITh gENERAL REQuIREmENTS AS PROVIDED By ASTm A 999
Os tubos poderão ser fornecidos, Laminados a Quente ou Trefilados a Frio, de acordo com as normas e dimensões especificadas.The tubes may be supplied Hot- Rolled or Cold-Drawn, according to specified standards and dimensions.
NormaNorma
graus de AçoGraus de Aço
Tratamento TérmicoTratamento Térmico
Aplicações Aplicações
ASTm A179 A179RECOZIDORECOZIDO
Condensadores e Trocadores de CalorCondensadoreseTrocadoresdeCalor
ASTm A192 A192NORMALIZADO(*)NORMALIZADO(*)
Caldeiras e Superaquecedores de alta pressãoCaldeiraseSuperaquecedoresdealtapressão
ASTm A210 A1 e CNORMALIZADO(*)NORMALIZADO(*)
Caldeiras e SuperaquecedoresCaldeiraseSuperaquecedores
ASTm A423 GR 1NORMALIZADO(*)NORMALIZADO(*)
Caldeiras e SuperaquecedoresCaldeiraseSuperaquecedores
* Quando Trefilado ou solicitado teste de impacto* When cold drawn or when impact test is requested
* Quando Trefilado ou solicitado teste de impacto* When cold drawn or when impact test is requested
* Quando Trefilado ou solicitado teste de impacto* When cold drawn or when impact test is requested
* Quando Trefilado ou solicitado teste de impacto* When cold drawn or when impact test is requested
NormaStandard
graus de AçoSteel Grades
Tratamento TérmicoHeat Treatment
Aplicações Applications
ASTm A 179 A 179RECOZIDOANNEALED
Condensadores e Trocadores de CalorCondensorsandheatexchangers
ASTm A 192 A 192NORMALIZADO(*)NORMALIZED(*)
Caldeiras e Superaquecedores de alta pressãoBoilersandhighpressuresuperheaters
ASTm A 210 A 1 e CNORMALIZADO(*)NORMALIZED(*)
Caldeiras e SuperaquecedoresBoilersandsuperheaters
ASTm A 423 GR 1NORMALIZADO(*)NORMALIZED(*)
Caldeiras e SuperaquecedoresBoilersandsuperheaters
NormaStandard
graus de AçoSteel Grades
Tratamento TérmicoHeat Treatment
Aplicações Applications
ASTm A 209 T1, T1a e T1bRECOZIDOANNEALED
Caldeiras e Superaquecedores Boilersandsuperheaters
ASTm A 213 T2,T5,T9,T11,T12,T22 RECOZIDOANNEALED
Caldeiras, Superaquecedores e Trocadores de calorBoliers,Superheatersandheatexchangers
ASTm A 334 1 e 6NORMALIZADO(*)NORMALIZED(*)
Serviços em baixa temperaturaLow-temperatureservices
NormaStandard
graus de AçoSteel Grades
Tratamento TérmicoHeat Treatment
Aplicações Applications
ASTm A 333 1 e 6NORMALIZADO(*)NORMALIZED(*)
Serviços em baixa temperaturaLow-temperatureservices
ASTm A 335 P1,P2,P5,P9,P11, P12 e P22RECOZIDOANNEALED
Serviços em alta temperaturaHigh-temperatureservices
NormaStandard
graus de AçoSteel Grades
Tratamento TérmicoHeat Treatment
Aplicações Applications
ASTm A 106 A, B e C ( acalmado)NORMALIZADO(*)NORMALIZED(*)
Serviços em alta temperaturaHigh-temperatureservices
Tubos de aço Sem costura para caldeiras, Trocadores de calor e condução de Fluidos em aço carbono e LigadoSeamless Steel Tubes for Boilers and Heat Exchangers and Line Pipes in Carbon and Low Alloy Grades
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.57
DImENSÕES uSuAIS: / COmmON SIzE RANgE:
Outros diâmetros/paredes podem ser produzidos mediante consulta, já que a nossa trefilaria pode produzir tubos com diâmetros de 6,0mm a 235,0mm e paredes de 0,5mm a 23mm de espessura, dependendo da relação diâmetro externo/espessura de parede.
Other diameters/wall thicknesses may be manufactured to order,as our cold drawing shop can produce tubes with diameters between 6,0mm to 235,0mm and wall thicknesses from 0,5mm to 23mm , depending on the outside diameter/wall thickness ratio.
Espessura da Parede Wall Thickness
Bwg 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Diâmetro ExternoOutside
Diameter
mm 1,24 1,47 1,65 1,83 2,11 2,41 2,77 3,05 3,4 3,76 4,19 4,57 5,16 5,59 6,05 6,58 7,21 7,62 8,64
1/2" 12,70
5/8" 15,88
3/4" 19,05
1" 25,40
1. 1/4" 31,75
1. 3/8" 34,92
1. 1/2" 38,10
1. 3/4" 44,45
2" 50,80
2.1/4" 57,15
2.1/2" 63,50
2. 3/4" 69,85
3" 76,20
3. 1/4" 82,50
3. 1/2" 88,90
4" 101,60
4. 1/2" 114,30
5" 127,00
Tubos de aço Sem costura Trefilados para Trocadores de calorCold Drawn Seamless Steel Tubes for Heat Exchangers
p.58 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
mm mm Kg/m
31,80
2,60 1,87
3,20 2,26
4,00 2,74
5,00 3,30
5,60 3,62
33,70
2,60 1,99
3,20 2,41
4,50 3,24
5,60 3,38
38,00
2,60 2,27
3,20 2,75
5,00 4,07
7,10 5,41
42,40
2,60 2,55
3,60 3,44
5,00 4,61
6,30 5,61
7,10 6,18
44,50
2,90 2,98
3,20 3,26
5,00 4,87
6,30 5,94
8,80 7,75
48,30
2,90 3,25
3,60 3,97
5,00 5,34
7,10 7,21
10,00 9,45
50,80
2,90 3,42
3,20 3,76
5,60 6,24
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
mm mm Kg/m
50,806,30 6,91
10,00 10,06
57,00
2,90 3,87
3,60 4,74
5,60 7,10
7,10 8,74
11,00 12,50
60,30
2,90 4,11
4,00 5,55
5,60 7,55
7,10 9,32
12,50 14,70
63,50
3,20 4,76
4,50 6,55
6,30 8,89
73,00
2,90 5,01
3,60 6,16
5,60 9,31
8,00 12,80
12,50 18,70
76,10
3,20 5,75
5,00 8,77
6,30 10,80
7,10 12,10
12,50 19,60
88,90
3,60 7,57
5,00 10,30
6,30 12,80
8,00 16,00
14,20 26,20
TuBOS LAmINADOS A QuENTE Em DImENSÕES CONFORmE NORmAS ASTm/DINhOT ROLLED TuBES IN ACCORDANCE TO ASTm/DIN STANDARDS
dimensões Usuais dos Tubos de aço Sem costura para caldeirasCommon Size Range for Boilers
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.59
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
mm mm Kg/m
101,60
3,60 8,70
4,50 10,80
6,30 14,80
8,00 18,50
14,20 30,60
108,00
4,00 10,30
5,00 12,70
6,30 15,80
8,80 21,50
14,20 32,80
114,30
3,60 9,83
4,50 12,20
6,30 16,80
8,80 22,90
16,00 38,80
127,00
4,00 12,10
5,60 16,80
7,10 21,00
8,80 25,70
16,00 43,80
133,00
4,00 12,70
5,60 17,60
7,10 22,00
8,80 27,00
16,00 46,20
139,70
4,00 13,40
5,60 18,50
6,30 20,70
8,80 28,40
10,00 32,00
16,00 48,80
Tolerância para comprimento fixo de 0 + 100mm.Comprimento: até 14,5m - Para os tubos caldeira laminados poderemos fabricar com comprimentos fixos de até 22m mediante consulta.Outras espessuras de parede podem ser fornecidas mediante consulta.
Tolerance for fixed length 0 + 100mm.Length:up to 14,5m - We can manufacture rolled tubes for boilers with fixed length of up to 22m on request.Other wall thicknesses can be supplied on request.
CONDIÇÕES gERAIS:
gENERAL CONDITIONS:
dimensões Usuais dos Tubos de aço Sem costura para caldeirasCommon Size Range for Boilers
p.60 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
3/8 0.675 17,10.091 2,31 0,84 40 (*)
0.126 3,20 1,10 80 (*)
1/2 0.840 21,3
0.109 2,77 1,27 40 (*)
0.147 3,73 1,62 80 (*)
0.188 4,78 1,95 160 (*)
0.294 7,47 2,55 XXS (*)
3/4 1.050 26,70.219 5,56 2,90 160 (*)
0.308 7,82 3,64 XXS (*)
1 1.315 33,4
0.133 3,38 2,50 40 6,0 a 12,5
0.179 4,55 3,24 80 6,0 a 12,5
0.250 6,35 4,24 160 6,0 a 12,5
1 1/4 1.660 42,2
0.140 3,56 3,39 40 6,0 a 12,5
0.191 4,85 4,47 80 6,0 a 12,5
0.250 6,35 5,61 160 6,0 a 12,5
0.382 9,70 7,77 XXS 6,0 a 12,5
1 1/2 1.900 48,3
0.145 3,68 4,05 40 6,0 a 12,5
0.200 5,08 5,41 80 6,0 a 12,5
0.281 7,14 7,25 160 6,0 a 12,5
0.400 10,15 9,55 XXS 6,0 a 12,5
2 2.375 60,3
0.125 3,18 4,48 6,0 a 12,5
0.141 3,58 5,01 6,0 a 12,5
0.154 3,91 5,44 40 6,0 a 12,5
0.172 4,37 6,03 6,0 a 12,5
0.188 4,78 6,54 6,0 a 12,5
0.218 5,54 7,48 80 6,0 a 12,5
0.250 6,35 8,45 6,0 a 12,5
0.281 7,14 9,36 6,0 a 12,5
0.344 8,74 11,11 160 6,0 a 12,5
0.436 11,07 13,44 XXS 6,0 a 12,5
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.61
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
2 1/2 2.875 73,0
0.125 3,18 5,48 6,0 a 12,5
0.141 3,58 6,13 6,0 a 12,5
0.156 3,96 6,74 6,0 a 12,5
0.172 4,37 7,40 6,0 a 12,5
0.188 4,78 8,04 6,0 a 12,5
0.203 5,16 8,63 40 6,0 a 12,5
0.216 5,49 9,14 6,0 a 12,5
0.250 6,35 10,44 6,0 a 12,5
0.276 7,01 11,41 80 6,0 a 12,5
0.375 9,53 14,92 160 6,0 a 12,5
0.552 14,02 20,39 XXS 6,0 a 12,5
3 3.500 88,9
0.141 3,58 7,53 6,0 a 12,5
0.156 3,96 8,30 6,0 a 12,5
0.172 4,37 9,11 6,0 a 12,5
0.188 4,78 9,92 6,0 a 12,5
0.216 5,49 11,29 40 6,0 a 12,5
0.250 6,35 12,93 6,0 a 12,5
0.281 7,14 14,40 6,0 a 12,5
0.300 7,62 15,27 80 6,0 a 12,5
0.438 11,13 21,35 160 6,0 a 12,5
0.600 15,24 27,68 XXS 6,0 a 11,5
3 1/2 4.000 101,6
0.141 3,58 8,65 6,0 a 12,5
0.156 3,96 9,54 6,0 a 12,5
0.172 4,37 10,48 6,0 a 12,5
0.188 4,78 11,41 6,0 a 12,5
0.226 5,74 13,57 40 6,0 a 12,5
0.250 6,35 14,92 6,0 a 12,5
0.281 7,14 16,63 6,0 a 12,5
0.318 8,08 18,63 80 6,0 a 12,5
Cold drawn tubes.Dimentional tolerances according to normOther fixed lengths may be manufactured on request.(*) Length on request
Tubos trefilados a frio Tolerâncias dimensionais conforme norma.Outros comprimentos ou comprimentos fixos podem ser produzidos mediante consulta.(*) Comprimento sobre consulta.
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
CONDIÇÕES gERAIS: gENERAL CONDITIONS:
p.62 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
4 4.500 114,3
0.141 3,58 9,78 6,0 a 12,5
0.156 3,96 10,78 6,0 a 12,5
0.172 4,37 11,85 6,0 a 12,5
0.188 4,78 12,91 6,0 a 12,5
0.203 5,16 13,89 6,0 a 12,5
0.219 5,56 14,91 6,0 a 12,5
0.237 6,02 16,08 40 6,0 a 12,5
0.250 6,35 16,91 6,0 a 12,5
0.281 7,14 18,87 6,0 a 12,5
0.312 7,92 20,78 6,0 a 12,5
0.337 8,56 22,32 80 6,0 a 12,5
0.438 11,13 28,32 120 6,0 a 12,5
0.531 13,49 33,54 160 6,0 a 12,5
0.674 17,12 41,03 XXS 6,0 a 11,5
5 5.563 141,3
0.188 4,78 16,09 6,0 a 12,5
0.219 5,56 18,61 6,0 a 12,5
0.258 6,55 21,77 40 6,0 a 12,5
0.281 7,14 23,62 6,0 a 12,5
0.312 7,92 26,05 6,0 a 12,0
0.344 8,74 28,57 6,0 a 11,0
0.375 9,53 30,97 80 6,0 a 12,5
0.500 12,70 40,28 120 6,0 a 12,0
0.625 15,88 49,12 160 6,0 a 10,0
0.750 19,05 57,43 XXS 6,0 a 8,5
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.63
Tolerâncias dimensionais conforme norma.Outros comprimentos ou comprimentos fixos podem ser produzidos mediante consulta.
Dimentional tolerances in accordance with norm.Other lengths or fixed lengths may be manufactured on request.
6 6.625 168,3
0.188 4,78 19,28 6,0 a 12,5
0.203 5,16 20,76 6,0 a 12,5
0.219 5,56 22,31 6,0 a 12,5
0.250 6,35 25,36 6,0 a 12,5
0.280 7,11 28,26 40 6,0 a 12,5
0.312 7,92 31,33 6,0 a 12,5
0.344 8,74 34,39 6,0 a 12,5
0.375 9,53 37,31 6,0 a 12,5
0.432 10,97 42,56 80 6,0 a 12,5
0.500 12,70 48,73 6,0 a 12,5
0.562 14,27 54,21 120 6,0 a 12,5
0.625 15,88 59,69 6,0 a 12,5
0.719 18,26 67,56 160 6,0 a 13,0
0.750 19,05 70,12 6,0 a 13,0
0.864 21,95 79,22 XXS 6,0 a 12,0
0.875 22,23 80,08 6,0 a 12,0
1.000 25,40 89,51 6,0 a 12,0
8 8.625 219,1
0.250 6,35 33,32 20 5,5 a 6,3 ou 10,0 a 12,5
0.277 7,04 36,82 30 5,5 a 6,3 ou 10,0 a 12,6
0.312 7,92 41,25 5,5 a 6,3 ou 10,0 a 12,6
0.322 8,18 42,55 40 5,5 a 6,3 ou 10,0 a 12,6
0.344 8,74 45,34 5,5 a 6,3 ou 10,0 a 12,6
0.375 9,53 49,25 5,5 a 6,3 ou 10,0 a 12,6
0.406 10,31 53,09 60 5,5 a 6,5 ou 10,0 a 13,0
0.438 11,13 57,08 5,5 a 6,5 ou 10,0 a 13,0
0.500 12,70 64,64 80 5,5 a 6,5 ou 10,0 a 13,0
0.562 14,27 72,08 5,5 a 6,5 ou 10,0 a 13,0
0.594 15,09 75,92 100 5,5 a 6,5 ou 10,0 a 13,0
0.625 15,88 79,59 5,5 a 6,5 ou 10,0 a 13,0
0.719 18,26 90,44 120 5,5 a 6,5 ou 10,0 a 13,0
0.750 19,05 93,98 5,5 a 6,5 ou 10,0 a 13,0
0.812 20,62 100,93 140 5,5 a 6,5 ou 10,0 a 13,0
0.875 22,23 107,93 XXS 5,5 a 6,5 ou 10,0 a 13,0
0.906 23,01 111,27 160 5,5 a 6,5 ou 10,0 a 13,0
1.000 25,40 121,33 5,5 a 6,5 ou 10,0 a 13,0
1.130 28,70 134,75 10,0 a 12,2
1.181 30,00 139,88 10,0 a 12,2
1.252 31,80 146,87 10,0 a 12,2
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
CONDIÇÕES gERAIS: gENERAL CONDITIONS:
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
p.64 / Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
10 10.750 273,0
0.250 6,35 41,76 20 5,5 a 6,1 ou 10,0 a 12,2
0.280 7,11 46,62 5,5 a 6,2 ou 10,0 a 12,4
0.307 7,80 51,01 30 5,5 a 6,1 ou 10,0 a 12,3
0.344 8,74 56,96 5,5 a 6,1 ou 10,0 a 12,3
0.365 9,27 60,29 40 5,5 a 6,1 ou 10,0 a 12,3
0.438 11,13 71,88 5,5 a 6,2 ou 10,0 a 12,5
0.500 12,70 81,53 60 5,5 a 6,2 ou 10,0 a 12,5
0.562 14,27 91,08 5,5 a 6,2 ou 10,0 a 12,5
0.594 15,09 95,98 80 5,5 a 6,1 ou 10,0 a 12,2
0.625 15,88 100,69 5,5 a 6,2 ou 10,0 a 12,4
0.719 18,26 144,71 100 5,5 a 6,2 ou 10,0 a 12,4
0.812 20,62 128,34 5,5 a 6,2 ou 10,0 a 12,4
0.844 21,44 133,01 120 5,5 a 6,2 ou 10,0 a 12,4
0.875 22,23 137,48 5,5 a 6,2 ou 10,0 a 12,4
0.938 23,83 146,43 5,5 a 6,0 ou 10,0 a 12,0
1.000 25,40 155,10 140 10,0 a 11,5
1.125 28,58 172,27 160 8,0 a 10,4
1.250 31,75 188,90 7,0 a 9,4
12 12.750 323,8
0.250 6,35 49,73 20 5,5 a 6,1 ou 10,0 a 12,2
0.281 7,14 55,76 5,5 a 6,1 ou 10,0 a 12,2
0.312 7,92 61,70 5,5 a 6,1 ou 10,0 a 12,2
0.330 8,38 65,19 30 5,5 a 6,1 ou 10,0 a 12,2
0.344 8,74 67,91 5,5 a 6,1 ou 10,0 a 12,2
0.375 9,53 73,86 STD 5,5 a 6,1 ou 10,0 a 12,3
0.406 10,31 79,71 40 5,5 a 6,1 ou 10,0 a 12,3
0.438 11,13 85,82 5,5 a 6,1 ou 10,0 a 12,3
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.65
Tolerâncias dimensionais conforme norma.Outros comprimentos ou comprimentos fixos podem ser produzidos mediante consulta.
Dimentional tolerances in accordance with norm.Other lengths or fixed lengths may be manufactured on request.
12 12.750 323,8
0.500 12,70 97,44 XS 5,5 a 6,1 ou 10,0 a 12,3
0.562 14,27 108,93 60 5,5 a 6,1 ou 10,0 a 12,3
0.625 15,88 120,59 5,5 a 6,1 ou 10,0 a 12,3
0.688 17,48 132,05 80 5,5 a 8,8 ou 10,0 a 12,4
0.750 19,05 143,17 5,5 a 8,1 ou 9,0 a 11,0
0.812 20,62 154,17 5,5 a 7,5 ou 9,0 a 11,0
0.844 21,44 159,87 100 5,5 a 7,2 ou 9,0 a 11,0
0.875 22,23 165,33 7,0 a 10,8
0.938 23,83 176,29 7,0 a 10,0
1.000 25,40 186,92 120 7,0 a 9,5
1.062 26,97 197,43 6,0 a 9,0
1.125 28,58 208,08 140 6,0 a 8,5
1.312 33,32 238,76 160 6,0 a 8,0
14 14.000 355,6
0.312 7,92 67,90 20 5,5 a 6,1 ou 10,0 a 12,2
0.344 8,74 74,76 5,5 a 6,1 ou 10,0 a 12,2
0.375 9,53 81,33 30 5,5 a 6,1 ou 10,0 a 12,2
0.406 10,31 87,79 5,5 a 6,1 ou 10,0 a 12,2
0.438 11,13 94,55 40 5,5 a 6,1 ou 10,0 a 12,2
0.469 11,91 100,94 5,5 ou 10,0 a 11,0
0.500 12,70 107,39 XS 7,0 a 12,2
0.562 14,27 120,11 6,0 a 9,6 ou 10,0 a 12,2
0.594 15,09 126,71 60 5,5 a 8,6 ou 10,0 a 12,2
0.625 15,88 133,03 5,5 a 8,6 ou 10,0 a 12,2
0.688 17,48 145,75 5,5 a 7,9 ou 10,0 a 12,2
0.750 19,05 158,10 80 9,0 a 11,0
0.812 20,62 170,33 8,0 a 10,4
0.875 22,23 182,75 7,0 a 9,7
0.938 23,83 194,96 100 6,0 a 9,0
1.000 25,40 206,83 6,0 a 8,5
1.094 27,79 224,65 120 6,0 a 8,0
Diâmetro NominalNominal Diameter
Diâmetro ExternoOutside Diameter
Espessura de ParedeWall Thickness
PesoWeight
SChComprimento
Length
pol pol mm pol mm Kg/m m
CONDIÇÕES gERAIS: gENERAL CONDITIONS:
Tubos Trefilados a Frio / Laminados a Quente - dimensões de acordo com aNSI B 36.10Cold Drawn / Hot Rolled Tubes - Dimensions in accordance to ANSI B 36.10
Responsabilidade SocialSocial Sustainability
Vallourec / Soluções Tubulares para o Mercado de Energia - Tubular Solutions for the Energy Market / p.67
SUSTENTABILIDADE PARA A VALLOUREC É UMA ATITUDE QUE VAI ALÉM DO MEIO AMBIENTE
A Vallourec entende que o alcance da sustentabilidade só é possível por meio do equilíbrio entre uma boa gestão econômica, ambiental e social. A promoção da melhoria da qualidade de vida, os programas educacionais, culturais e os que estimulam a geração de renda são uma realidade para os empregados da Vallourec, seus familiares, prestadores de serviço, parceiros e comunidades com as quais a empresa se relaciona.Um marco importante e histórico dos investimentos realizados pela Empresa em ações sociais e culturais é a restauração do antigo Cine Theatro Brasil, um patrimônio de convivência e promoção da diversidade cultural em Belo Horizonte.Em 2006, o prédio foi adquirido pela Fundação Sidertube, entidade sem fins lucrativos mantida pela Vallourec, e após um minucioso trabalho de restauro passou a se chamar Cine Theatro Brasil Vallourec reabrindo suas portas em 2013 com a intenção de voltar a ser o espaço cultural do coração dos belorizontinos.
FOR VALLOuREC SuSTAINABILITy IS A CONCEPT ThAT gOES BEyOND ThE ENVIRONmENT
Vallourec believes sustainability is only attainable through the balance of sound economic, environmental and social management.Promoting the improvement of life quality and promoting educational, cultural and income generation programs is the reality Vallourec offers its stakeholders: employees, family members, third party employees, partners and neighboring communities.A historical landmark in Vallorec’s investiments in social and cultural actions is the restoration of the former Cine Theatro Brasil. It is a cultural heritage to the city of Belo Horizonte and a site to promote co-existence.In 2006, the building was acquired by Fundação Sidertube, a non for profit entity maintained by Vallourec. After meticulous restoration works, it opened its doors to the public again in 2013 renamed Cine Theatro Brasil Vallourec. And so Cine Theatro Brasil Vallourec once again takes its place as a cultural Center in the heart of the city for the people of Belo Horizonte.
CONTATOS ContactsTubos para condução Line Pipes:Telefone Phone: +55 (31) 3328-2000 e-mail: [email protected]
Soluções Line Pipe para aplicação Onshore e OffshoreLine Pipe Solutions for Onshore and Offshore ApplicationsTelefone Phone: +55 (21) 3873-8300e-mail: [email protected]
Tubos para Caldeiras e Trocadores de Calor Tubes for Boilers and Heat ExchangersTelefone Phone: +55 (11) 3371-6100e-mail: [email protected]
Vendas ExportaçãoExport BusinessTelefone Phone: +55 (11) 3371-6128 / +55 (11) 3371-6146 e-mail: [email protected]
www.vallourec.com/br
Top Related