Post on 19-Apr-2017
Tel: 55 11 4998-4155 SalesTel: 55 11 4998-4188 Technicalwebcabos@prysmiangroup.comwww.prysmiangroup.com.br
SH
DM
V1
–O
CT´12
A Prysmian Group reserva-se ao direito de modificar sem prévio aviso as características técnicas, pesos e dimensões apresentadas neste catálogo,sempre respeitando os valores previstos nas normas citadas. A Prysmian Group não se responsabiliza por danos ou materiais decorrentes do usoinadequado e/ou negligente das informações contidas neste catálogo.Prysmian Group reserves the right to modify without notice the specifications, weights and dimensions shown in this catalog, always respecting thevalues provided in the standards listed. The Prysmian Group is not responsible for damage or material arising from improper use and / or negligent of theinformation contained in this catalog.
Cabo SHDM / SHDM Cable1,8/3 kV - 3,6/6 kV – 6/10 kV – 8,7/15 kV – 12/20 kV – 15/25 kV
Descrição:
Os cabos móveis tipo SHDM sãoindicados para a alimentação principal edistribuição de energia elétrica em minassubterrâneas. Os cabos SHDM preveemtrês condutores de energia isolados eblindados e três condutores deaterramento sem isolação usados emcircuitos c.a trifásicos.
Description:
SHDM cable type are suitable for energyfeeding and mining energy distributionSHDM cables are composed of threeinsulated power cores, three non-insulatedgrounding conductor non-insulated used ina.c three phase circuits.
Função:
Alimentar a energia da máquina,oferecendo ao mesmo tempo excelenteflexibilidade e grande resistência assolicitações mecânicas.
Function:
Powering the machine and offeringexcelent flexibility and high resistance tomechanical resistence at the same time.
Utilizados em:Empilhadeiras
Recuperadores
Escavadeiras
Equipamentos portuários
Pórticos
Used in:Stackers
Reclaimers
Excavators
Port facilities
Gantry
Tel: 55 11 4998-4155 SalesTel: 55 11 4998-4188 Technicalwebcabos@prysmiangroup.comwww.prysmiangroup.com.br
SH
DM
V1
–O
CT´12
A Prysmian Group reserva-se ao direito de modificar sem prévio aviso as características técnicas, pesos e dimensões apresentadas neste catálogo,sempre respeitando os valores previstos nas normas citadas. A Prysmian Group não se responsabiliza por danos ou materiais decorrentes do usoinadequado e/ou negligente das informações contidas neste catálogo.Prysmian Group reserves the right to modify without notice the specifications, weights and dimensions shown in this catalog, always respecting thevalues provided in the standards listed. The Prysmian Group is not responsible for damage or material arising from improper use and / or negligent of theinformation contained in this catalog.
Cabo SHDM / SDHM Cable1,8/3 - 3,6/6 kV – 6/10 kV – 8,7/15 kV – 12/20 kV – 15/25 kV
Condutor 1 Fios de cobre de alta condutibilidade, têmpera mole e estanhados.Excelente flexibilidade (classe 5).
Conductor Copper wires of high conductivity, annealed and tinned. Excellentflexibility (class 5).
Blindagem do condutor Camada de fita semicondutora e camada de semicondutora feitaatravés de tríplice extrusão.
Conductor shield 2 Semiconducting tape and semiconducting layer made by tripleextrusion.
Isolação
3
EPR de alta rigidez dielétrica, proporcionando excelente estabilidadeao envelhecimento térmico, baixa absorção de umidade, granderesistência à compressão e ótima flexibilidade.
Insulation EPR with high electrical rigidity, providing excellent stability tothermal aging, low moisture absorption, high compressive strengthand great flexibility.
Blindagem da Isolação Camada extrudada e fita semicondutora. Sobre a fita é aplicadauma trança mista de cobre e poliéster que permite um caminho debaixa impedância em condições de curto-circuito.
Insulation shield 4 Extruded layer and semiconducting tape. The tape is applied on abranding of copper and polyester wich provides a low impedancepath in short circuit conditions.
Cobertura
5
Dupla camada extrudada e vulcanizada, recebendo internamenteuma trança de cordonéis de poliéster. O composto de Neopreneutilizado possui grande resistência as solicitações mecânicas.Opcionalmente a cobertura poderá ser produzida em Poliuretano.
Coverage Dual layer extruded and vulcanized getting inside a braid ofpolyester cords.The Neoprene compound possess high resistance tomechanical stresses. Alternatvely the cover may be produced inpolyurethane.
12345
Tel: 55 11 4998-4155 SalesTel: 55 11 4998-4188 Technicalwebcabos@prysmiangroup.comwww.prysmiangroup.com.br
SH
DM
V1
–O
CT´12
A Prysmian Group reserva-se ao direito de modificar sem prévio aviso as características técnicas, pesos e dimensões apresentadas neste catálogo,sempre respeitando os valores previstos nas normas citadas. A Prysmian Group não se responsabiliza por danos ou materiais decorrentes do usoinadequado e/ou negligente das informações contidas neste catálogo.Prysmian Group reserves the right to modify without notice the specifications, weights and dimensions shown in this catalog, always respecting thevalues provided in the standards listed. The Prysmian Group is not responsible for damage or material arising from improper use and / or negligent of theinformation contained in this catalog.
Identificação: Fios coloridos de poliesterque compõem a trança dablindagem.
Temperaturas máxdo condutor:
90ºC em serviço contínuo,130°C em sobrecarga,250ºC em curto-circuito.
Normas aplicáveis: NBR 9375 – Cabos depotência com isolaçãosólida extrudada deborracha etilenopropileno(EPR) blindados,paraligações móveis deequipamentos para tensõesde 3kV a 25kV.
Identification: Colored polyester cordsthat make up the braidshield.
Maximumconductor
temperature:
90ºC in continuousoperation, 130°C overload,250ºC short-circuit.
Standards: NBR 9375 – Power cableswith extruded solidinsulationethylenepropylene rubber(EPR) armored, mobileconnections for equipmentfor voltages from 3kV to25kV.
Seção
(Fase+Terra)
Size
(Phase+Ground)
Diâmetro
Condutor
Fase
Phase
Conductor
Diameter
Diâmetro
Isolação
Insulation
Diameter
Diâmetro
ExternoMax.
Max
Outer
Diameter
Peso
Weight
Parâmetro elétricos
Eletrical parameters
Ampacidade
Ampacity
Rcc
20ºCXL XC
(mm²) (mm) (mm) (mm) (kg/km) (A*) (Ω/km) (Ω/km) (uF/km)
*Instalado ao ar livre, temperatura ambiente de 40ºC / * Installed in free air , ambient temperature of 40ºC
Raio Mínimo de Curvatura = 8 x Diâmetro externo do cabo / Minimum Bending Radius = 8 x Outer diameter of the cable
Dados Técnicos / Technical Data
SHDM – 1,8/3 kV
3x25+3x10 6,8 12,9 46,4 3.155 122 0,795 0,129 8.421
3x35+3x10 8,2 14,2 49,2 3.590 151 0,565 0,121 7.329
3x50+3x10 9,8 15,8 52,8 4.210 189 0,393 0,115 6.338
3x70+3x16 11,7 18,1 58,8 5.375 233 0,277 0,111 5.947
3x95+3x16 13,4 19,9 62,7 6.225 275 0,210 0,107 5.314
3x120+3x25 15,6 22,0 67,4 7.445 320 0,164 0,103 4.704
3x150+3x25 16,9 23,4 72,1 8.445 365 0,132 0,101 4.396
3x185+3x35 18,8 25,2 76,0 10.045 405 0,108 0,098 4.030
SHDM – 3,6/6 kV
3x16+3x6 5,5 13,3 49,9 2.705 95 1,240 0,147 11.892
3x25+3x10 6,8 14,5 49,9 3.451 122 0,795 0,136 10.281
3x35+3x10 8,2 15,8 52,7 3.900 151 0,565 0,129 9.028
3x50+3x10 9,8 17,5 57,4 4.690 189 0,393 0,121 7.919
3x70+3x16 11,7 19,2 61,4 5.640 233 0,277 0,115 6.894
3x95+3x16 13,4 21,1 65,2 6.500 275 0,210 0,111 6.247
3x120+3x25 15,6 23,2 69,9 7.735 320 0,164 0,107 5.548
3x150+3x25 16,9 24,5 74,6 8.755 365 0,132 0,104 5.147
3x185+3x35 18,8 26,4 78,6 10.370 405 0,108 0,102 4.765
Tel: 55 11 4998-4155 SalesTel: 55 11 4998-4188 Technicalwebcabos@prysmiangroup.comwww.prysmiangroup.com.br
SH
DM
V1
–O
CT´12
A Prysmian Group reserva-se ao direito de modificar sem prévio aviso as características técnicas, pesos e dimensões apresentadas neste catálogo,sempre respeitando os valores previstos nas normas citadas. A Prysmian Group não se responsabiliza por danos ou materiais decorrentes do usoinadequado e/ou negligente das informações contidas neste catálogo.Prysmian Group reserves the right to modify without notice the specifications, weights and dimensions shown in this catalog, always respecting thevalues provided in the standards listed. The Prysmian Group is not responsible for damage or material arising from improper use and / or negligent of theinformation contained in this catalog.
Seção
(Fase+Terra+
Verificação)
Size
(Phase+Ground+
Check)
Diâmetro
Condutor
Fase
Phase
Conductor
Diameter
Diâmetro
Isolação
Insulation
Diameter
Diâmetro
ExternoMax.
Max
Outer
Diameter
Peso
Weight
Parâmetro elétricos
Eletrical parameters
Ampacidade
Ampacity
Rcc
20ºCXL XC
(mm²) (mm) (mm) (mm) (kg/km) (A*) (Ω/km) (Ω/km) (uF/km)
*Instalado ao ar livre, temperatura ambiente de 40ºC / * Installed in free air , ambient temperature of 40ºC
Raio Mínimo de Curvatura = 8 x Diâmetro externo / Minimum Bending Radius = 8 x Outer diameter of the cable
Dados Técnicos / Technical Data
SHDM – 6/10 kV
3x25+3x10 6,8 15,4 51,8 3.630 122 0,795 0,141 11.240
3x35+3x10 8,2 16,7 54,6 4.080 151 0,565 0,132 9.910
3x50+3x10 9,8 18,3 59,4 4.885 189 0,393 0,125 8.676
3x70+3x16 11,7 20,1 63,3 5.845 233 0,277 0,118 7.624
3x95+3x16 13,4 21,9 67,2 6.715 275 0,210 0,114 6.862
3x120+3x25 15,6 24,1 73,7 8.260 320 0,164 0,109 6.126
3x150+3x25 16,9 25,4 76,5 8.995 365 0,132 0,107 5.721
3x185+3x35 18,8 27,3 80,5 10.620 405 0,108 0,104 5.298
SHDM – 8,7/15 kV
3x25+3x10 6,8 17,6 57,8 4.230 122 0,795 0,150 13.365
3x35+3x10 8,2 18,9 60,5 4.705 151 0,565 0,141 11.879
3x50+3x10 9,8 20,5 64,1 5.380 189 0,393 0,133 10.482
3x70+3x16 11,7 22,3 68,1 6.360 233 0,277 0,126 9.277
3x95+3x16 13,4 24,1 73,7 7.555 275 0,210 0,120 8.385
3x120+3x25 15,6 26,3 78,4 8.850 320 0,164 0,115 7.517
3x150+3x25 16,9 27,6 81,3 9.600 365 0,132 0,113 7.044
SHDM – 12/20 kV
3x35+3x10 8,2 21,0 65,1 5.185 151 0,565 0,148 13.556
3x50+3x10 9,8 22,7 70,4 6.165 189 0,393 0,140 12.070
3x70+3x16 11,7 24,4 74,4 7.185 233 0,277 0,132 10.709
3x95+3x16 13,4 26,2 78,3 8.115 275 0,210 0,126 9.715
SHDM – 15/25 kV
3x50+3x10 9,8 25,3 76,1 6.840 189 0,393 0,147 13.799
3x70+3x16 11,7 27,1 80,1 7.890 233 0,277 0,139 12.373