TUTORIAL ALPHIMAX – INGLÊS

8/3/2019 TUTORIAL ALPHIMAX INGLS

1/9

TUTORIAL ALPHIMAX INGLS

What can you expect to see in this tool?

1. You can estimate real time, for free, any two locations in theworld.

2. AlphiMAX data-base is pre-loaded with data of multiple

Point-to-Point (P2P) microwave products and options.3. AlphiMAX data-base is pre-loaded with worldwideenvironmental parameters which are automatically being usedin your calculations for better accuracy of calculatedavailability.

4. AlphiMAX data-base is pre-loaded with high resolution terrainand Land Cover information that can be used in the estimation.

5. Between different regulatory domains we cover specificproducts and options with wide frequency range.

6. You can zoom into our world-wide map and just click on it or

find your location searching by address, we will take thecoordinates from it, so you dont have to leave the office. We

just made it easier for you.

Before you start, Prepare:

1. Global Positioning coordinates (all formats accepted) for Site A and Site B (the two sites you wish toconnect). Or be able to point the locations on our integrated map Logitudes in the Westernhemisphere and Latitudes below the equator/ South are with Negative Value - add "-" sign.

2. Height of the buildings or towers where the antenna will be located.3. Preferred frequencies for operation.

4. The expected bandwidth usage.5. Required Link availability - optional.6. Whether you wish to use integrated, external or would like to consider both antenna options.7. We recommend using one of the following WEB browsers for better experience:

o FireFox v 3.6 or higher

o Chrome v 10.0 or higher

o Internet Explorer v 8.0 or higher

Note: No need to prepare: Product, Terrain, Land Cover or Environment information.

Language Interface:

Changing you language

1. In the PTP Estimator menu, select "Account" and "Change Language".2. The following window will be opened.3. Select the Contact info tab.4. In the "Language" pull down select your preferred interface.5. Web site interface will change to your language.6. Tool interface will be changed forExpress users. Subscribe to Expresspackage to get access to this

functionality.
http://www.alphimax.com/members/ptp/http://www.alphimax.com/members/ptp/http://www.alphimax.com/members/ptp/http://www.alphimax.com/members/ptp/http://www.alphimax.com/members/ptp/


2/9

Inputs:

1. Stop your cursor on fields you are not sure about and an explanation of the field will appear.2. Select your Radio Regulatory Domain - Tx Power and Channel Bandwidth options apply per

domain.3. Enter the latitude and longitude for Site A, and Site B, (all formats accepted) or simply zoom into the

map and place the cursor at the desired location, we will extract the coordinates from the map foryou.

4. You may rename the two sites for convenience, clarity and professionalism, and to enable easyreference to the link when needed. Sites may be connected anywhere around the world.

5. Enter the height of the tower/building where the antennas will be located at each site or drag the

antenna icon up/or down.6. Select your desired Geo Source.7. Press Estimate.

It is always possible to press the DEFAULTS to revert to default settings. DEFAULTS uses the settings ofyour previous session.

Load previous work:

When returning to work on previous project, select the Projects tab. Load previous sites to continueworking from were you left it. Save, delete or rename projects for future reference.

During your session it is also possible to reload a project that was created in the last session from theCurrent session histroy on the left hand side of the screen.

Inputs - Initial Filter (must hit APPLY FILTERto take effect):

The initial filter is designed to support you in two ways:


3/9

1. Reduce estimation time by narrowing down the search to a predetermined set of parameters such asmanufacturer, regulatory domain, Duplex system (FDD/TDD) or frequency band(s). A pie graph onthe right hand side will be updated on the fly as you change your selection.

2. Narrow your search based on predefined Key Performance Indicators (KPI) such as desiredavailability, capacity or additional fade margin.

Availability:

1. Select yearly availability target (e.g. 99.99999%) to receive only results that meet your criteria.2. Later, it is possible to sort by availability - click on the availabilty header in the results list.

Fade Margin: In order to ADD fade margin in addition to the availability:

1. Check the Fade Margin box.2. Switch to manual mode to dictate a required fade margin.3. Unless changed, the tool will calculate and apply a minimal fading based on the distance and the

frequency. In some cases certain product configuration options may not be available as the fade

margin prevents them from being a valid choice.4. When link configuration option is selected, in the Selected tab it is possible to find the calculated

fade margin before the link drops to one lower modulation, the minimum required fade margin andthe chosen one for the selected product.

Inputs through the maps:

1. Switch to the map tab and use the map button to see the following view.2. Zoom out using the bar on the left until you see the location area you want.3. Right Click on the map to be able to "move site A here", and repeat for site B.4. Now that you are in the area you can zoom in and fine tune your location selection.5. We use the coordinates from the map, you can stay in your seat.6. You can use that functionality and then switch to 3D mode, locations will transfer.


4/9

1. Using an interactive 3D map, zoom into your preferred location, input your site location by draggingand drooping the sign A or B.

2. The antenna heights and the coordinates on the top are fully synchronized with the map, so changeson one will take effect on the other in real time (Check Auto Re-Position).

3. See if you have limitations on your line of site using the 3D mode.4. Use Shift + arrows to circle around and change the view angle of your link.5. Use Ctrl+ arrows to look at the area of your site and into the horizon.6. The 3D line doesn't represent the "Fresnel zone", the upper line connects your antennas, the blue

area connects the bottom of your towers.

Search by address

1. Select the search by address button to switch to that mode.2. Insert the address desired and hit enter.3. Then assign to site (A or B) icon will be colored red.4. Click on that icon to assign.5. See your blue dot on the map becomes red as the site receives the coordinates.

Determine your Geo Source

Based on your desired resolution of terrain and land cover information, select the applicable Geo Source

from the drop down menu. Then hit estimate to take into account that Geo Source in your estimation. Theland cover information for the given link is provided instantly to your path profile analysis.

Keep in mind that when you select non-free option, a $ sign will show up to the right of the drop down menuto remind you that credits are being deducted from your balance each time you hit the button Estimate. Thenumber of credits deducted may vary based on the selected resolution which can change from territory toterritory.


5/9

Analyzing your link

On the left hand side of the map tab you will find several tools, some will require Express level membership.GE MKZ will become active after Estimate. Remember to return to the map tab after your estimation.

Distance On the fly distance between your sites

Center Map Center the map on the current link

Auto Re-positionAutomatically reposition and zoom the map on the link upon changes ofcoordinates positions.

GE KMZObtain link in KMZ file for offline 3D view (in Google Earth) -available after estimation

Site A View 3D view from site A

Site B View 3D view from site B

Site A Tour 3D 360 degrees tour around Site A

Site B Tour 3D 360 degrees tour around Site B

Fly the Path 3D flight of the RF Path

Street A Check your site A using street view (from street level) in 3D View

Street B Check your site B using street view (from street level) in 3D View

Integrated Street View - see what is near your link.


6/9

Preferences

1. All your preferences can be saved and will be loaded next time you log in.2. You can save almost all of the presented input options on the screen as your preferences in the

"preference" section.3. Your map will be pointing to your preferred area next time you load it, if you hit save preferences

while in your preferred location.4. You may select the measurement units type, either Imperial or metric and all relevant input and

output parameters will be formatted with meters/kilometers or ft/miles respectively.5. Also will be saved Auto Re-Positioning status of map, and more.

Profile

Make changes to your profile through the update profile option on the left hand side.

See your package status with AlphiMAX, review account status, activity log and more.

Outputs:

Visual Graphics

Link Path Profile

1. Line of Sight - the black line of the link graphic shows the line-of-sight connecting the two sites.2. The green area of the link graphic shows the 60% Fresnel Zonefor all the supported frequencies

available in the selected regulatory domain. A red area will appear if the Fresnel zone is obstructed,the link could not be established, and details regarding the reason can be found under theLimitations tab.

Azimuth & Tilt

1. The azimuth (bearing) of each site is displayed in compass like graphical representation and withtextual format. Two values are available, true and magnetic bearing where the later uses the magneticinclination for the particular location.

2. The required vertical tilt is automatically calculated and graphed, where negative value suggestsdown-tilt and positive refers to up-tilt.

3. Use the parameters provided for each of the sites when installing the antennas.

Height per Site

1. AntH refers to the Antenna Height obtained from the input you selected.2. Alt is the actual terrain altitude above mean sea level.3. Elev provides the total elevation of the antenna above mean sea level (altitude + antenna height).
http://en.wikipedia.org/wiki/Fresnel_zonehttp://en.wikipedia.org/wiki/Fresnel_zonehttp://en.wikipedia.org/wiki/Fresnel_zone


7/9

Visual Graphics with Land Cover, Path Position Details and Synchronized map

Starting with version 1.8 it is possible to receive Path Profile Details and Analyze Potential Obstructions aspart of the Selecting Mode category. Scroll your mouse over the path profile and the details will be updatedon the fly in the orange window to your left. Information will include earth elevation for any point in your

path, elevation of land which can include the land cover information, the land cover type and the Fresnelzone clearance.

Click on potential obstructions and the map below will be synchronized. Be able to zoom on yourobstruction in 3D using the map below.

Notice in the picture below that the Land Cover is overlaid on top of the terrain information. The cursor lineis marking the distance 3.3 miles from site A. The Path Profile Details for that location are shown to the leftwhile the map is pointing at the specific corresponding coordinates.

Results

1. Results are populated with all possible product variation for the inputs provided and sorted accordingto the maximum bi-directional Layer2 (usually Ethernet) throughput.

2. Total estimated configuration options are listed on the right.3. Additional filters can be applied to minimize the list based on Manufacturer, Product Family ,

Frequency Band, Antenna type and Channel Bandwidth. Press on the filter button to clear all filtersand return to the complete list. Note that some of the filter parameters are mutually exclusive and thedata may be an empty list. The amount of filtered option results are automatically summerized basedon the filter selection.

4. Information about the product manufacturer, frequency band, maximum achievable bi-directionallayer 2 throughput, channel bandwidth, link yearly availability , and product family is available perline option.

5. It is possible to obtain full technical details about the specific option by clicking on the product'sline.


8/9

Limitations

1. View any known limitations for the specific site coordinates, such as minimum recommendedantenna heights, recommended calculated fade margin for the band and distance, terrain, Fresnelzone per frequency and more, in the limitation tab.

2. Link Path limitation when terrain data is unavailable or the fresnel zone is obstructed.

Selected

1. Receive full technical information about the product, antennas and link budget when directed to thistab.

2. See local environmental information data that was used in your estimation.3. It is possible to select a "Print Preview" to prepare a ready to print complete summary and details.4. It is possible to request a quote for your product once you selected one. AlphiMAX would send your

information to one of the partners we have based on your territory and product you requested.

It is always possible to toggle between the different tabs, for example modify a preference and estimateagain.

Maps

Your link is also available on the map tab to be viewed in 3 dimensions. It is possible to get detailed 3Dinformation, including street view integration just below the path profile such that it makes it easier to seeyour link conditions. See if your link is going through buildings or even trees wherever data is available.


9/9

Get a quote

1. We don't sell product, however we can connect you to a local partner that can offer the selectedproduct in your territory.

2. If you would like to get a quote for product, installation or other select the "get quote" button once onthe selected tab.

3. Enter your contact information.4. Select how we should match you with a partner, will it be based on your contact or shipping

information or maybe your coordinates.5. Our database would match a partner that serves your territory and carry your preferred product.6. An introductory e-mail will be sent to you and to our partner.7. There is no cost or commitment on your side.8. Please don't request a quote if you don't wish to be contacted by one of our partners!

Exporting to Google Earth (offline use)

1. After your estimate, return to the Map tab and look for the GE KMZ button. Either save the file forlater or open it to view your location.

2. A button to download and install the Google Earth software is also provided for your convenience, ifyou dont have this free software already installed.

3. Once the file is loaded, double-click on the sites to see the signals path through the landscape and therelative heights of the sites.

TUTORIAL ALPHIMAX – INGLÊS

Documents

Transcript of TUTORIAL ALPHIMAX – INGLÊS