� LUIZ CARLOS MOREIRA BRANDÃO JUNIOR

Brazilian

Rua João Barros Moreira, 90 Aptº 301 Recreio dos Bandeirantes – Rio de Janeiro - RJ CEP 22795-095 Cel : (21) 99180-7667 ou (21) 99639-4208 Tel.: (21) 3325-7458 e/ou (21) 2547-2116

Doble citizenship: Passport European Union - Portugal, No. L395102

Portugal ID: 30336464

E-mail: Luizbrandao@odebrecht.com or Lcmbrandaojr@uol.com.br

� MAIN QUALIFICATIONS

- Lead assessor registered by IRCA / Great Britain (Nº A 005313)

- Lead auditor registered by RAB - Registrar Accreditation Board /USA

(Nº Q 05011).

- Auditor tierce partie by Ascert International / France (A852)

- Lead assessor auditing over 280 companies in the industrial areas of naval, nuclear, electronics, aerospace, industrial chemical and processing.

- Over 20 years dedicated to the area of quality with emphasis in quality assurance in the main factoring of heavy mechanical equipment, developing the career in important institutions as the Navy Ministry/CTM-SP, Setal Lummus, Persico Pizzamiglio and Confab Industrial.

- 8 years in the Ministry of Navy / CTM-SP managing the Department of Suppliers Inspection for the contracts of supply of equipment and materials for the navy experimental research center for steam and nuclear propulsion within the areas of mechanical, electrical, instrumentation and civil construction.

- Specialist in evaluation and implementation of quality system management in industry, especially for the requirements of the ISO 9000 series.

- Coordination of the areas of quality in the following companies: EMBRAER -Aircraft Manufacturer, Setal Lummus, Persico Pizzamiglio and Interhude Engenharia Química, managing quality system and their interfaces in the system of quality of the organization, development systems for evaluation/auditing of the suppliers.

- Supplier Quality Specialist: experience in automotive, aerospace, nuclear or similar manufacturing companies. Quality Management Processes, supplier quality management system.

- Qualified Embraer supplier auditor responsible for plan, audit, follow-up, develop and executes on full assessment’s analysis plans to provide a timely and consistent auditing process to established suppliers.

� EDUCATION

1980 Major in Mechanical Engineering

Santa Ursula University - Rio de Janeiro

1998-1999 MBA in Management and Standardization in the Aerospace Industry

São Paulo Sate University – UNESP, Guaratinguetá – São Paulo.

2005 – 2006 Master in Oil & Gas Engineering – Federal Fluminense University, Sao Jose dos Campos office, Sao Paulo

INTERNATIONAL ASSIGNMENTS

# On the job trainings at DCNS shipyard, Cherbourg, France on 2011, 2012 and 2013

# Several services assigned at USA, Russia, Spain, France, Holland, Switzerland, Austria, Germany, Russia, Argentina, Chile, Mexico, Peru

# EMBRAER representative in the AAQG (Americas Aerospace Quality Group) Standardization Committee and in the IAQG (International Aerospace Quality Group) – 2001 until 2006.

AAQG Quality groups addressed to the aerospace supply chain global system.

Period: May 2000 Indianapolis meeting to February 2006.

During this period I was engaged in some working groups (i.e.: AS9100B – revision; AS9110 - elaboration, AIR5359-revisions).

As well, at the same time from 2004 to 2006 representing the aerospace industry at the RMC (Register Management Committee), performing the Registers management and Auditors certification and approval.

Performing Oversight audits of INMETRO; RAB accreditations offices and of PJR; BVQi, ABS-QE and others.

# Moody International Certification Committee Member: From February 2006 to July 2006 aerospace specialist member of the Aerospace Certification Committee reviewing dozen of AS9100 certification´s processes.

� MAIN COURSES

- Lead Assessor training/ PE Batalas U.K.

- Quality Auditing in Servicing Companies/ DH International

- Metrology Confiability / LFM Rio de Janeiro

- Quality Engineering / IPT

- Aerospace Quality Assurance System/CTA

- Quality Assurance documentation / IBQN

- Quality Control / F.Getulio Vargas

- Metallurgy and Austenitic Steel welding / SGS

- Total Quality Control / Navy Ministry

- Environmental Legislation - ISO 14000 / EMBRAER/BVQI

- Occupational Health and Safety Manager System –

(OHSAS18001 / EMBRAER/QSP)

- Automotive Quality Systems requirements - QS 9000 / AIAG

- Introduction to Aircraft Manufacturing – EMBRAER

- Advanced Management Training Course – EMBRAER/AMANA-KEY

- AS 9100:2004 Auditor Aerospace Standard Course – EMBRAER/ATSG

(Mr. Rogerio Meira – AS9100 / AAQG / RAB approved instructor)

- Nuclear Lead Auditor training and examination) Georgia Tech/Arsenal –

Atlanta/GA, USA – January 19 e 22, 2010

PUBLISHED WORKS

“Quality Assurance of Welding consumers for Nuclear Construction”

Presented at 14º Inspection Equipment Seminar of Brazilian Oil Institute.

“The Quality Assurance in Nuclear Components - Class I for Nuclear Submarines”

Presented at the 2º meeting of Total Quality at High Technology Industries and research centers / ABS Out.93

PROFESSIONAL EXPERIENCE:

Itaguai Construções Navais - ICN (24 October 2010 up to now) Transferred by Odebrecht to a new contract, the ICN shipyard, a joint venture with DCNS. DCNS, controlled by the French government formed a special purpose entity (SPE) with Odebrecht for the construction of submarines called Itaguaí Naval Constructions (ICN), whose shareholders Odebrecht, with 59% and DCNS, with 41 %. The program includes the construction of four conventional submarines and a submarine with nuclear propulsion.

Quality Manager Main responsibilities: Manage the activities of control and quality assurance by evaluating the quality plans, inspection plans and tests, and key procedures; Act in the technical evaluation of subcontractors to verify their quality systems.

Responsible for managing the entire quality system, including the Quality Control, testing, inspection, quality and nondestructive testing. Deployment of the Quality Plan and procedures for inspection and testing in compliance with quality requirements for project contracts and suppliers equipments; Several missions in the DCNS Cherbourg / France for the transfer of technology; On the job training at DCNS Cherbourg in 2011, management of inspection activities / quality control in the construction of submarines.(More details on http://www.naval.com.br/blog/2015/02/24/ministro-jaques-wagner-visita-instalacoes-do-programa-de-desenvolvimento-de-submarinos-em-itaguai-rj/ )

Odebrecht Construction Company - Is the Odebrecht Group’s leading company in the Engineering and Construction business and the Latin America’s largest company in its sector. It manages and coordinates engineering, procurement, construction, civil engineering and specialized technology into integrated projects. It is active in real-estate development and is an internationally ranked participant in the energy, infrastructure, mining and public services sectors of construction. The company has been involved for over 60 years in the construction of buildings, dams, thermoelectric plants, hydroelectric plants and steel mills, nuclear and petrochemical complexes, refineries, tourism and leisure resorts, real-estate developments, subways, highways, railroads, bridges, ports and airports, equipment machinery for the oil and gas industry and for mining projects, basic sanitation and irrigation systems.

Main responsibilities: Quality Assurance Manager , performing civil, mechanical and electrical constructions of eight new industrial plants in the Getulio Vargas Refinery - REPAR, at Araucária (Parana State), of Petrobras. The contract concerns the construction of five gasoline plants and three of coke. One of the challenges of the enterprise is the simultaneous execution of the executive project, of the civil construction and of the industrial assembly the plants, which will have to be finish the constructions in the end of 2011. During the peak of the works, the project count approximately with 3,500 workforces.

Mauá Jurong Shipyard

One of the biggest shipyards of Brazil, currently concentrated in the construction of modules "topside", conversion, integration (hook up) of the offshore platforms; as well construction and repair of ships of all type. (Details at www.mauajurong.ind.br).

Quality Construction Manager (April 2006 up to May 2007)

Main responsibilities: The conversion of the Floating Production, Storage and Offloading FPSO P54 carried through in the Jurong Shipyard in Singapore and Integration and final assembly in the Maua Shipyard. Responsible for the QSMS (Quality, Safety and Environmental Management System), including tests, quality inspections and non-destructive testing examination. Implementation of the Quality Control Plan for inspection procedures and tests in the fulfillments of the requirements of quality for contracts of projects and carry over´s suppliers; Responsible for the system of certification of the units on board of the FPSO.

EMBRAER Empresa Brasileira de Aeronáutica S/A

A leading designer and manufacturer of commercial, executive and defense aircraft based in Sao José dos Campos. Engaged in a wide variety of regional or commuter and military aircraft programs. (Details at www.embraer.com ).

Quality Assurance Manager (March 1998 to March 2006)

Manager of the Quality Assurance Department with a strong customer orientation, as well the pertinent government regulatory and standards (with the pertinent third-party audits and survey). Also responsible for the SIG-MASSQ system (Integrated Manage System for Health, Safety, Environment and Quality System)

Control the implementation of the Integrated System (Quality, Environmental and Occupational and Safety Management Systems) according the FAA; JAA; CTA, EASA European Aviation Safety Agency, ISO 9001 AS 9100, ISO 14000 and OHSAS 18001 requirements and its actions and discrepancies.

Programs: Commercial Aircraft EMB-170/190, 90 to 110 seats, two turbofan engines; Regional Jet ERJ-145, 50 seats, two turbofan engines; Regional Jet ERJ-135, 37 seats, two turbofan engines; a twin turboprop, 30 passenger, EMB-120 Brasília; the Super Tucano EMB-314, light attack aircraft in single and two-seat version; and the advanced sub-sonic ground attack jets AMX and AMX-T.

Responsible for the Quality system and corporate survey to manufacturing, assembly and distribution for the following sites: EAC Embraer Aircraft Corporation (Fort Lauderdale - USA), EAI-Embraer Aircraft Industries (Le Bourget - France) Quality Systems, EAL Embraer Australia (Melbourne), and the Harbin Embraer Aircraft Industry (Harbin - China).

Responsible for the Quality Product Audit team in the assembly lines at Embraer São José dos Campos site during 2003 to 2006.

ABS - Quality Evaluations, Inc

American Bureau of Shipping - ABS.

Word lead company in the area of auditing and certifications ISO 9000/ISO 14000 and other national quality standards in over 50 countries, including United States and the European Community countries.

Quality System Lead Assessor (March 94 up to March 98)

Duties and accomplishments:

ISO Certification auditing the industry supply chain in over 250 companies (Brazil, Argentina, Chile, Peru and Mexico) and many different areas including aircraft and automotive manufacturers, naval industry, electronic, aerospace, nuclear, chemical industry and process.

Critical analyses of quality documents in the audited companies.

Coordination and presentation of courses and seminars about ISO 9000, International Certification of Quality as a topic.

Centro Tecnológico da Marinha - SP (CTM-SP)

Brazilian Navy Nuclear Research Center

Brazilian Navy Center for the design and development of naval nuclear propulsion for submarines nuclear powered (SSN) utilizing a pressurized water reactor. The program was called Chalana, and it became the top Brazilian naval weapons development program of the 1990´s.

Quality Inspection Division Manager (May/87 to Mar/94)

Duties and Accomplishments:

Management of Quality System according the AIEA-50C-QA and CNEN-NE-1.16 quality standards in the manufacturing of equipment and construction for nuclear processing plant for experimental installations for design and development of nuclear attack submarines (SSN) for the Brazilian Navy.

The Brazilian Navy has considered its nuclear submarine prototypes fleet, not research vessels.

Managing the Navy’s field inspectors for the supply chain with focus on quality system accordingly the SUBSAFE requirements.

Duties of quality assurance management, inspection and test personnel, quality engineering, internal and external QA program auditors, procurement and supplier control personnel, and facility personnel (as well as contractors) with defined responsibilities and authorities for the effective implementation of the quality assurance program and requirements; Quality System Lead Auditor in assessment in suppliers and subcontractors for evaluation of 2º party (ISO 9001; AQUAP’s; MIL-STD’s; MIL-STD-9858 and CNEN - Brazilian Nuclear Regulatory Commission requirements).

Manager of the QA Navy Division with four Departments: Mechanical; Instrumentation/Electrical; Incoming Inspection and Construction to meet the requirements for 10CFR50 Appendix B, ASME NQA-1, and ANSI N45.2.23.

SETAL-LUMMUS Engenharia e Construções S/A.

Engineering company and construction field belonging to the ASEA Brown Boveri Group acting in the areas of chemical and petrochemical.

Quality Inspection Supervisor (Mar/86 to May/87)

Duties and accomplishments:

Implementation of the inspection supervising system in the manufacturing of the components for the construction of offshore oil & gas Platforms at the supply chain.

Preparing of the quality control plan for procedures of inspection and testing.

Establishing the requirements of quality for contracts of projects and suppliers.

Implementation of the certification system of suppliers.

PERSICO PIZZAMIGLIO S/A

Company of the high technology field for the manufacturing of steel and stainless pipes welded by “ERW”; “PAW” and “GTAW’ process.

Head of the Quality Engineering Department (Nov/85-Mar/86)

Duties and Accomplishment:

Implementation of the Quality Assurance System in the company.

Development and improvement of non-destructive testing during the manufacturing process.

Head of the Department Shaped in four sectors:

Control of special process / documentation, metrology laboratory, standards / methodology.

INTERHUDE Engenharia Química Ltda.

Company of chemical belonging to the Hoechst Group, benefiting of the technology of its German subsidiary UHDE.

Quality Assurance Manager (APR/85 to Nov. /85)

Duties and Accomplishments:

Analyses and control of projects.

Managing of organizational interfaces in the implementation of programs of quality assurance in nuclear and industrial projects. Supervisor of Quality Inspections’.

CONFAB INDUSTRIAL S/A

Company manufacture of heavy equipment for the oil, petrochemical, metallurgical and nuclear areas.

Welding Engineer (Jan/83 to April/85)

Duties and Accomplishments:

Developing and planning of welding processes used in the manufacturer of components such as pressurized vessels, heat exchangers, chemical and petrochemical reactors, components for offshore equipment, multiwall vessel, etc.

Head of the manufacturing group of nuclear equipment, such as personal lock, pressure vessels for nuclear power plant (ANGRA 2)

Certified as welding engineer by the Brazilian Nuclear Quality Institute (IBQN) accordance with DIN-8563 and AD-HP-3 standards.

Responsible for training of welders, supervisors, welding plans and manufacturing planning.

Elaboration of welding procedures for quality control manual. Responsible for the transference of technology from German “Know-how parts” for nuclear works.

CEC-Equipamentos Marítimos e Industriais S/A

Manufacture of heavy equipment for naval, oil and petrochemical industry

Quality Control Supervisor (DEC/80 - Jan/83)

Duties and Accomplishments:

Planning and controlling of non destructive inspection

Coordination of inspection times for activities of quality control in assembling of components for off shore oil platforms.

Responsible for procedures, and implementation of offshore components.