Post on 06-Apr-2018
8/3/2019 Pedal Acelerador Electronico556
http://slidepdf.com/reader/full/pedal-acelerador-electronico556 1/3
Electronic Accelerator Pedal Assembly
Typical Application: Accelerator Pedal for Electronic ThrottleControl Systems
Features / Benefits:
• Dual Output Electrical Sensor Integrated into Pedalassembly
• Dual Load/Return Force Generation
• Self Adjusting Hysteresis Control
• Compact Size
• Optional Metal Mounting Inserts
• Kickdown Option
• Six Pin Connector Typical
• Optional Metal or Plastic Pedal Arm (per CustomerRequirements)
• Optional Customization to your Specific ApplicationRequirements
TYPICAL SPECIFICATIONS
ELECTRICAL
Linearity (ABS): See Figure No.1
Rotation (Electrical): 21.6°
Rotation (Mechanical): 22.3°
Typical Voltage: 5 VDC
Over Voltage: 18 VDC
Track Correlation: See Figure No.3 (Page 2)
MECHANICAL
Return Spring Torque: See Figure No.2
Stop Strength: 400 N
Mounting Bolt Torque: M6, 8 Nm
DURABILITY
Operating Temp. Range: -30°C to 85°C
Life (Multi-Strokes -30°C to 80°C):2 X 106 Cycles
Vibration: 5 to 100 Hz @ 0.2 to 1.6 g – 8 Hours
Thermal Shock: -30°C to 85°C: 40 Shocks
ENVIRONMENTAL
Salt Spray: 48 Hours (5% NaCl)
Humidity: 125 Hours @ 95% RH
Sealing: Per IP54
NOTE: These standard specifications have been met on existing production-tooled units that aretested on precise test equipment. Details are available including failure criteria. This data sheetdoes not constitute a warranty that the product will meet the above specifications while used inyour application or attached to your test equipment.
5 5 6 S e
r i e s
HEADQUARCTS Automotive Pro
1142 W. BeardsleElkhart, IN 4651
Tel: 574-295Fax: 574-295
www.ctscor
SALES OF – N. A
CTS Automotive Pro
Southfield, MTel::248-359Fax: 248-359
– ECTS Corporation U
High Blantyre, GlSc
Tel: +44 (0)1698 5Fax: +44 (0)1698 5
– FaCTS Japa
Kanagawa-ku, Yoko
Tel: (81) 45-450Fax: (81) 45-450
Date: Revised: 1
CTS®
8/3/2019 Pedal Acelerador Electronico556
http://slidepdf.com/reader/full/pedal-acelerador-electronico556 2/3
Application Notes 5 5 6 S er i e s
HEADQUARCTS Automotive Pro
1142 W. BeardsleElkhart, IN 4651
Tel: 574-295Fax: 574-295
www.ctscor
SALES OF
– N. ACTS Automotive ProSouthfield, MTel: 248-359
Fax: 248-359
– ECTS Corporation U
High Blantyre, GlSc
Tel: +44 (0)1698 5Fax: +44 (0)1698 5
– FaCTS Japa
Kanagawa-ku, Yoko
Tel: (81) 45-450Fax: (81) 45-450
Date: Revised: 1
Electrical Output Characteristic
Figure No. 1
92%
84%
88%
15%
7.5%
16%
14%
Output No. 1
Output No. 2
44%
70 N
35 N
18 N
17.5 N
>5 N
0° 18°
Mech.
Travel Full gas manual
Full gas
automatic
Kickdown Area
Mechanical Output Characteristic
Figure No. 2
21.6
0% 21.6°18 0°
Mech.Travel
End stop
manual End stop
automatic
VS /VO
8/3/2019 Pedal Acelerador Electronico556
http://slidepdf.com/reader/full/pedal-acelerador-electronico556 3/3
Dimensional Details (mm) & Standard Electrical Output
5 5 6 S e
r i e s
HEADQUARCTS Automotive Pro
1142 W. BeardsleElkhart, IN 4651
Tel: 574-295Fax: 574-295
www.ctscor
SALES OF
– N. ACTS Automotive ProSouthfield, MTel: 248-359
Fax: 248-359
– ECTS Corporation U
High Blantyre, GlSc
Tel: +44 (0)1698 5Fax: +44 (0)1698 5
– FaCTS Japa
Kanagawa-ku, Yoko
Tel: (81) 45-450Fax: (81) 45-450
Date: Revised: 1
PIN CONFIGURATION
PIN No. DESIGNATION1 PPS 22 +5V PPS23 +5V PPS14 PPS15 GROUND PPS16 GROUND PPS2
Signal 2 required defined with respect to Signal 1Signal 1 Signal 2Supply 1 Supply 2
Tracking value as per Figure 3 shown
-2
100%
Track CorrelationFigure No. 3
0% 15%
1%
2%
3%
Mechanical Travel
Tracking