Post on 08-Nov-2018
SUPLEMENTO AO DIPLOMA - UNIVERSIDADE DO MINHO
Programa doutoral em Engenharia Têxtil
(3º CICLO)
2/5
1 Principal(ais) área(s) de estudo da qualificação:
Ciência e Tecnologia Têxtil
2 Língua(s) de aprendizagem/avaliação:
Línguas Portuguesa e Inglesa / Línguas Portuguesa e Inglesa
3 Duração oficial do programa de estudos:
3 anos /6semestres/40 semanas de estudo a tempo inteiro por ano/180 créditos ECTS.
4. Requisito(s) de acesso:
Titulares do grau de mestre em Engenharia ou equivalente legal e os titulares do grau de licenciado (5 anos) em Engenharia Têxtil, Materiais, Química, Física e afins.
5. INFORMAÇÕES SOBRE O CONTEÚDO E OS RESULTADOS OBTIDOS
5.1 Regime de estudo:
A tempo inteiro.
5.2 Requisitos do programa de estudos:
O Programa inclui uma componente curricular de 60 ECTS, designada por Curso de Doutoramento, e uma dissertação com 120 ECTS. A componente curricular tem um plano de estudos definido individualmente para cada aluno, pela Comissão Directiva do Programa. A parte escolar integra Unidades Curriculares da área das Ciências e Tecnologias Complementares (UCs de Formação Horizontal) e Unidades Curriculares da área da Ciência e Tecnologia Têxtil (UCs de Formação Avançada I e Planeamento da Dissertação em Engenharia Têxtil). A obtenção do Grau de Doutor em Engenharia Têxtil implica a realização de 180 ECTS. Os alunos devem perfazer 60 ECTS para obtenção do Diploma de Estudos Avançados em Engenharia Têxtil.
5.3 Pormenores do programa de estudos e classificações/notas/créditos obtidos:
CRÉDITOS ÁREA CIENTÍFICA SIGLA OBRIGATÓRIOS
Ciência e Tecnologia Têxtil
Ciência e Tecnologias Complementares
CTT
CTC
165 ECTS
15 ECTS
TOTAL 180 ECTS
A listagem das unidades curriculares efectuadas na Universidade do Minho encontra-se em anexo (ver
Anexo I).
3/5
6. INFORMAÇÃO SOBRE A FUNÇÃO DA QUALIFICAÇÃO
6.2 Estatuto profissional:
Doutor
7. INFORMAÇÕES COMPLEMENTARES
7.2 Outras fontes de informação:
http://www.uminho.pt
http://www.gri.uminho.pt
4/5
ANEXO I
Plano de Estudos (3º Ciclo) Regime Horas/semana Área Total
Ano Científica Unidade Curricular 1ºS 2ºS HC HIL HINL 1ºS 2ºS Créditos
CTC Opção Comportamental e de Inovação I X 2 3 5 5
1ºsem CTC Opção Comportamental e de Inovação I I
X 2 3 5 5
CTC Opção Comportamental e de Inovação III
X 2 3 5 5
CTT Opção Cientifico-Tecnológica em Eng. Têxtil I
X 4 5 9 5
CTT Opção Cientifico-Tecnológica em Eng. Têxtil II
X 4 5 9 5
CTT Opção Cientifico-Tecnológica em Eng. Têxtil III
X 4 5 9 5
Total 42 30
CTT Opção Cientifico-Tecnológica em Eng. Têxtil IV
X 4 5 9 5
2ºsem CTT Opção Cientifico-Tecnológica em Eng. Têxtil V
X 4 5 9 5
CTT
Planeamento da Dissertação em Engenharia Têxtil X 6 20 26 15
Total 42 30
CTT
Projecto de I&D em Engenharia Têxtil - Dissertação X X 30
3ºsem Total 30
CTT
Projecto de I&D em Engenharia Têxtil - Dissertação X X 30
4ºsem Total 30
CTT
Projecto de I&D em Engenharia Têxtil - Dissertação X X 30
5ºsem Total 30
CTT
Projecto de I&D em Engenharia Têxtil - Dissertação X X 30
6ºsem Total 30
5/5
Unidade Curricular Créditos Área Científica
Opção Comportamental e de Inovação I 5 CTC
Opção Comportamental e de Inovação I I 5 CTC
Opção Comportamental e de Inovação III 5 CTC
Opção Cientifico-Tecnológica em Eng. Têxtil I 5 CTT
Opção Cientifico-Tecnológica em Eng. Têxtil II 5 CTT
Opção Cientifico-Tecnológica em Eng. Têxtil III 5 CTT
Opção Cientifico-Tecnológica em Eng. Têxtil IV 5 CTT
Opção Cientifico-Tecnológica em Eng. Têxtil V 5 CTT
Planeamento da Dissertação em Engenharia Têxtil 15 CTT
Projecto de I&D em Engenharia Têxtil - Dissertação 30 CTT
Legenda: Áreas Científicas CTT – Ciência e Tecnologia Têxtil
CTC- Ciências e Tecnologias Complementares
Horas/Semanas HC – Horas de contacto com o docente; HIL – Horas de trabalho independente no periodo lectivo (15 semanas de aulas/semestre) HINL – Horas de trabalho independente no periodo não lectivo (semanas)
1/5
DIPLOMA SUPLEMENT - UNIVERSIDADE OF MINHO
PhD Program in Textile Engineering
(3nd CYCLE)
2/5
1 Main Field of Studies for the qualification
Textile Science and Technology
2 Language of instruction
English and Portuguese/English and Portuguese
3 Official Length of Programme
3 years/ 6 semesters/40 weeks of full-time study per year/180 ECTS credits.
4 Access requirement(s)
Second cycle course in Engineering or legal equivalent and first cycle courses (5 years) in Textile, Materials, Chemistry and Physics Engineering.
5 Mode of Study
Full-time.
6 Programme Requirements The PhD programme includes a curricular component of 60 ECTS- PhD Course- and a doctoral thesis of 120 ECTS. The curriculum of the PhD course is individually defined for each student by the Programme Management Committee and includes Learning Units from the Complementary Sciences and Technologies area and Textile Science and Technology area. The PhD degree in Textile Engineering is obtained after 180 ECTS. Students must complete 60 ECTS to obtain the Advanced Studies Diploma in Textile Engineering.
7 Programme Details
COMPULSORY SCIENTIFIC ÁREA ACRONYM
CREDITS
Textile Science and Technology
Complementary Sciences and Technologies
CTT
CTC
165 ECTS
15 ECTS
TOTAL 180 ECTS The catalogue of the disciplines offered by the University of Minho is presented in the Appendix 1.
8 Professional Status
Doctor
3/5
9. Further information sources:
http://www.uminho.pt
http://www.gri.uminho.pt
4/5
APPENDIX I
Curriculum of the PhD Program in Textile Engineering
Curriculum (3rd Cycle) Semester Hours/week Scientific Total
Year Área Learning Unit 1ºS 2ºS HC HIL HINL 1ºS 2ºS Credits
CTC Behavioural and Innovation Option I X 2 3 5 5
1ºsem CTC
Behavioural and Innovation Option II X 2 3 5 5
CTC
Behavioural and Innovation Option III X 2 3 5 5
CTT
Scientific and Technology Option I X 4 5 9 5
CTT
Scientific and Technology Option II X 4 5 9 5
CTT
Scientific and Technology Option III X 4 5 9 5
Total 42 30
CTT
Scientific and Technology Option IV X 4 5 9 5
2ºsem CTT
Scientific and Technology Option V X 4 5 9 5
CTT
Thesis Planning in Textile Engineering X 6 20 26 15
Total 42 30
CTT
R&D Project in Textile Engineering - Thesis X X 30
3ºsem Total 30
CTT
R&D Project in Textile Engineering - Thesis X X 30
4ºsem Total 30
CTT
R&D Project in Textile Engineering - Thesis X X 30
5ºsem Total 30
CTT
R&D Project in Textile Engineering - Thesis X X 30
6ºsem Total 30
5/5
Learning Unit Credits Scientific area
Behavioural and Innovation Option I 5 CTC
Behavioural and Innovation Option II 5 CTC Behavioural and Innovation Option III 5 CTC Scientific and Technology Option I 5 CTT Scientific and Technology Option II 5 CTT Scientific and Technology Option III 5 CTT Scientific and Technology Option IV 5 CTT Scientific and Technology Option V 5 CTT Thesis Planning in Textile Engineering 15 CTT R&D Project in Textile Engineering - Thesis 30 CTT
Legend: Scientific Areas CTT – Textile Science and Technology
CTC- Complementary Sciences and Technologies
Hours/Week HC – Hours of contact with the teacher; HIL – Independent working hours in the period (15 weeks) HINL – Independent working hours out of the period (5 weeks)