Catalogo de Arames Tubulares (Hyundai)

7/28/2019 Catalogo de Arames Tubulares (Hyundai)

http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 1/25

FLUX CORED WIREFLUX CORED WIRE



163

FLUX CORED WIRE

SF-71 AWS A5.20 / ASME SFA5.20 E71T-1

JIS Z3313 YFW-C50DR

All position welding of building, shipbuilding, bridges, machinery and vehicles.

Applications

Characteristics on Usage

Notes on Usage

DC

Welding Position (All-Position) Current

CO2

Shielding Gas

Dia. (mm) 1.0 1.2 1.4 1.6 Spool (kg) 5 12.5 15 20(in) .039 .045 .052 1/16 (lbs) 11 28 33 44

Ball Pac

KR, ABS, LR, BV, DNV, GL,NK, TÜV, CWB, Ü-SIGN,CCS, CRS

Approval Packing (lncluding Ball Pac)

Sizes Available and Recommended Currents (Amp.)

Size mm (in)

F & HF

V-up, OH

V-down

1.2 (.045) 1.4 (.052) 1.6 (1/16)

120~300 200~400 200~450

120~260 180~280 180~280

200~300 220~320 250~300

SF-71 is a titania type flux cored wire for all position welding with CO 2. Compared with solidwire, spatter loss is low, bead appearance is beautiful and arc is soft with good stability. Slagcovering is uniform with good removal.

Proper preheating(50~150°C)(122~302 ) and interpass temperature must be used in order torelease hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.One-side welding defects such as hot cracking may occur with wrong welding parameter suchas high welding speed.Use 100% CO2 gas

Refer to page 168 for storage instructions.

Typical Chemical Composition of All-Weld Metal (%)

C Si Mn P S

0.04 0.49 1.29 0.010 0.009

Typical Mechanical Properties of All-Weld Metal

Y.S T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs)

548 (79,600) 582 (84,500) 28 0 (32) 86 (64)



171

FLUX CORED WIRE

170

FLUX CORED WIRE

SC-71MSR AWS A5.20 / ASME SFA5.20 E71T-12MJ

Oil and gas construction, pipe, and off-shore structures.

Applications


Notes on Usage

Dia. (mm) 1.2 Spool (kg) 12.5 15 20(in) .045 (lbs) 28 33 44

Ball Pac

ABS. BV, DNV, LR



Size mm (in)

F & HFV-up, OH

V-down

1.2 (.045)

200~390180~250

210~280

SC-71MSR is titania type flux cored wire for all position welding. It provides excellent notchtoughness at low temperature, not only as-welded but also stress relieved state.All position welding can be achieved with excellent flat bead appearance, less spatter, and easyslag removal and high welding current in vertical up position can be performed.

Proper preheating (50~150°C)(122~302 ) and interpass temperature must be used in orderto release hydrogen which may cause crack in weld metal when electrodes are used formedium and heavy thick plates.One-side welding defects such as hot cracking may occur with wrong welding parameter,such as high welding speed.Use Ar+20~25% CO2 gas for weldingRefer to page 168 for storage instructions.


Y.S T.S EL. Charpy V-NotchN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) -40 (-40 ) -50 (-60 )

As welded 542 (78,620) 577 (83,620) 30.0 115 (88) 88 (65)P.W.H.T

523 (75,760) 552 (80,047) 33.0 101 (75) 78 (58)(620°C 2hr)


C Si Mn P S Ni0.06 0.35 1.24 0.012 0.012 0.45

SC-71SR AWS A5.20 / ASME SFA5.20 E71T-9J

JIS Z3313 YFW-C502R

Oil and gas construction, pipe and off-shore structures

Applications


Notes on Usage

DC

Welding Position (All-Position) Current

CO2

Shielding Gas

Dia. (mm) 1.2 1.4 Spool (kg) 12.5 15 20(inch) 0.045 0.052 (lbs) 28 33 44



Size mm (in)

F & HFV-up, OH

V-down

1.2 (0.045) 1.4 (0.052)

120~300 150~350120~260 140~270

200~300 220~320

SC-71SR is titania type flux cored wire for all position welding for use with CO 2 gases. Itprovides excellent notch thoughtness at low temperature, not only as-welded also stress relievedstate.

Used with 100%CO2


C Si Mn P S Ni0.05 0.49 1.33 0.011 0.014 0.38


Y.S T.S EL. Charpy V-notchN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%)

-30 -22 -40 -40

600(87,000) 620(90,000) 25.0 115(85) 80(59) As welded550(79,900) 580(84,200) 28.0 84(62) 50(37) PWHT(620°C@2hr)



181

FLUX CORED WIRE

180

FLUX CORED WIRE

SC-EG2 Cored AWS A5.26 / ASME SFA5.26 EG70T-2

JIS Z3319 YFEG-22C

Vertical-up butt welding of side shell and various inner structures of ships, plates of storage tanks,and web members of box-girders of bridges.

Applications


Notes on Usage

DC

Welding Position Current

CO2

Shielding Gas

Dia. (mm) 1.6 Spool (kg) 15 20(in) 1/16 (lbs) 33 44

Ball Pac

KR, ABS, BV, DNV, GL, LR,NK, CCS



Size mm (in)

V-up

1.6 (1/16)

330~420

SC-EG2 cored is a small diameter flux cored wire to be used with CO 2 shielding gas forelectrogas arc welding high speed. The arc is extremely stable and has a good bead appearance. Itprovides highly efficient welding by electro gas process.

Use 100% CO2 gas.Refer to page 168 for storage instructions.


C Si Mn P S Mo

0.08 0.30 1.45 0.016 0.013 0.12



510 (74,000) 560 (81,300) 27 -20 (-4) 60 (44)

Supercored 81 AWS A5.29 / ASME SFA5.29 E81T1-Ni1

JIS Z3313 YFW-C602R

All position welding for construction machinery, bridge structures and storage tanks.

Applications


Notes on Usage

DC


CO2

Shielding Gas

Dia. (mm) 1.2 1.4 1.6 Spool (kg) 15 20(in) .045 .052 1/16 (lbs) 33 44

Ball Pac

CWB



Size mm (in)

F & HF

V-up, OH

V-down

1.2 (.045) 1.4 (.052) 1.6 (1/16)

250~300 260~320 290~350

180~230 200~260 220~280

250~310 260~320 280~340

Supercored 81 is all position flux cored wire designed for 100% CO2 shielding. You can get asmooth arc, and low spatter, good weldability. The weld metal impact value at -30°C( ) isexcellent and has a good bead appearance, slag covering is uniform and easy to remove.

Proper preheating(50~150°C)(122~302 ) and interpass temperature must be used in order to

release hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.One-side welding defects such as hot cracking may occur with wrong welding parameter suchas high welding speed.Use 100% CO2 gas.Refer to page 168 for storage instructions.


C Si Mn P S Ni

0.03 0.35 1.25 0.011 0.012 0.95



570 (82,700) 640 (92,900) 25 -30 (-22) 90 (66)



189

FLUX CORED WIRE

188

FLUX CORED WIRE

SC-80D2 AWS A5.28 / ASME SFA5.28 E80C-G

JIS Z3318 YFM-G

SC-80D2 can be used on high strength steel and low alloy steels in heavy industry and structuralsteel.

Applications


Notes on Usage

DC+


Ar+20~25% CO2

Shielding Gas

Dia. (mm) 1.2 1.4 1.6 Spool (kg) 12.5 15 20(in) .039 .045 1/16 (lbs) 28 33 44

Ball Pac



Size mm (in)

F & HF

1.2 (.045) 1.4 (.052) 1.6 (1/16)

200~310 200~340 230~360

SC-80D2 is a metal-cored gas shielded cored wire which combines the high deposition rates of aflux cored wire with the high efficiencies of a solid wire. SC-80D2 is equivalent to ER80S-D2solid wire.Provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage.

It is designed for use with Ar + 20~25% CO2

Refer to page 168 for storage instructions.


C Si Mn P S Mo

0.05 0.60 1.65 0.012 0.018 0.51



590 (85,600) 660 (95,700) 28 -20 (-4) 70 (52)

Supercored 1CM AWS A5.28 / ASME SFA5.28 E80C-G

JIS Z3318 YF1CM-G

Supercored 1CM can be used on 1.25%Cr-0.5%Mo steel. Recommended for welding of steam boilerplate and high temperature steel.

Applications


Notes on Usage

DC+

Welding Position(All-Position) Current

Ar+20~25% CO2

Shielding Gas

Dia. (mm) 1.0 1.2 Spool (kg) 12.5 15(in) .039 .045 (lbs) 28 33



Size mm (in)

F & HF

1.0 (.039) 1.2 (.045)

150~300 200~310

Supercored 1CM is a metal cored wire which combines the high deposition rates of F.C.W withthe high efficiencies of a solid wire. Provide exceptionally smooth and stable arc, low spatter andminimal slag coverage.

Proper preheating(130~165°C)(122~302 ) and interpass temperature must be used in orderto release hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.Keep the distance between tip and base metal at about 15mm.Use Ar+20~25% CO2 gas.Refer to page 168 for storage instructions.


C Si Mn P S Cr Mo

0.07 0.39 0.81 0.011 0.015 1.25 0.51


Y.S T.S EL. Temp. CVN-Impact Value Heat TreatmentN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs) ( /hr)

560 (81,300) 630 (91,000) 20 0 (32) 90 (66) 620/1hr510 (74,100) 600 (87,100) 25 0 (32) 110 (81) 620/8hr



193

FLUX CORED WIRE

192

FLUX CORED WIRE

SW-308L Cored AWS A5.22 / ASME SFA5.22 E308LT1-1/-4

JIS Z3323 YF308LC

SW-308L Cored is designed for welding of 18%Cr-8%Ni stainless steels.

Applications


Notes on Usage

DC+


CO2

Ar+20~25% CO2

Shielding Gas

Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33

ABS, LR, NK, BV, DNV,TÜV, CWB, Ü-SIGN, DB



Size mm (in)

F & HF

V-up OH

0.9 (.035) 1.2 (.045) 1.6 (1/16)

130~190 180~220 250~290

100~140 120~160 -

SW-308L Cored is a flux cored wire for all position welding to be used with CO2 or Argon + CO2

mixed shielding gases. This wire benefits from a fast freezing slag system which assist theoperator when welding out of position and performs equally as well when welding in the flat andhorizontal position.

Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.

Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100%CO2)

C Si Mn P S Cr Ni

0.03 0.65 1.45 0.025 0.010 19.5 10.0

Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% CO2)

T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)

590 (85,600) 45 -20 (-4) 60 (44)

SC-91B3 AWS A5.29/ ASME SFA5.29 E91T1-B3

SC-91B3 can be used for welding of 2.25%Cr-1.0%Mo steel used for super heat tubes and steampipes of boilers for electric power plant and marine use, equipment for oil refining industries andhigh temperature synthetic chemical industries.

Applications


Notes on Usage

DC+


CO2

Shielding Gas

Dia. (mm) 1.2 1.4 1.6 Spool (kg) 15(in) .045 .052 1/16 (lbs) 33


SC-91B3 is a titania type flux cored wire for all position welding. Arc stability is excellent.Spatter loss is low and slag covering is uniform with good removability.

Used 100% CO2 gas.All position gas shielded flux cored wire


C Si Mn P S Cr Mo

0.063 0.47 0.83 0.022 0.017 2.32 0.99


Y.S T.S EL.PWHTN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%)

643 (93,300) 730 (106,000) 20 690 15 1Hr


Size mm (in)

F

HF

V-up&OH

V-Down

1.2 (0.045) 1.4 (0.052) 1.6 (1/16)

250~300 280~350 300~450

250~300 280~350 300~450

200~260 220~260 240~280

250~300 280~350 300~450



197

FLUX CORED WIRE

196

FLUX CORED WIRE

SW-316L Cored AWS A5.22/ASME SFA5.22 E316LT1-1/-4

JISZ3323 YF316LC

SW-316L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo stainless steel orfor the welding of dissimilar joints of stainless steel.

Applications


Notes on Usage

KR, ABS, LR, BV, DNVGL, TÜV ,CWBÜ-SIGN, DB



mixed shielding gases. Due to ferrite content in the weld metals austenitic structure, it has excellentcrack resistance.


Size mm (in)

F & HF

V-up, OH



DC+ CO2

Ar+20~25% CO2

Welding Position Current Shielding Gas

Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100% CO2)

C Si Mn P S Cr Ni Mo

0.03 0.70 1.20 0.025 0.010 18.0 12.0 2.50



590 (85,600) 40 -20 (-4) 50 (37)

0.9 (.035) 1.2 (.045) 1.6 (1/16)

130~180 180~220 250~290

100~140 120~160 -

SW-309MoL Cored AWS A5.22 / ASME SFA5.22 E309LMoT1-1/-4

JIS Z3323 YF309MoLC

Main uses are for the applications of resistance to heat and corrosion and for the joining of stainlesssteels to mild or low alloy steel.

Applications


Notes on Usage

CWB


SW-309MoL Cored is designed for the welding of 22%Cr-12%Ni-2.5%Mo stainless steels. Thiswire has excellent crack resistance combined with good arc characteristics for the use of downhandand vertical up.


Size mm (in)

F & HF

V-up, OH


Ball Pac

Approval Packing (lncluding Ballpac)

DC+ CO2

Ar+20~25% CO2


Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100% CO2)


0.03 0.70 1.20 0.025 0.010 22.5 12.5 2.5



690 (100,000) 32 -20 (-4) 40 (33)

0.9 (.035) 1.2 (.045) 1.6 (1/16)

130~180 180~220 250~290

100~140 120~160 -



199

FLUX CORED WIRE

198

FLUX CORED WIRE

SW-347 Cored AWS A5.22/ASME SFA5.22 E347T1-1/-4

JIS Z3323 YF347C

Main uses are for the welding of stainless steel boilers and gas turbines.

Applications


Notes on Usage


SW-347 Cored is a titania type flux cored wire designed for welding of 347 and 321 type stainlesssteels.


Size mm (in)

F & HF

V-up, OH

Dia. (mm) 1.2 1.6 Spool (kg) 5 12.5 15(in) .045 1/16 (lbs) 11 28 33


DC+ CO2

Ar+20~25% CO2


Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)

C Si Mn P S Cr Ni Nb

0.04 0.80 1.20 0.025 0.010 19.5 10.0 0.40

Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)


610 (88,500) 45 -20 (-4) 60 (44)

1.2 (.045) 1.6 (1/16)

180~220 250~290

120~160

SW-317L Cored AWS A5.22/ASME SFA5.22 E317LT1-1/-4

JIS Z3323 YF317LC

SW-317L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo and 19%Cr-13%Ni-3%Mo stainless steel.

Applications


Notes on Usage



mixed shielding gases. Due to ferrite content in the weld metals austenitic structure, it has excellentcrack resistance.


Size mm (in)

F & HF

V-up, OH



DC+ CO2

Ar+20~25% CO2




0.03 0.70 1.20 0.025 0.010 19.0 13.0 3.5



600 (87,000) 35 -20 (-4) 40 (30)

0.9 (.035) 1.2 (.045) 1.6 (1/16)

130~180 180~220 250~290

100~140 120~160 -



203

FLUX CORED WIRE

202

FLUX CORED WIRE

Supercored 309L AWS A5.22/ASME SFA5.22 E309LT0-1/-4

JIS Z3323 YF309LC

Supercored 309L is designed for the welding of dissimilar metals such as s tainless steel and carbonsteel or stainless steel and low alloy steels.

Applications


Notes on Usage

TÜV, Ü-SIGN, DB,CWB


Supercored 309L which contains a high ferrite level in its austenitic structure has excellent heat andcorrosion resistibility. It has a good stable arc and excellent slag removal properties.


Size mm (in)F & HF



DC+ CO2

Ar+20~25% CO2



C Si Mn P S Cr Ni

0.03 0.70 1.50 0.025 0.010 23.5 12.5



600 (87,000) 35 -20 (-4) 50 (37)

0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300


JIS Z3323 YF308LC

Supercored 308L is designed for use in petrochemical processing, textile industries and can be usedfor welding 18%Cr-8%Ni stainless steel.

Applications


Notes on Usage



Supercored 308L for welding stainless steel has a rapid solidifying slag which enables flat andhorizontal position welding. It gives a stable arc and low spatter.


Size mm (in)F & HF



DC+ CO2

Ar+20~25% CO2



C Si Mn P S Cr Ni

0.03 0.70 1.50 0.025 0.010 19.5 9.5



600 (87,000) 43 -20 (-4) 60 (44)

0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300



205

FLUX CORED WIRE

204

FLUX CORED WIRE


JIS Z3323 YF316LC

Supercored 316L is designed for the welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel orfor the welding of dissimilar joints of stainless steel.

Applications


Notes on Usage



Supercored 316L gives good arc stability and easy slag removal due to its low carbon content. Ithas excellent resistance against granular corrosion.


Size mm (in)

F & HF



DC+ CO2

Ar+20~25% CO2




0.03 0.70 1.40 0.025 0.010 18.0 12.0 2.5



590 (85,600) 40 -20 (-4) 50 (37)

0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300

Supercored 309MoL AWS A5.22/ASME SFA5.22 E309LMoT0-1/-4

JIS Z3323 YF309MoLC

Supercored 309MoL is designed for the application of resistance to corrosion and for the joining of stainless to mild or low alloy steel.

Applications


Notes on Usage


Supercored 309MoL which contains a high ferrite level in austenitic has excellent heat, corrosionand crack resistibility. It has a good stable arc and excellent slag removal properties.


Size mm (in)

F & HF



DC+ CO2

Ar+20~25% CO2




0.03 0.60 1.30 0.025 0.010 23.0 12.5 2.5



600 (87,000) 35 -20 (-4) 50 (37)

0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300



207

FLUX CORED WIRE

206

FLUX CORED WIRE

SF-430 AWS A5.9/ASME SFA5.9 EC430

Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% Ar)

T.S EL. Temp. CVN-Impact ValueHeat Treatment

N/mm2 (lbs/in2) (%) ( ) J (ft lbs)

770 (1418 )x4hr500 (72,600) 40 - - FC to 600 (1112 )

AC to RT

SF-430 is a metal cored wire for horizontal, fillet and flat position welding of 409 and 430 typestainless steel as found in ferrite stainless steel automotive mufflers.

Applications


Notes on Usage


This wire gives excellent bead appearance and provides the operator with a soft stable arc and verylow spatter levels thus giving enhanced cosmetic appearance.

Use welding grade Ar or Ar + 2~5%O2 gas.

Size mm (in)

F & HF

Dia. (mm) 1.2 Spool (kg) 12.5 15(in) .045 (lbs) 28 33


DC+ Ar

Ar+2~5% O2


Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% Ar)

C Si Mn P S Cr Ti

0.03 0.30 0.50 0.005 0.010 17.5 0.70

1.2 (.045)150~250

SF-409Ti AWS A5.9/ASME SFA5.9 EC409

SF-409Ti is a metal type flux cored wire designed for the horizontal fillet welding of AISI 409ferrite stainless steel.

Applications


Notes on Usage


This wire has been specifically formulated for use in the welding of automotive exhaust systemsand mufflers. It benefits from being spatter free and without slag formation when used with argonor argon oxygen mixed shielding gas. It also has an excellent deposition rate and corrosionresistance. High speed welding can be carried out with this product on thin plate material withoutburning through. SF-409Ti can be used in the welding of similar chemical composition alloys.


Size mm (in)

F & HF



DC+ Ar

Ar+2~5% O2



C Si Mn P S Cr Ti

0.03 0.50 0.55 0.012 0.010 12.5 1.0

Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% Ar)


500 (72,600) 20 - -

1.2 (.045)150~250



209

FLUX CORED WIRE

208

FLUX CORED WIRE

SC-439Ti Cored

SC-439Ti Cored is a metal cored wire designed for flat and horizontal fillet welding of AISI 439ferrite stainless steel.

Applications


Notes on Usage


This wire has been specifically formulated for use in the welding of automotive exhaust systemsand mufflers. It benefits from being spatter free and without slag formation when used inconjunction with argon or argon oxygen mixed shielding gas. It also has an excellent depositionrate and corrosion resistance. High speed welding can be carried out with this product on thin platematerial without burning through. SC-439Ti cored can used in the welding of similar chemicalcomposition alloys.


Size mm (in)

F & HF



DC+ Ar

Ar+2~5% O2



C Si Mn P S Cr Ti

0.03 0.30 0.60 0.005 0.010 18.5 0.75

1.2 (.045)

150~250


T.S EL.Heat Treatment

N/mm2 (lbs/in2) (%)

770 x4hr FC to 600

500 (72,600) 40 AC to RT

SF-436

SF-436 is a metal cored wire for horizontal, fillet and flat position welding of 409,430 and 436 typestainless steel as found in ferrite stainless steel automotive mufflers.

Applications


Notes on Usage


This wire gives excellent bead appearance and provides the operator with a soft stable arc and verylow spatter levels thus giving enhanced cosmetic appearance.


Size mm (in)

F & HF



DC+ Ar

Ar+2~5% O2



C Si Mn P S Cr Mo Ti

0.03 0.60 0.40 0.008 0.010 17.5 1.0 0.40

1.2 (.045)

150~250


T.S EL. Temp. CVN-Impact ValueHeat Treatment

N/mm2 (lbs/in2) (%) ( ) J (ft lbs)

770 x4hr500 (72,600) 35 - - FC to 600

AC to RT

Catalogo de Arames Tubulares (Hyundai)

Documents

Transcript of Catalogo de Arames Tubulares (Hyundai)