Express Line - Para mais informações contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93...
-
Upload
perfectool -
Category
Documents
-
view
219 -
download
0
Transcript of Express Line - Para mais informações contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93...
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
1/8
IN-STOCK SUPERABRASIVE TOOLING
Setting the global standards for Superabrasive Tooling
abrasivetechnology
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
2/8
PBS
QUALI
S
I
NCE 197
1
2
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
WELCOME TO ABRASIVE TECHNOLOGYS UK
EXPRESS LINE CATALOGUE
This catalogue is a listing of standard products we carry in stock for next
day delivery. In addition to the products listed on these pages, we have
experienced Customer Service associates and Technical Specialists ready
to assist you in determining the best tool for your needs.
If you do not find what you need within these pages, please call us at
020 7471 0200. For information about our Company and its resources
available to you, visit our Web Site at www.abrasive-tech.com or email
your name and number to us and well contact you!
Some basic information regarding our products:
ELECTROPLATED
In addition to the in-stock tools on pages 3 & 4, Abrasive Technology
manufactures a complete line of custom engineered Electroplated tools.
Our electroplating processes and equipment can produce extremely
complex forms with close tolerances. We also have the necessary
equipment to measure and document these precision capabilities.
Recommended usage for Electroplated products:
Low wheel speed is one of the major causes of poor performance in
superabrasive grinding. Low speeds will cause loading and excessive
heat build-up. We recommend that our products operate in the range
of 25 to 60 M/S. 46 M/S is optimum. To prolong wheel life, use
adequate coolant whenever possible.
RESIN
Abrasive Technology manufactures a complete line of Resin Bond
wheels for a wide spectrum of grinding applications. Our Resin Bond
wheels are made using the highest quality superabrasive and raw mate-
rials to ensure superior performance. The wheels presented in this cata-
logue are designed to satisfy the basic needs of tool room grinding
applications, where a cost effective wheel is required for sharpening car-
bide tipped tools. In addition, we have experienced Technical Specialistsand the equipment necessary to design and manufacture wheels to suit
your specific needs.
TOOLING
A wide range of bespoke PCD and PCBN tooling is also produced by
Abrasive Technology, together with the complete spectrum of natural
diamond cutting and dressing tools. The range includes PCD combina-
tion tooling for machining nonferrous materials and PCD wear parts for
use in the Bearing industry.
You will find in this catalogue a range of single point Diamond Dressers
and PCD tipped ISO inserts. Our Technical Specialists are available to
provide solutions to your specific requirements.
. . . . . . . . . . . . . . . . . . . . . . .
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
3/8
To order any of these products call:020 7471 0200 *We endeavour to despatch all orders received by noon on the same working day.www.abrasive-tech.com
3
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
CONTINUOUS RIM SAWS
FOR FIBREGLASS
ROUTER
160mm files
80mm abrasive length
ELECTROPLATED
NEEDLE FILES
Shape Grit Size Part No.
Flat (5pk) D126 SY720019N
Half Round (5pk) D126 SY720021N
Three Square (5pk) D126 SY720026N
Square (5pk) D126 SY720023N
Round (5pk) D126 SY720025N
Mixed (5pk) D126 SY720150N
Head Shank GritDia. Length Shank Length Size Part No.
6mm 25mm 6mm 50mm D427 SY200013N
Blank Grit
Dia. Width Bore Size Part No.
100mm 1mm 3/4 D427 SY330130N
100mm 1mm 20mm D427 SY330131N
Fits all standard saws 20mm bore (can be customised to your requirements)
LASER WELDED SAW BLADES
Dia. Application Part No.
12 inches Concrete SY990096N
12 inches Asphalt SY990097N
9 inches Multi-purpose SY990098N
5 inches Multi-purpose SY990099N
4 1/2 inches Multi-purpose SY990100N
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
4/8
To order any of these products call:020 7471 0200 *We endeavour to despatch all orders received by noon on the same working day.www.abrasive-tech.com
4
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
ELECTROPLATEDDYCLADS
For off-hand grinding For faster, cooler cutting Clean non-residual grinding
GritDia. Width Bore Size Part No.
6 1 1 1/4 Coarse SY400056N6 1 1 1/4 Medium SY400051N
6 1 1 1/4 Fine SY400078N
6 3/4 1 1/4 Coarse SY400027N
6 3/4 1 1/4 Medium SY400026N
6 3/4 1 1/4 Fine SY400038N
SIDE SPOKED SAWS
FOR FIBREGLASS
Blank GritDia Width Bore Size Part No.
100mm 1mm 3/4 D427 SY330132N
100mm 1mm 20mm D427 SY330133N
1A1 DYCLAD
Face GritDia. Width Bore Size Part No.
6 1 1 1/4 Coarse SY410011N
6 1 1 1/4 Medium SY410032N
6 1 1 1/4 Fine SY410033N
6A2 DYCLAD
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
5/8
To order any of these products call:020 7471 0200 *We endeavour to despatch all orders received by noon on the same working day.www.abrasive-tech.com
5
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
2 ranges - economy and superior application
For dressing straight grinding wheels and simple profiles Consumable
TOOLING
SINGLE POINT DRESSERS
Shank Carat Size Economy Part No. Superior Part No.
3/8 x 3 1/4 CN240001N CN240007N
3/8 x 3 1/3 CN240002N CN240008N
1/2 x 3 1/2 CN240003N CN240009N
1/2 x 3 3/4 CN240004N CN240010N
1/2 x 3 1 CN240005N CN240011N
1/2 x 3 2 CN240006N CN240012N
3/8 x 3 1 CN240013N CN240014N
ISO No. Part No.
CPMW120408 CL180000N
TPGN160304 CL180001N
DCMT11T304 CL180002N
VBMW160404 CL180003N
The benefits of polycrystalline diamond (PCD) over carbide are many. Tool life Surface finish Down time Value for money Product consistency
Superior edge condition
PCD TIPPED ISO INSERTS
Abrasive Technology can manufacture the full range of PCD tippedISO inserts. The following are held in stock.
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
6/8
To order any of these products call:020 7471 0200 *We endeavour to despatch all orders received by noon on the same working day.www.abrasive-tech.com
6
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
RESIN BOND WHEELS
Express Line wheels are designed for general purposecarbide and steel grinding.
For additional products and information, please call ourCustomer Service group or refer to our Resin Bond diamond
and CBN catalogue.
DIAMOND GRINDING WHEELS
Wheel Size (mm) Grit Con Depth Part No.
120 751.6mm SR290258N
3.2mm SR290259N
95 x 38 x 31.75 150 751.6mm SR290260N
3.2mm SR290261N
180 751.6mm SR290262N
3.2mm SR290263N
1201.6mm SR290264N
753.2mm SR290265N
125 x 45 x 31.75
1.6mm SR290266N
150 75 3.2mm SR290267N
180 1001.6mm SR290268N
3.2mm SR290269N
100
100 3.2mm
SR300211N150 x 20 x 31.75
150 SR300212NW = 5mm
220 SR300213N
100 SR300214N150 x 20 x 31.75 150
100 3.2mmSR300215N
W = 9.5mm220 SR300216N
100 x 6.5 x 31.75120
100 3.2mmSR010524N
180 SR010525N
150 x 12.5 x 31.75120
100 3.2mmSR010526N
180 SR010527N
150 x 6.5 x 31.75 120 100 3.2mm SR010528N180 SR010529N
Note:
To maximize wheel life and productivity, Resin Bond superabrasivewheels should be operated within a range of 18 to 36 M/S, using anadequate coolant flow. Maximum in-feed depths of .002 per pass arerecommended and Resin Bond wheels must be running true before use.Occasional dressing will enhance wheel performance.
11V9 Wheel Size (mm) Grit Con Depth Part No.
150 x 9.5 x 31.75120
100 3.2mmSR010530N
180 SR010531N
175 x 12.5 x 31.75120
100 3.2mmSR010532N
180 SR010533N
175 x 6.5 x 31.75120
100 3.2mmSR010534N
180 SR010535N
175 x 9.5 x 31.75120
100 3.2mmSR010536N
180 SR010537N
100 x 1 x 31.75 120 100 6.5mm SR020045N
125 x 1 x 31.75 120 100 6.5mm SR020082N150 x 1 x 31.75 120 100 6.5mm SR020046N
150 x 1.1 x 31.75 120 100 6.5mm SR020047N
150 x 1.5 x 31.75 120 100 6.5mm SR020048N
1201.6mm SR210233N
150 x 20 x 31.7575
3.2mm SR210234NW = 20mm
1501.6mm SR210235N
6.5mm SR210236N
12A2
1A1
DIAMOND GRINDING WHEELS (cont.)
1A1
1A1R
6A2C
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
7/8
Item Part No.
Centrifugal Braking - For general purpose use CN220003N
Air Driven - For large and very small diameter wheels CN220002N
Replacement Wheels 60 SIC (5 pk) (medium) CN220007N
To order any of these products call:020 7471 0200 *We endeavour to despatch all orders received by noon on the same working day.www.abrasive-tech.com
7
I N S T O C K P R O D U C T S - S A M E D A Y D E S P A T C H *
ROTATRIM DEVICES
FOR DRESSING AND
TRUEING
Custom Products Available
For a fast, easy and cost effective way to restore, dress and true
Diamond & CBN wheels.
Wheel Size (mm) Grit Con Depth Part No.
1.6mm SR290250N
95 x 38 x 31.75
100 753.2mm SR290251N
150 751.6mm SR290252N
3.2mm SR290253N
125 x 38 x 31.75
100 751.6mm SR290254N
3.2mm SR290255N
150 751.6mm SR290256N
3.2mm SR290257N
150 x 6.5 x 31.75 150 75 1.6mm SR010522N
175 x 9.5 x 31.75 150 75 3.2mm SR010523N
11V9
1A1
CBN GRINDING WHEELS
(For more information, please contact our Customer Service department at
020 7471 0200)
11V9 Wheel Size (mm) Grit Con Part No.
90 x 3 x 10 x 31.75
100 75 SR290072N
150 75 SR290246N
90 x 2 x 10 x 31.75
120 50 SR290276N
150 50 SR290294N
11V9 PROJECT 1 WHEELS (Dry grinding, Free standing rim wheels)
RESIN BOND WHEELS(cont.)
-
8/9/2019 Express Line - Para mais informaes contacte-nos pelos telefones 239 095 985 / 91 1111 516 / 93 750 45 47 / 96
8/8
Express Line is a USA registered trademarkRotatrim is a trademark of Abrasive Technology
Copyright 2001 Abrasive Technology, Inc. Printed 6/01 Rev2
DELIVERY
All items in this catalogue are in stock. We endeavour to
despatch all orders received by noon on the same working
day.
TERMS
All prices are exclusive of VAT. MasterCard, Visa, AmericanExpress or net 30 days with approved credit. All prices are ex-
works. Distribution discounts apply (for full range of distribution
discounts please call our Marketing Department on +44
(0)1543 441000). All carriage and related charges will be
added to the invoice. There is a minimum order requirement
of 25.00, . 40.00.
ADDITIONAL PRODUCTS
We manufacture a full range of Diamond and CBN,
Electroplated,Metal Bond, Resin Bond, and Vitrified Bond
grinding wheels, as well as a full range of Diamond, PCD and
PCBN Tooling.
CUSTOM ENGINEERED TOOLING
We welcome the opportunity to work together to meet your
specific requirements. When requesting quotes, please
forward complete drawings and specifications to our
experienced Customer Service department.
World headquarters in Lewis Center, Ohio USA
abrasive technologyWORLD HEADQUARTERS EUROPEAN HEADQUARTERS ASIAN HEADQUARTERS
Abrasive Technology, Inc. Abrasive Technology Ltd. Abrasive Technology Asia Pacific Pte. Ltd.8400 Green Meadows Dr. Roxby Place Fulham, London Blk 1093 Lower Delta Rd. 05-11/13P.O. Box 545 SW6 1RT United Kingdom Tiong Bahru Industrial EstateLewis Center, Ohio 43035 USA Ph: 44.20.7471.0200 Singapore 169204Ph: 1.740.548.4100 Fax: 44.20.7471.0202 Ph: 65.6270.6878Fax: 1.740.548.7617 0800.316.3311 (UK) Fax: 65.6270.6877
www.abrasive-tech.com
10 LOCATIONS WORLDWIDE